Toshiba Bsa4tp User Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33048 2.9 Print Test
 
E2-48 
2.9 Print Test 
 
 
 
 
 
 
 
  After your operating environment has been set, perform a print test. 
 
1.
  Perform a print test by using the Printer Driver or an Issue Command. 
 
  The printer driver’s Properties screen allows you to set the  communication conditions, media size, and other printing conditions 
in accordance with your operating environment.  For details, refer to 
the  Help for the  Windows Printer Drivers  screen....

2. PRINTER SETUP ENGLISH VERSION EO1-33048 2.9 Print Test
 
E2-49 
2.9  Print Test (Cont.) 
 
   
 
It is necessary to set the issue mode, 
cut/strip position, etc. for the Printer 
Driver or TPCL (TEC Printer Command Language) in accordance with 
your printing condition.   
For details of the TPCL, refer to the  B-SA4T Series External 
Equipment Interface Specification  stored in the CD-ROM.  
Regarding how to use the Printer Driver, refer to the  Help for the 
Windows Printer Drivers  screen.  
 
To...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.10 Position and Print Tone Fine Adjustment
 
E2-50 
2.10  Position and Print  Tone Fine 
Adjustment 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  This section describes how to fine adju
st a print start position, cut/strip 
position, reverse feed amount, print tone, and ribbon motor torque. 
When a fine adjustment is required, such as print start position, print tone, 
etc, follow the procedure below.  
 
1.   Turn on the printer and confirm that...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.10 Position and Print Tone Fine Adjustment
 
E2-51 
2.10  Position and Print  Tone Fine 
Adjustment (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  The Parameter Fine Adjustment Mode contains sub menus for adjusting 
a print start position, cut/strip position, print tone, ribbon motor torque, 
and setting the threshold.   
Each time the 
[PAUSE] key is pressed, the sub menus are displayed 
sequentially.  
 
 
 
 
Feed Amount Fine Adjustment:...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.10 Position and Print Tone Fine Adjustment
 
E2-52 
2.10  Position and Print  Tone Fine 
Adjustment (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After selecting a fine adjustment value, press the  [PAUSE] key.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Print Start Position Fine Adjustment
[RESTART]
[FEED]
FEED ADJ.+50.0mm 
FEED ADJ.+49.9mm 
FEED ADJ.+0.0mm 
FEED ADJ.-49.9mm 
FEED ADJ.-50.0mm 
FEED ADJ.+0.1mm...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.10 Position and Print Tone Fine Adjustment
 
E2-53 
2.10  Position and Print  Tone Fine 
Adjustment (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After selecting a fine adjustment value, press the  [PAUSE] key.  
 
 
 
 
 
 
Cut/Strip Position Fine Adjustment 
ADJUST SET 
CUT ADJ. +10.0mm 
[RESTART]
[FEED]
CUT ADJ.+50.0mm 
CUT ADJ.+49.9mm 
CUT ADJ.+0.0mm 
CUT ADJ.-49.9mm 
CUT ADJ.-50.0mm 
CUT ADJ.+0.1mm 
CUT ADJ.-0.1mm...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.10 Position and Print Tone Fine Adjustment
 
E2-54 
 
 
 
 
 
 
 
 
 
 •  Example of Strip Position Fine Adjustment 
 
  When setting +3.0 mm  
  Compared with “+0.0mm” position, the stop position  after printing is shifted forward. 
 
 
 
 
  When setting +0.0 mm
 
  
 
 
 
 
  When setting –3.0 mm
 
  Compared with “+0.0mm” position, the stop position  after printing is shifted backward.  
 
Label 
Print Head 
Platen 
Strip Plate 
Backing Paper 
3mm
Stop...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.10 Position and Print Tone Fine Adjustment
 
E2-55 
2.10  Position and Print  Tone Fine 
Adjustment (Cont.) 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After selecting a fine adjustment value, press the  [PAUSE] key. 
 
 
Reverse Feed Amount Fine Adjustment 
NOTES: 
Choose a desired value by using the
[RESTART] or [FEED] key.  
Pressing the [FEED]  key one time
causes a –0.1mm change, up to  
–9.9 mm. 
Pressing the [RESTART]  key one
time causes...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.10 Position and Print Tone Fine Adjustment
 
E2-56 
2.10  Position and Print  Tone Fine 
Adjustment (Cont.) 
 
 
 
 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After selecting a fine adjustment value, press the 
[PAUSE] key. 
 
 
 
 
 
 
 
X Coordinate Fine Adjustment
NOTES: 
Choose a desired value by using the
[RESTART] or [FEED] key.  
Pressing the [FEED]  key one time
causes a –0.1mm change, up to  
–99.9 mm. 
Pressing the [RESTART]  key...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.10 Position and Print Tone Fine Adjustment
 
E2-57 
2.10  Position and Print  Tone Fine 
Adjustment (Cont.) 
 
 
 
 
 
 
 
 
   
 
 
  Thermal Transfer Print  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After selecting a fine adjustment valu e or to skip this menu, press the 
[PAUSE]  key. 
 
 
 
  Thermal Direct Print  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After selecting a fine adjustment valu e or to skip this menu, press the 
[PAUSE]  key. 
 
 
 
 
 
Print...