Toshiba Bsa4tp User Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.7 Setting an Operating Environment
 
E2-18 
2.7.2 Parameter Setting  (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
The Parameter Setting Mode contains  sub menus for selecting a language 
and setting the communication parameters.  Each time the  [PAUSE] key 
is pressed, the sub menus are displayed sequentially. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
Baud rate selection 
[PAUSE]
PARAMETER SET
SPEED...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.7 Setting an Operating Environment
 
E2-19 
2.7.2 Parameter Setting  (Cont.) 
„ Serial (RS-232C) Interface  
 
  
Properties screen of Serial (COM) port 
under Windows98 
 
 
 
 
 
 
 
   
 
 
The following parameters of the RS-232C interface can be set: 
 Baud rate 
 Data length 
 Stop bit 
 Parity 
  Flow control  
 
Set these in accordance with the setting of your host computer. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(1)  Baud Rate  
This parameter is to choose a...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.7 Setting an Operating Environment
 
E2-20 
2.7.2 Parameter Setting  (Cont.) 
„ Serial (RS-232C) Interface  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
(2) Data Length 
This parameter is to choose a data
 length of the RS-232C interface. 
As “8 bits” has been chosen as defau lt, change it in accordance with your 
PC. 
 
 
 
 
 
 
 
 
After making a choice, press the  [PAUSE] key.   
 
 
(3) Stop Bit 
This parameter is to choose a stop bit of the RS-232C interface....

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.7 Setting an Operating Environment
 
E2-21 
2.7.2 Parameter Setting  (Cont.) 
„ Serial (RS-232C) Interface  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
„  LCD Message Language   
 
 
(5) Flow Control 
This parameter is to choose a flow control of the RS-232C interface. 
As “XON+READ AUTO” has been c
hosen as default, change it in 
accordance with your PC.  
 
 
 
 
 
 
 
 
 
 
 
 
  XON/XOFF AUTO:  XON/XOFF mode  (Software Flow Control)...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.7 Setting an Operating Environment
 
E2-22 
2.7.2 Parameter Setting  (Cont.) 
„ Parallel (Centronics) Interface  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
„  Web Printer Function when 
using TCP/IP (LAN)
 
 
 
 
 
This parameter is to choose an  ACK/BUSY timing of the parallel 
interface. 
“TYPE1” has been chosen as default,  but if a communication error occurs 
or a communication is not properly made, change to “TYPE2”.  
 
 
 
 
 
 
 
 
 
After making a choice,...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.7 Setting an Operating Environment
 
E2-23 
2.7.2 Parameter Setting  (Cont.) 
„ Plug & Play  
 
 
 
   
 
 
This parameter is to enable or disable the plug & play function. 
As “OFF” has been chosen as default,
 change it when this function is 
used.  
If the printer and the PC are connected by USB, plug & play will be 
automatically enabled, regardless of the setting of this parameter.  
 
 
 
 
 
 
 
 
 
After making a choice, press the  [PAUSE] key....

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.7 Setting an Operating Environment
 
E2-24 
2.7.3  IP Address Setting  (TCP/IP) 
 
 
 
 
 
  When the printer is connected to a PC through TCP/IP by using a LAN 
cable, it is necessary to set an IP address in the System Mode for system 
administrators.  
 
The System Mode for system administrators consists of the following 
menus.  
 
 
 
 
 
 
DIAG.  Vx.x  This menu is used
 to check and print the printer 
system information and maintenance counter 
status....

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.7 Setting an Operating Environment
 
E2-25 
2.7.3  IP Address Setting  (TCP/IP) (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  In this section, how to set the IP address is described. 
First, you need to access the System Mode for system administrators. 
 
 
 
 
 
 
 
 
 
 
 
1.
 While holding down the  [FEED] and [PAUSE]  keys, turn on the 
printer. 
 
 
 
 
 
 
2.  When “RESET” appears on the LCD Message Display, release 
the...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.7 Setting an Operating Environment
 
E2-26 
2.7.3  IP Address Setting  (TCP/IP) (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  The IP Address Setting Mode contains the following sub menus.  To 
enter each sub menu, press the 
[PAUSE] key. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(1)  Printer IP Address  
This parameter is to set an IP address. 
 
 
 IP ADDRESS 
PRINTER IP ADRES 
IP ADDRESS 
GATEWAY IP ADRES
 
IP...

2. PRINTER SETUP ENGLISH VERSION EO1-33048 
2.7 Setting an Operating Environment
 
E2-27 
2.7.3  IP Address Setting  (TCP/IP) (Cont.) 
 
  (2)  Gateway IP Address  
This parameter is to set a Gateway IP address. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(3)  Subnet Mask  
This parameter is to set a Subnet Mask. 
 
 
IP ADDRESS 
SUBNET MASK
 
IP ADDRESS 
255 . 255 . 255 . 000
 
IP ADDRESS 
255 . 255 . 255 . 000
 
IP ADDRESS 
255 . 255 . 255 . 000
 
IP ADDRESS 
255 . 255 . 255 . 000...