Toshiba LCD Television Ragza Owners Manual

							---_._---_..._-------
Settingthesleeptimer...........::...........................................•.............................................•.................\
...................
Youcansetthe sleep timer totum offtheTV after aset length
oftime (maximumof180minutes).
Tosetthesleeptimerusing theremotecontrol:
PressS~EPonthe remote controltosetthe lengthoftime until
the TV turns off.Repeatedly press
S~EPtoincrease thetime in
10-minute increments, or
pressorTtoincrease ordecrease
the time inlO-minute increments, toamaximum
of180
minutes.
Toset the sleeptimerusing theon-screen menus:
1FromtheSetupmenu, highlightSleepTimerandpress
@.
2Press theNumber buttonstoenterthelengthoftime in
10-minute increments.
3HighlightDoneandpress@.
Note: Whenapower failureoccurs, thesleep timersetting
may
becleared.
UsingREGZA-LINK.......................•..............................................\
.......................
This isanew feature thatuses CEC technology andallows you
to control Toshiba REGZA-LINK compatibledevicesfromthe
TV remote viaHDMI connection
(IrEpage17).
When theEnable REGZA-LINK
intheREGZA-LINK setup
menu
(IrEpage 52) issettoOn,the following REGZA-LINK
functions willbeenabled.
REGZA·LlNKplaybackdevice(HOOVO
player,etc.)control
With yourTVsremote control, orusing theREGZA-L1NK
PlayerControlmenu, youcancontrol theconnected
REGZA-LINK playbackdeviceyouarewatching.
Avail able remote control keyfunctions:
Before usingthefollowing keyfunctions, firstsetthe MODE
SELECT switchonthe remote control toTV .
.Oescrip,til)n::...
Begins playback.
Todisplaytheremainingsleeptime:
PressS~EP.
Note: Amessage willdisplay on-screen whenthereisone
minute remaining onthe sleep timer.
Tocancel thesleeptimer:
Repeatedly pressS~EPuntilitis set to0minute.
STOP00
PAUSE/STEP~
SKIP~SKIP~FF(ffi
REW~
EXITo
Stops playback.
Pauses thepicture duringplayorrecord
mode.
Skips forward.
Skips backward.
Fast-forwards.
Rewinds/reverses. Navigate contentsmenu,etc.
Enters contents menu,etc.
Returns tothe previous menu.
Note:These functions dependonthe devices connected.
(continued)
51I 
						

							3Press..orTtoselect theitem youwant tocontrol and
press
8.
REGZA-LINK PlayerControl menufunctions:
1PressMOUandopen theApplicationsmenu.
2HighlightREGZA-L1NK PlayerControlandpress8.With yourTVsremote control, youcanadjustormute the
sound volume
oftheAudio Receiver. First,setthe MODE
SELECT switchonthe remote control to
TV.
•(.t;)~adjustthevolume level.
•M()Eturnsoffthe sound.
Note:
•Touse thisfunction:
- Set
Speaker PreferencetoAudioReceiverinthe
REGZA-LINK Setupmenu.
- Confirm thataconnected REGZA-LiNK device(suchas
HOOVOplayer, etc)isselected forthe Audio Receiver
input source.
•
Youcan also usethisfunction whentheaudio receiveris
connectedtotheTVsDIGITALAUDIOOUTterminal (not
HOMI connection).
Inthiscase, select adigital audioinput
mode onthe Audio Receiver.
• These functions depend
onthedevice connected.
OtherREGZA·LlNKfunctions
VOLUMEandMUTEcontrolsofAudio
Receiver
Accesses thetop menuofaDVD.
Accesses themenu
ofaDVD.
Turns
theselect device onand off.
Accesses thecontents listwhen youpress
8.Atthis time, theREGZA-LINKPlayer
Control
menu willdisappear.
Menu
Power
Contents
Menu
Top
Menu
Whenthe
Enable REGZA-L1NKandeach iteminthe
REGZA-L1NKSetupmenu aresettoOn,the following
functions willbeenabled.
Note:
•These functions dependonthe devices thatareconnected.
•
TheREGZA-LiNK PlayerControl itemwillbegrayed outin
thefollowing conditions:
- A non-HOMI input
iscurrentlyselected.
-
TheEnable REGZA-LINKitemissettoOff.
-
Theconnected CECdeviceisnotaplaybackorrecording
device.TV Auto
Input Switch
.O.,cription
Ifaconnected HDMIdevicestartsplaying
video oraudio, theTV will automatically
switch tothe appropriate HDMIinput.
REGZA·LlNKinputsourceselection
IfaREGZA-LINK devicewithHDMI switching capability
(e.g. Audio Receiver)
isconnected tothe HDMI input,youcan
select another REGZA-LINK devicethat
isconnectedtothe
master HDMIdeviceusingthe
TVsINPUT button.Seepage
35 for details. TV
Auto Power
Device Auto
Standby
Speaker Preference
Ifa REGZA-LINK deviceisturnedon,the
TV turns onautomatically.
Ifthe TV isturned offtheTV will send a
message toturn offall
ofthe REGZA­
LINK devices connected tothe TV.
From thisitem, youcansetyour audio
output preference tothe TV speakers orthe
audio receiver speakers. Whenthisitem is
set toAudio Receiver, theTV remote can
be used toadjust ormute thevolume
ofthe
audio. Thisitem willbegrayed outunless a
REGZA-LINK compatibleaudioreceiver
is connected.
Note:Whenyou turn onthe Audio Receiver, changeitsinput
source, oradjust thesound volume, thesound will
beoutput
from theaudio receivers speakerseven
ifTVSpeakershas
been selected.
TurntheTVoffandonagaintooutput the
sound fromthe
TVspeakers.
I52 
						

