Toshiba LCD Television Ragza Owners Manual

							TVbackpanelconnections
Foranexplanationofcable typesandconnections, seepages12-19.
----HllMllN-----,HLlml
~
I
8
1 DIGITAL AUDIOOUT-Optical audiooutput inDolby
Digital
orPCM (pulse-code modulation) formatfor
connecting anexternal DolbyDigital decoder, amplifier,
ANreceiver, orhome theater system withoptical audio
input.
2HDMIMIN-High-Definition MultimediaInterface
input receives digitalaudioanduncompressed digital
video fromanHDMI deviceoruncompressed digital
video fromaOVI device. Alsoseeitem 4.HDMI
connection
isnecessary toreceive 1080psignals.
3PCIN-Forusewhen connecting apersonal computer.
4PC/HDMI 1(AUDIO)IN-PC audio inputterminal is
shared withHOMI 1analog audioinputterminal, andits
use can beconfigured inthe
Audio Setupmenu
(1&page50).
5ColorStream®HD1andColorStream® HD2-Two
sets
ofColorStream® high-definition componentvideo
inputs (withstandard stereoaudioinputs) forconnecting
devices withcomponent videooutput, suchasaToshiba
OVDplayer withColorStream®.
Note:Component videocables carryonlyvideo
information; separateaudiocables arerequired for
a
complete connection.
TVback
I-------CableStrap
9
6VIDEO1IN-Standard (composite) videoandstandard
audio inputs plusoptional S-videoinputsforconnecting
devices withcomposite videoorS-video output.
Note:Standard (composite) videoandS-videocables
carry onlyvideo information; separateaudiocables are
required for
acomplete connection.
7FixedAudio OUT-Analog audiooutputs for
connecting anaudio amplifier.
8
IROUT -Forcontrolling infraredremote-controlled
devices through theTV. You canconnect uptotwo
devices withanoptical IRblaster cable
(1&page12),and
then control thedevices usingthe
TVsIRpass-through
features.
9 ANT/CABLE -Antennainputthatsupports analog
(NTSC) anddigital (ATSC) off-airantenna signalsand
analog anddigital CableTV(QAM) signals.
HDMI,theHDMIIogoandHigh-Definition MultimediaInterfaceare
trademarks orregistered trademarks ofHDMI Licensing LLC.
Manufactured underlicense fromDolby Laboratories.
Dolby andthedouble-D symbolareregistered trademarks ofDolby
Laboratories.
11I 
						

							Overviewofcabletypes
Cablescanbepurchased frommoststores thatsellaudio/video
devices. Beforepurchasing anycables, besure
ofconnector
types required byyour devices andthelength
ofeach cable.
Coaxial(F-type)cable
G{U)...-----
Coaxial (F-type) cableisused forconnecting yourantenna,
cable TVservice, and/orcableconverter boxtothe
ANTI
CABLE inputonyour TV.
StandardANcables(red/white/yellow)
~~~---+0-----
~
StandardNYcables (composite video)usually comeinsetsof
three,andareforuse with video devices withanalog audioand
composite videooutput. Thesecables (andtherelated inputs
on your TV)aretypically color-coded accordingtouse: yellow
for video, redforstereo rightaudio, andwhite forstereo left
(or mono) audio.
S-videocable
odJ!lIDu-----
S-video cableisforuse with video devices withS-video
output. Separate audiocables arerequired foracomplete
connection.
Note:An S-video cableprovides betterpicture performance
than
acomposite videocable. Ifyou connect anS-video cable,
be sure
todisconnect thestandard (composite) videocableor
thepicture performance willbeunacceptable.
Componentvideocables(red/green/blue)
I~~---­
~:0;;7
Component videocables comeinsetsofthreeandareforuse
with video devices withcomponent videooutput.
(ColorStream®
isToshibas brandofcomponent video.)These
cables aretypically color-coded red,green, andblue. Separate
audio cables arerequired foracomplete connection.
Note:Component videocables provide betterpicture
performance than
astandard(composite) videoorS-video
cable.
I12
IHDMI™cable(withHDMILogoHOm.)
IO~
HDMI(High-Definition MultimediaInterface)cableisforuse
with devices withan
HDMIoutput. AnHDMIcabledelivers
digital audioandvideo inits native format. Thiscable carries
both video andaudio information; therefore,separateaudio
cables arenotrequired foracomplete
HDMIdevice
connection
(wpage16,l7and 19).
