Toshiba Bsx4t Manual
Have a look at the manual Toshiba Bsx4t Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
GLOSSARIES ENGLISH VERSION EO1-33034 GLOSSARIES Pre-printed media A type of media on which characters, logos, and other designs have been already printed. Print head element The thermal print head consists of a single line of tiny resistive elements and when current is allowed to flow through each element it heats up causing a small dot to be burned onto thermal paper or a small dot of ink to be transferred from a thermal ribbon to ordinary paper. Print speed The speed at which printing occurs. This speed is expressed in units of ips (inches per second). Reflective sensor See Black mark sensor. Resolution The degree of detail to which an image can be duplicated. The minimum unit of divided image is called a pixel. As the resolution becomes higher, the number of pixels increased, resulting in more detailed image Ribbon An inked film used to transfer an image onto the media. In the thermal transfer printing, it is heated by the thermal print head, causing an image to be transferred onto the media Strip mode A device used to remove labels from the backing paper. Supply Media and ribbon Tag A type of media with no adhesive. Usually tags are made of cardboard or other durable material. Thermal direct printing A printing method using no ribbon, but thermal media which reacts to heat. The thermal print head heats the thermal media directly, causing print image to be printed on the media. Thermal print head A print head using thermal transfer or thermal direct printing method. Thermal transfer printing A printing method that the thermal print head heats an ink or resin coating on the ribbon against the media, causing the ink/resin to transfer onto the media. Threshold setting A sensor setting operation to have the printer maintain a constant print position of pre-printed media. Transmissive sensor See Feed gap sensor. USB (Universal Serial Bus) An interface that is used to connect peripherals, such as a printer, keyboard, mouse. The USB allows disconnection of a USB device without turning off the power.
INDEX ENGLISH VERSION EO1-33034 INDEX INDEX A Auto ribbon saving 2-11 B Backing paper A1-3 Bar code A1-1 Batch mode 2-9 Black mark 2-8, A1-2, A1-4 Black mark length A1-3 Black mark sensor 2-8, 4-1 Built-in rewinder 2-10 C Centronics 1-3, 2-3 Cut mode 2-10 Cutter module 2-10, 4-2, A1-2 D Dimensions 1-3 E Effective Print length A1-3 Effective print width A1-3 ERROR LED 1-4, 3-1 Error message 5-1 Expansion I/O interface 1-3, 2-3 Expansion I/O interface board A1-2 F Fan filter 2-2 Feed gap sensor 2-8, 4-1 FEED key 1-4, 3-1 Flash memory card 2-12 G Gap 2-8, A1-3 Gap length A1-3 Guaranteed print area A1-5 H Head lever 1-4, 2-6 I Interface 2-3, A1-1, A3-1 Issue mode 2-9, A1-1 J Jammed media 5-3 L Label 2-6, A1-2, A1-3 LCD message display 1-3, 1-4, 3-1 M Media 2-6, 4-3, A1-2 Media length A1-3 Media pitch A1-3 Media sensor 2-8 O ON LINE LED 1-4, 3-1 Operation Panel 1-3, 1-4, 3-1 P Parallel interface 1-3 Parallel port 2-3 PAUSE key 1-4, 3-1 PCMCIA card 2-12 PCMCIA interface board 2-12, A1-2 Platen 1-4, 4-1 Power consumption A1-1 Power cord 1-2, 2-4 POWER LED 1-4, 3-1 Power switch 1-3, 2-4, 2-5 Pre-printed media 4-3, 5-4 Print head 1-4, 4-1 Print head block 1-4 Printing method A1-1 Printing speed A1-1 R Reflective sensor 2-13, A1-4 Resolution A1-1 RESTART key 1-4, 3-1 Ribbon 2-11, 4-3, A1-5 Ribbon shaft 1-4, 2-11 Ribbon stopper 1-4, 2-11 Ribbon width A1-5 Rotation A1-1 RS-232C 1-3, 2-3, A3-1
INDEX ENGLISH VERSION EO1-33034 INDEX S Serial interface 1-3 Strip mode 2-9 Strip module 2-9, A1-2 Supply voltage A1-1 T Tag A1-2 Test print 2-13 Thermal direct 2-13, A1-1 Thermal transfer 2-13, A1-1 Threshold setting 5-4 Transmissive sensor 2-13, A1-3 Two-dimensional code A1-1 U USB interface 1-3, 2-3, A1-2 W Weight A1-1
EO30-33015 1 This supplement is applicable to the following Owner’s Manuals: · B-SX4T Series (EO1-33034) · B-SX5T Series (EO1-33036) Precautions for using the Ribbon Saving Function The ribbon saving module is standard on the B-SX5T series, but not on the B-SX4T series. Also, the ribbon saving function has been set to off by the parameter setting when the printer is delivered. Therefore, to use the ribbon saving function on the B-SX4T series, it is necessary to install the B-9904-R-QM optional ribbon saving module and to enable the ribbon saving function by the parameter setting. Regarding the B-SX5T series, you only need to enable the ribbon saving function by the parameter setting. When enabling the ribbon saving function, it must be set depending on the head lever position. For details, please contact the nearest TOSHIBA TEC service representative or sales agent. Printer model and option Head lever position Parameter setting Ribbon saving function B-SX5T-TS12-QQ B-SX5T-TS12-QP B-SX4T-TS10-QQ B-SX4T-TS10-QP Position : Label or Position ‚: Tag RBN SAVE OFF (Default) Disabled Position : Label RBN SAVE ON(Label) Enabled for label B-SX5T-TS12-QQ B-SX5T-TS12-QP B-SX4T-TS10-QQ + B-9904-R-QM B-SX4T-TS10-QP + B-9904-R-QM Position ‚: Tag RBN SAVE ON(TAG) Enabled for tag paper NOTES: 1. Be sure to match the parameter setting to the head lever position according to the media type. Mismatching may cause a failure of the ribbon saving module. 2. The amount of the saved ribbon differs depending on the print pattern and print speed. 3. When the head lever position is set to Position ‚: Tag and “RBN SAVE ON(TAG)” is selected, the amount of the saved ribbon is a little less than that of “RBN SAVE ON(Label)” with the head lever position : Label due to a control of the mechanism. SUPPLEMENT FOR OWNER’S MANUAL TEC B-SX4T and B-SX5T SERIES
CE Compliance (for EU only) This product complies with the requirements of EMC and Low Voltage Directives including their amendments. VORSICHT: · Schallemission: unter 70dB (A) nach DIN 45635 (oder ISO 7779) · Die für das Gerät Vorgesehene Steckdose muß in der Nähe des Gerätes und leicht zugänglich sein. Copyright © 2003 by TOSHIBA TEC CORPORATION All Rights Reserved 570 Ohito, Ohito-cho, Tagata-gun, Shizuoka-ken, JAPAN Centronics is a registered trademark of Centronics Data Computer Corp. Microsoft is a registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. As an ENERGY STAR® Partner, TOSHIBA TEC has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. -- Outline of the International ENERGY STAR® Office Equipment Program -- The International ENERGY STAR ® Office Equipment Program is an international program that promotes energy saving through the penetration of energy efficient computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos are uniform among participating nations. ENERGY STAR is a U.S. registered mark. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable rotection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and sed in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. (for USA only) Changes or modifications not expressly approved by manufacturer for compliance could void the user’s authority to operate the equipment. “This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.” “Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.” (for CANADA only)