							Toset the REGZA-LINK Setup:
1FromtheSetupmenu, highlightREGZA-L1NK Setup
andpress@.
2Press.A.orTtohighlightEnable REGZA-L1NK.
3Press....or~toselectOn.
Note:Ifyou setEnableREGZA-L1NKtoOff, theother
items will
begrayedout.
4Press.A. orTtohighlight theREGZA-L1NKsetupitem
you want touse, andpress
....or~toselectOnor desired
mode.
• TV Auto Input Switch: On/Off
• TV Auto Power: On/Off
• Oevice AutoStandby: On/Off
• Speaker Preference: TVSpeakers/Audio Receiver
5Tosave thenew settings, highlightDoneandpress@.
Toreverttothe factory defaults, highlightResetand
press@.
UsingtheHOMIsettingsfeature
Thismenu consistsofthefollowing 2items (newHOMI
capabilities) andwill begrayed outonnon-HOMI inputs.
Some HOMI legacysources maynotwork properly withyour
HOMI TV,please trysetting thefollowing options(Lip-Sync
Latency andDeep Color) toOff. Adjusting thesesettings
should allowyourHOMI legacysource tooperate properly
with your TV.
Note:Youmust disconnect yoursource devicefirstbefore
settings can
beadjusted.
•Lip-Sync Latency:On
This option activates anauto audio/video displaytiming
adjustment functionthatallows HOMI sourcedevices
to
accurately performsynchronization automatically.
• Deep Color: On (46 and52 models only)
This feature allowstheHOMI sourcetoincrease available
colors bitswithin theboundaries defined
bytheROB or
YCbCr colorspace.
All above HOMI settings needproper HOMI sourcedevice.
IfHOMIsource products doesnotsupport thesefeatures,
the TV may notwork properly
byactivating thesefeatures.
Note:IfyourHOMI connectioniscapableof1080p and/or
your
TViscapableofrefresh ratesgreater than60Hzor
supports DeepColor, youwillneedaCategory2cable.
Conventional HOMI/OVIcables
maynotwork properly withthis
mode.
To set the HDMI Settings:
1Selecttheappropriate HDMIinputmode (HOM II,
HOMI
2,HOM I3, or HOM I4).
2From theSetupmenu, highlight HDMISettingsand
press@.
3Press.A.orTtohighlighttheitem youwant toset.
4Press....or~toselectOnor Off .
5Tosave thenew settings, highlightDoneandpress@.
Toreverttothe factory defaults, highlightResetand
press@.
53I 
						

							DisplayingTVstatusinformation-.-----.._._._..-.._...__.-Understandingtheautopoweroff
feature
Todisplay TVstatus information usingRECALL:
PressRE~LLonthe remote control.
The following information willdisplay (ifapplicable):
• Current input(ANT/CABLE,
Video1,etc.)
•IfANT/CABLEisthecurrent input,eitherCABLE (for
cable TV)orANT (forover-the-air broadcasts).
Channel number
(ifinANT/CABLEmode)
• Channel label(ifset)
• Digital signalstrength indicator (bargraph inlower right
corner
ofbox; forATSC signalonly)
• Stereo, MonoorSAP audio status (when HDMI inputmode,
Dolby Digital orPCM)
• Video resolution
• Aspect ratio
ofincoming videosignal (4:3or16:9)
• V -Chip rating status
• GameTimer (ifset) The
TVwill automatically turnitself
offafter approximately
15minutesifitistunedtoavacant channel orastation that
completes itsbroadcast forthe day. This feature functions in
ANT/CABLEmodeonly.
Understandingthelastmode
memoryfeature
Ifthepoweriscutoffwhile youareviewing theTV, the
LastMode Memory featureautomaticallyturnsonthe TV
when thepower isresupplied.
Note:Ifits possible,andyou willbeaway fromtheTVforan
extended period
oftimeyoushould unplug thepower cord.
CDSlereo 480,EI:DNone
Toclose theRECALL screen:
PressRE~LLagain.
Todisplay TVstatus information usingINFO:
(onlyavailable forANT/CABLE input)
Press
,()oon the remote control.
The following additional information willdisplay for
offair
digital channels (ifapplicable):
• Title
• Duration
• Detailed description
To display Nextinformation, press
,()oonthe remote control
again. Pressing
I()Oathird timewillremove theentire banner.
·IdI:'tk1ii·"i.~iiNastlvlHeNY.ChannelprO....l(S~s..,(JOIITetle~!o~eandSou1he.,J(ell,,(ky,(ather
Note:Thelocationofthe banner canbemovedtothetopor
bottomofthescreenbypressing ...orT while theRECALL or
INFO display
ison-screen. (Thelastposition willbestoredto
memory.)
I54 
						