Note:HOMI cable provides betterpicture performance thana
standard(composite) videoorS-videocable.
Dual-wandIRblastercable
~"...........j
Dual-wandIRblastercableisforuse with video devices with
IR(infrared) remotecontrol. Thiscable canbeused withthe
TVsIRpass-through feature(wpageIS).
Toobtain IRblaster cable:
Visithttp://ceaccessories.toshiba.com/
Opticalaudiocable
[Q]ct:::t::J::lto----
Optical audiocableisforconnecting receiverswithDolby
Digital orPCM (pulse-code modulation) opticalaudioinputto
the
TVsDIGITAL AUDIOOUTterminal(wpage18).
AnalogRGB(15-pin)computercable
Analog RGB(IS-pin) computer cableisforconnecting aPC to
the
TVsPC INterminal(Wpage 19).
Note:Separate audiocables arerequired foracomplete
connection.
Abouttheconnectionillustrations
You canconnect different typesandbrandsofdevices toyour
TV
inseveral different configurations. Theconnection
illustrations
inthis manual arerepresentativeoftypical device
connections only.Theinput/output terminalsonyour devices
may differ fromthose illustrated herein.Fordetails on
connecting andusing yourspecific devices, refer
toeach
devices ownersmanual. 
						

							ConnectingaVCR(oraVCRwithS-video)andantenna,CableTVor
Camcorder
FromCableTV
orantenna
f.+---dJIIII[D::;- - -~::i9~~2~~1~-__or
Standard
ANcable
StereoVCR1JVIDEOAUDI~
e~ ~~'NCH'~~;@)~~~~~o:"CH'O~T~
fff~f"JTV¥
::>_~~~i~.?!,!?!:__:~tt
,.1\1
l
0Il:
~!AbDO----------------------------------I
TVlowerbackpanel
TVupperbackpanel
Camcorder
VIDEO2inputsonTVrightsidepanel
Ir~'DEaL....cc:::tll1Jp~11@I
p.::(JJoP~~IZAUDIO
-i.Ul-.n-LII-'~~~R
AUDIO VIDEOaUT
~~~
I-t~
Youwillneed:
•coaxial cables
• standard
ANcables
- For better picture performance,ifyourVCRhasS-video,
use anS-video cable(plustheaudio cables) instead
of
thestandard videocable.
- For better picture performance,
ifyourcamcorderhas
S-video, connectanS-video cable(plustheaudio cables)
toVIDEO1ontheTVbackinsteadofthe VIDEO2onthe
TVright sidepanel.
-
Ifyou haveamonoVCR,connectUMaNaontheTVto
your VCRs audiooutterminal usingthewhite audio cable
only
•S-video cable(ifyour VCRorcamcorder hasS-video)
-00not connect bothtypesofvideo cabletoVIDEO1at
thesame timeorthe picture performance willbe
unacceptable.
•standard audiocables (ifyour VCR orcamcorder has
S-video)
Note:When youuseaCable box,youmaynotbeable touse
the remote control
toprogramoraccess certainfeatures onthe
TV.
Toview theantennaorCable signal:
Select theANT/CABLEvideoinputsource onthe TV.*
Toview basicandpremiumCable channels:
TumOFFtheVCR. Select theANT/CABLEvideoinput
source onthe TV. *Tune the
TVtochannel 3or 4(whichever
channel theCable boxoutput isset to). Use theCable box
controls tochange channels.
ToviewtheVCR:
TumON theVCR. Select theVIDEO 1video inputsource on
the TV.*
Toview thecamcordervideo:
Select theVIDEO 2video inputsource onthe TV. *
*Toselect thevideo inputsource, pressINPUT onthe remote control(1&page21).Toprogram theTVremotecontroltooperate other
devices, seeChapter3.
Theunauthorizedrecording,use,distribution,orrevisionoftelevisionprograms,videotapes,DVDs,andothermaterialsisprohibitedundertheCopyrightLawsoftheUnited Statesandothercountries,andmaysubjectyoutocivilandcriminalliability.
13I 
						

							ConnectingaDVDplayerwithColorStream®(componentvideo),aVCR,
andasatellitereceiver
YourTVhastwo setsofColorStream® (componentvideo)inputs.
Fromantenna
StereoVCR$
VDEOAUDJ;~@~~0NCH3!:f,,,mANT@)
~,'_'~~TCH4OUT10TV,
TVupperbackpanel
AUDIOOUT•..oL•....,.........._
•...oL~..-1WI>-.J
AUDIOO~T~Hc::I[JIIj)l::~
~
....---:>+-----1---=-----0---------
loo~
riPri
p

0~COMPONENT VIDEOS-VIDEO VIDEOOUT OUT
Fromsatellitedish
~
DVDplayerwithcomponentvideo
SatellitereceiverwithcomponentvideoTVlowerbackpanel
Youwillneed:
•coaxial cables
• standard
ANcables
- For better picture performance,ifyourVCRhasS-video,
use anS-video cable(plustheaudio cables) instead
of
thestandard videocable.Donotconnect bothtypesof
video cabletoVIDEO 1atthesame timeorthe picture
performance willbeunacceptable.
- Ifyou have
amonoVCR,connectUMONOontheTVto
yourVCRsaudio outterminal usingthewhite audio cable
only.
• standard audiocables
• component videocables
-Youcanconnect thecomponent videocables (plusaudio
cables) fromthe
OVOplayer orsatellite receiver toeither
set
ofColorStream terminalsontheTV(HD1orHD2).The
ColorStreamHD1andHD2terminals canbeusedto
displayProgressive (480p,720p)andInterlaced (480i,
1080i). Please checktheOwners Manual
oftheOVO
playerorsatelliteinordertodetermine thebest output
signal available (1080p
isnotsupported).
- Ifyour
OVOplayerorsatellite receiver doesnothave
component video,connect
astandardANcableto
VIDEO2ontheside panel. IfyourOVOplayer hasHoMI
video,seepage16.
Toview satellite programs usingthecomponent video
connections:
Turn onthe satellite receiver. SelecttheColorStreamHD2
video inputsource onthe TV. *
Toview theVCRorviewandrecordantenna
channels:
TurnONtheVCR. TunetheVCR tothe channel youwant to
watch. SelecttheVIDEO 1video inputsource onthe TV.*
Torecord aTVprogramwhile watching aDVD:
TurnONthe VCR. TunetheVCR tothe channel torecord.
Select the
ColorStreamHD1videoinputsource onthe TV*
to view theDVD.
*Toselect thevideo inputsource, pressINPUTontheremote control(1&page21).Toprogram theTVremotecontroltooperate other
devices, seeChapter3.
The unauthorized recording,use,distribution,orrevisionoftelevisionprograms,videotapes, DVDs,andothermaterialsisprohibitedundertheCopyrightLawsoftheUnited Statesandothercountries, andmay sUbjectyoutocivilandcriminal
liability.
To view antennaorCable channels:
Select theANT/CABLE videoinputsource onthe TV. *
Toview theDVD player:
TurnONtheDVD player. SelecttheColorStreamHD1
video inputsource onthe TV. *
I14 
						

							ConnectingadevicetotheIROUT
infraredterminalusingtheIR
blastercableforIRpass-through
devicecontrol
YoucanusetheTVsIROUTterminal (infrared pass­
through) toremotely operate(through theTV) many infrared
remote-controlled devices(suchasToshiba infraredremote­
controlled VCRsorDVD players) enclosed withinan
entertainment centerorsimilar cabinet. Without the
IROUT
connection, thedevice typically wouldneedtobe visible to
operate itremotely.
Youwillneed:
• dual-wand IRblaster cable(1J@fpage12)
• other audio/video cablesasrequired toconnect thedevice(s)
to the
TV(1J@fpages 13-16)
FrontofIR-controlledDVDplayer(forexample)
Toconnect theIRblastercable:
1Locatetheinfrared sensoronthe frontofyour device.
This sensor ismarked onsome devices.
*
2Align oneoftheIRblaster cables wandsabout1inch
away fromtheinfrared sensoronthe front
ofthe device
and attach itusing double-sided mountingtape.
Ifyou
have asecond device, attachthesecond wandinasimilar
manner. (Seeillustration.)
Note: Ifyou donot haveasecond device,coilthesecond
wand with
arubberbandandleaveitbehind theTV.