							Usingtheadvancedpicturesettings
features
Usingthestaticgammafeature
Thestatic gamma featureallowsyoutoadjust thelevelsof
black inthe picture.
Toselect dynamiccontrastpreferences:
1PressM~Uandopen theVideomenu.
2HighlightPictureSettingsandpress@.
Usingdynamiccontrast
When dynamic contrastisset toLow, Middle,orHigh,the
TV will detect changes
inthepicture quality thataffect the
appearance
ofyour contrast settingsandthen automatically
adjust thevideo.
Toadjustthe staticgammasettings:
1From theVideomenu, highlightPictureSettingsand
press@.
2HighlightAdvancedPictureSettingsandpress@.
3IntheStatic Gammafield,press~or~toadjust the
static gamma.
The adjustment rangeiswithin ±5from center.
•Ifthesetting ismovedinthe minus direction, thedetail
ofblack colors willbedecreased.
•Ifthe setting ismovedinthe plus direction, thedetailof
black colors willbeincreased.
4To save thenew settings, highlightDoneandpress@.
Torevert thefactory defaults, highlightResetand
press@.
Note:Ifyou select oneofthefactory-set picturemodes
(Sports, Standard, Movie,
orPC)andthenchange the
static gamma setting,thepicture modeautomatically
changes
toPreference.
Off.~
Mode
NoiseReduction
ColorMasterm...."~'''''-.~;..•..,,,Game Mode{Th;;;;~"S~;;i~9~~
TheaterLock
t
3HighlightAdvancedPictureSettingsandpress@.
4IntheDynamicContrastfield, select eitherOff,Low,
MiddleorHigh.
STosave thenew settings, highlightDoneandpress@.
Torevert tothe factory defaults, highlightResetand
press@.
Note:Ifyou select oneofthefactory-set picturemodes
(Sports, Standard, Movie,
orPC)andthenchange the
dynamic contrastsetting,thepicture
modeautomatically
changes
toPreference.
(continued)
55I 
						

							Selectingthecolortemperature
Youcanchange thequalityofthe picture byselecting from
three preset colortemperatures (Cool,Medium, andWarm), as
described below.
UsingCableClear®digitalnoisereduction
TheCableClear® digitalnoisereduction featureallowsyouto
reduce visibleinterference inyour TVpicture. Thismaybe
useful whenreceiving abroadcast withaweak signal
(especially aCable channel) orplaying anoisy video cassette
or disc.
To select thecolor temperature:
1From theVideomenu, highlightPicture Settingsand
press@.
2HighlightAdvanced PictureSettingsandpress@.
3HighlightColorTemperatureand press@.
4IntheColorTemperaturefield, select themode you
prefer
(Cool, Medium,orWarm).
5Press£or...toselect eitherBDriveorG Drive,and
then
pressor~to adjust thesettings.
• B Drive:
~makes thepicture blueish.
• G Drive:
~makes thepicture greenish.
Note:TheBDriveandGDrive settings areconnectedto
theColorTemperature settingsandwillchange based
onwhichsettingisselectedinstep4above.
6To save thenew settings, highlightDoneandpress@.
Torevert tothe factory defaults, highlightResetand
press@.
Note:Ifyou select oneofthefactory-set picturemodes
(Sports, Standard, Movie,orPC)
andthen change the
color temperature mode,thepicture modeautomatically
changes
toPreference.
Cool
MediumWarm blueish
neutral
reddishTo change theCableClearsettings:
1From theVideomenu, highlightNoise Reductionand
press@.
2IntheCableClearfield, select yourdesired setting.
Note:
• Ifthe current input
isANT/CABLE, Video1,orVideo2,
the menu willdisplay thetext CableClear The
availableselections areOff, Auto, Low,Middle,and
High.
• Ifthe current input
isColorStreamHD1,ColorStream
HD2,HDMI1, HDMI2, HDMI3,orHDMI4, themenu
will display
thetextDNR.Theavailable selections are
Off, Auto, Low,Middle,
andHigh.Autowillreact
proportionally
tothe strengthofthenoise. Low,Middle,
andHighwillreduce thenoiseinvarying degrees, from
lowest
tohighest, respectively.
3Tosave thenew settings, highlightDoneandpress@.
Torevert tothe factory defaults, highlightResetand
press@.
UsingMPEGnoisereduction
TheMPEG noisereduction featureallowsyoutoreduce
visible interference causedbyMPEG compression. Choices
for MPEG noisereduction are
Off,Low, Middle,andHigh.
Offisautomatically selectedwhenthisfeature isdisabled
(grayed out).
Toselect theMPEGnoisereduction level:
1FromtheVideomenu, highlightNoise Reductionand
press@.
2Press£or... tohighlight theMPEGNoiseReduction
field,andthenpressor~toselect eitherOff,Low,
Middle
orHigh.
3To save thenew settings, highlightDoneandpress@.
Torevert tothe factory defaults, highlightResetand
press@.
I56 
						