3PlugtheIRblaster cables plugintotheTVsIROUT
terminal.
To control thedevice(s):
Point either thedevices remotecontrol orthe TV remote
control (thatyoupreviously programmed tooperate the
device;
IJ@fChapter3)toward thefrontoftheTV and press the
button forthe desired function. Thesignal passes fromthe
remote control through theTV tothe device viathe IRblaster
cable.
FrontofIR-controlledaudiodevice(forexample)
1fIR blaster cablewand
(approx.1 inchfrom device)
*Ifyoucannotlocate thedevicesinfraredsensor:
1Turn OFFthedevice.
2Starting atthe lower leftcomerofthedevice, placethe
end
ofthe devices remotecontrol (withtheinfrared
emitter) soittouches thefront
ofthe device andpress
POWER.(Do notuse theTVsremote control forthis
step.)
3Ifthe device turnson,thepoint atwhich theremote
control touched thedevice
isthe locationofthesensor.
4
Ifthe device doesnottum on,move theremote control
slightly tothe right andpress
POWERagain.
5 Repeat step4until youlocate thedevices infrared
sensor.
Note:
•
Ifyou usethedevices remotecontroltooperate thedevice,
you also willneed touse the
TVsremote controltooperate
the
TV.
•TheIRpass-through featuredoesnotsupport all
IR-control/ed devices;satisfactory performance
maynotbe
attainable withcertain devices.
DDDDDII
IIInfrared
sensor
151 
						

							ConnectinganHDMI™orDVIdevice
totheHDMIinput
OVIdevice
Note:ToensurethattheHOMI orOVI device isreset properly,
itisrecommended thatyou follow theseprocedures:
• When turning onyour electronic components,
turnonthe
TVfirst,andthentheHOMIorOVI device.
• When turning
offyourelectronic components,turnoffthe
HDMIorDVIdevicefirst,andthentheTV.
TVupperbackpanel
H~:'';;l'~2a3a~
Toconnect aDVI device, youwillneed:
oneHDMI-to-DVI adaptercable(HDMI typeAconnector)
per DVI device
-Forproperoperation, thelengthofanHOMI-to-OVI
adapter cableshould notexceed
9.8ft(3m).The
recommended lengthis6.6ft(2m).
one pairofstandard analogaudiocables perDVI device
-An HOMI-to-OVI adaptercabletransfers videoonly.
Separate analogaudiocables arerequired (see
illustration).
- See Setting the
HOMIMaudiomode(lIEpage32).
TVrightsidepanelTVu~pperbackpa~:.lIN~Hom.
1~j2~:.3~:.
••••
ToconnectanHDMI device, youwillneed:
oneHDMI cable(typeAconnector) perHDMI device
-Forproperoperation, itis recommended thatyou usean
HOMI cablewiththeHOMI Logo
(HOm.).
Todisplay an1080p/60Hz signalformat. youwillneeda
Category2cable. Conventional HOMI/OVIcablemaynot
work properly.
HOMI cabletransfers bothvideo
andaudio. Separate
analog audiocables arenotrequired (seeillustration).
See Setting theHOM
IMaudiomode(lIEpage32).
The HDMI inputonyour TVreceives digitalaudioand
uncompressed digitalvideofromanHDMI sourcedevice, or
uncompressed digitalvideofromaDVI (Digital Visual
Interface) sourcedevice.
This input isdesigned toaccept HDCP (High-Bandwidth
Digital-Content Protection)programmaterialindigital form
from EIA/CEA-861-D-compliant[l] consumer electronic
devices (suchasaset-top boxorDVD player withHDMI or
DVIoutput).
The HDMI inputcanaccept anddisplay VGA,SVGA, XGA,
WXGA, SXGA,480i(60Hz), 480p(60Hz),
nop(60Hz),
1080i (60Hz), and1080p (24Hz/60Hz) signalformats. For
detailed signalspecifications, seepage 63.
Supported Audioformat: LinearPCM,sampling rate32/44.1/
48 kHz
Note:ToconnectaPC tothe HOMI input,seepage19.
HOMIdevice[1]EIA/CEA-861-D compliancecoversthetransmission of
uncompressed digitalvideowithhigh-bandwidth digitalcontent
protection, which
isbeingstandardized forreception ofhigh­
definition videosignals. Because thisisanevolvingtechnology.itispossiblethatsome devices maynotoperate properly withtheTV.
Toview theHDMI devicevideo:
SelecttheHDMI1,HDMI2,HDMI 3,or HDMI 4video input
source onthe TV.
*
HDMI, theHDMIIogo andHigh-Definition MultimediaInterfaceare
trademarks orregistered trademarksofHDMI Licensing LLC.
*Toselectthevideo inputsource, pressINPUTontheremote control(1&page21).Toprogram theTVremotecontroltooperate other
devices, seeChapter3.
I16 
						

							REGZA·LINKconnection
Youcancontrol thebasic functionsofconnected audio/video devicesusingtheTVsremote control ifyou connect a
REGZA-LINK compatibleaudioreceiver orplayback device.Foranexplanation
ofsetup andoperations, seepages51and 52.
TVupperbackpanelr----HDMIIN---...,HLlmlTVrightsidepanel
ToconnectanAudio ReceiverandPlaybackDevices,
you
willneed:
• HDMI cables(1&page16)
Note:
•Ifseveral devices areconnected, REGZA-LiNK featuremay
not operate properly.
• For
properoperation. itisrecommended thatyou useHOMI
cables withtheHOMI Logo
(HLlm.).
Playbackdevice
(REGZA-liNKHDDVDplayer,etc.)
Before controlling thedevice(s):
•After completing theabove connections, settheREGZA­
LINKSetupmenu asyou desire(1&page 52).
• The connected devicesmustalsobeset. For details, seethe
operation manualforeach device.
• The REGZA-LINK featureusestheCEC technology as
regulated bythe HDMI standard.
• This feature islimited
tomodels incorporating Toshibas
REGZA-LINK. However,Toshibaisnot liable forthose
operations. Refertothe individual instruction manualsfor
compatibility information.
171 
						

							......-..-.--~--~-----.---_.
~onnectingadigitalaudiosystem
TheTVsDIGITALAUDIOOUTtenninal outputsaDolby®*
Digital
~PAD,D;~YJor2-channel down-mixedpeM(pulse-code
modulation) signalforuse with anexternal Dolby®Digital
decoder
orother external audiosystem withoptical audio
input.
Note:
• Some audiosystems maynotbecompatible withDolby
Digital bitstream signals.Olderaudio systems thatarenot
compatible withstandard opticaloutsignals
maynot work
properly, creating
ahighnoise levelthatmaydamage
speakers orheadphones.
THISDAMAGEISNOT COVERED
BY
YOURWARRANTY.
•TheDIGITAL AUDIOOUTterminalmaynotoutput some
digital audiosources because
ofcopyrestrictions.
Youwillneed:
•optical audiocable(Useanoptical audiocablethathasthe
larger TosLink connectorandnotthesmaller mini­
optical connector.)
*Manufactured underlicense fromDolby Laboratories.
Dolby. andthedouble-D symbolareregistered trademarks ofDolby
Laboratories.
To control theaudio:
o
o
Analogaudioamplifier
o
o
Tocontrol theaudio:
TVupperbackpanel
Youwillneed:
•standard audiocables
Connectinganaudiosystem
Thisconnection allowsyoutouse external speakers withan
external analogaudioamplifier toadjust thesound level.
o
o
DolbyDigitaldecoderor
otherdigitalaudiosystem
o
o
TV...b,,,,,,IatdJltI::l--.J
1Turnonthe TV and thedigital audiodevice.
2PressMOUontheTVsremote control andopen theAudio
menu.
3HighlightAudioSetupandpress@.
4IntheOptical OutputFormatfield,select either
DolbyDigitalorPCM,depending onyour device
(~Selecting theoptical audiooutput fonnat on
page 46).
1TumontheTVand thestereo amplifier.
2Minimize thesound volume fromtheTVsbuilt-in
speakers andcontrol thevolume levelusing the
amplifiers remotecontrol.
AudIOSetupPCAudio NoHDMI1Audio AutoMTSStereo
Language English
~~t!Onn~....~:••••••>DolbyDigital
Dynamic RangeControl
Reset Done
I18 
						

							Connectingapersonalcomputer
(PC)
Witheither thePCINorHOMI connection, youcanwatch
your
computersdisplay ontheTVand hear thesound fromthe
TVsspeakers.
Toconnect aPCtothePCINterminalon the TV:
When connecting aPC tothePCIN terminal onthe TV, usean
analog RGB(IS-pin) computer cableanda
PCaudio cable.
TVupperbackpanel
PCaudio
cable
PCaudio
output
Conversion adapter
(if necessary)
•Touse aPC, setthe monitor outputresolution onthe PC
before connecting itto the TV. ThePCINterminal can
accept anddisplay VGA,SVGA, XGA,WXGA, and
SXGA
signalformats. Fordetailed signalspecifications, seepage
63.
•
Todisplay theoptimum picture,usethePCsetting feature
(~Using thePCsettings feature onpage50).
Note:
•ThePC audio inputterminals ontheTVare shared withthe
HoMI1analog audioinputterminals(1&page50).
• Some PCmodels cannot
beconnectedtothisTV.
•Anadapterisnotneededfor computers withacompatible
mini
o-sub15-pin terminal.
• Depending onthe
oVostitleandthe specificationsofthe
PC onwhich youareplaying theoVo-Video, somescenes
maybeskippedoryoumaynotbeabletopause during
multi-angle scenes.
•Signal namesformini O-sub IS-pinconnector
Signal·..SignalSignal···•Pin~o.namePinNo.namePinNo.name
I R 6 Ground11NC
2 G7Ground12NC
3B8Ground13H-sync
4NC*9NC14V-sync
5NC10Ground15NC
*NC=Notconnected
ToconnectaPCtotheHDMIterminalonthe TV:
When connecting aPC totheHOMIterminal onthe TV, use
an adapter cableandanalog audiocables.
Ifconnecting aPC with anHOMI terminal, useanHOMI cable
(type Aconnector). Separateanalogcablesarenot necessary
(1&page 16).
PCaudio
cable
PCaudio
output
TheHOMI inputcanaccept anddisplay VGA,SVGA, XGA,
WXGA, SXGA,480i(60Hz), 480p(60Hz),
nop(60Hz),
1080i (60Hz), and1080p (24Hz/60Hz) signalformats. For
detailed signalspecifications, seepage 63.
Note:
•Theedgesoftheimagesmaybehidden.
•
Ifreceivinga480i (HoMI), 480p(HoMI), 720p,1080i,or
1080p signalprogram, Nativemodescalesthevideo to
display theentire picture withintheborders
ofthescreen
(i.e. nooverscanning).
19I 
						

							Preparingtheremotecontrol
foruse
Installingtheremotecontrol
batteries
Removethebattery coverfromthebackofthe remote
control.
Install twoAAA sizebatteries, makingsuretomatch
the
+and -signs onthe batteries tothe signs onthe battery
compartment.
Your
TVremote control canoperate yourTVand many other
devices suchascable converter boxes,satellite receivers,
VCRs, DVDplayers, andHTIBs (hometheater inabox), even
if they aredifferent brands.
Ifyouhave aToshiba device:
YourTVremote controlispreprogrammedtooperate most
Toshiba devices
(~page24).
Ifyouhave anon-Toshiba deviceoraToshiba device
that theremote control isnot preprogrammed to
operate:
You canprogram theTV remote control soitwill operate the
other device
(~pages 22-26).
1
2
Squeeze tab
and liftcover.
I20
3Reinsert thebattery coverinthe remote control untilthe
tab snaps.
Caution:Batteries mustnotbeexposedtoexcessive heat
such
assunshine, fireorthelike.
Note:
•Be suretouse AAA sizebatteries.
•Disposeofbatteriesinadesignated disposalarea.
• Batteries shouldalways bedisposed
ofwith the
environment
inmind. Always disposeofbatteriesin
accordance withapplicable lawsandregulations.
•Ifthe remote controldoesnotoperate correctly,orifthe
operating rangebecomes reduced,replacebatteries with
new ones.
•
Whennecessarytoreplace batteriesintheremote control,
always replace bothbatteries withnew ones. Never mix
battery types
orusenewandused batteriesincombination.
• Always remove batteries fromtheremote control
iftheyare
deadoriftheremote controlisnottobeused foran
extended period
oftime.Thiswillprevent batteryacidfrom
leaking intothebattery compartment.