							UsingtheColorMaster™feature
TheColorMaster featureallowsyoutoadjuststandard colors.
The menu willconsist
of3items:
ColorMaster, ColorPalette Adjustment, andReset.
Toturn onColorMaster:
1From theVideomenu, highlightColorMasterandpress
@.
2IntheColorMasterfield, selectOn.
Note:Ifyouselect oneofthefactory-set picturemodes
(Sports, Standard, Movie,orPC)andthenchange the
ColorMaster setting,thepicture modeautomatically changes
toPreference.
ToturnoffColorMaster:
SelectOffinStep 2above.
UsingColorPaletteAdjustment
When colorpalette adjustment isselected, thelistofbase
colors willbedisplayed. Youcanselect abase color toadjust.
Note:TouseColor Palette Adjustment, ColorMastermust
besettoOn.
To adjust theBase Colors:
1From theColorMastermenu, highlightColor Palette
Adjustment
and press@.
2TheSelect Standard Colorwindowwillbedisplayed.
Press.ortohighlight thecolor youwant toadjust, and
then press
@.
3TheColor Adjustmentwindow willbedisplayed.
Press
FROZEto freeze thepicture.
To return tomoving picture,press
FROZEagain.
ColorAd\uslmenl
4PressAor...toselecteitherHue,Saturation,or
Brightness,andthen press....and~toadjust thesetting.
Note:Toreverttothe factory settingsoftheHue,
Saturation,
andBrightnessfor the selected color,
Highlight
Resetandpress@.
5PressCHOTNto return tothe previous menu.
6Repeatsteps2through 5to adjust anyother color.
Toreset ColorMaster toits factory settings:
1FromtheColorMastermenu, highlightReset,andthen
press@.
2Aconfirmation messagewillappear. HighlightOK,and
then press
@.
3PressE8.
UsingtheGameModefeature
YoucanusetheGame Modefeature forshorter framedelays
when playing avideo gamerequiring split-second timing
between theon-screen displayandinput fromthecontroller
(such
asmusic creation andhigh-action games).
This feature ismore effective for480i andI080i inputsignals.
Note:TousetheGame Modefeature, thecurrent videoinput
must
beVideo1,Video2,ColorStream H01,
ColorStream H02,HOMI1, HOMI2, HOMI3, HOMI4,
orPc.
TheGame Modecannotbeturned onwhen theANT/CABLE
inputisselected.
Toturn onGame Mode:
1FromtheVideomenu, pressAortohighlight the
GameModefield,press~andAtoselectOn,and
press@.
ToturnoffGameMode:
SelectOffinstep Iabove, change thevideo input, orturn the
TV offand then onagain.
Note:Youcan change thevideo inputbypressingE§onthe
remote control
(~page35).
57I 
						

							Usingtheadvancedaudiosettings
features
Usingthesurroundsoundfeatures
StereoExtension, VoiceEnhancement, andDynamic Bass
Boost helptocreate athrilling surround soundexperience with
deep, richbass from stereo soundsources. Your
TVsaudio
will sound fuller,richer, andwider.
Toadjust thesettings:
1PuttheTV inSTEREO mode(1&Selecting stereo/SAP
broadcasts onpage 45).
2From theAudio menu,highlight Advanced Audio
Settings andpress
@.
3Press~orAtohighlight thefeature youwant toadjust,
and then press
....or~toadjust theitem .
Mode•DescriUon
Stereo
Extension
Voice
Enhancement To
turn thesurround soundeffectOn
or
Off.
Note:1f thebroadcastismonaural, the
Stereo Extension effectwillnot work.
Toturn thevocal emphasis effectOnor
Off.
Dynamic BassToselect thedesired bassexpansion
Boost level(Off,
Low,orHigh).
4To save thenew settings, highlight Doneandpress@.
Torevert tothe factory defaults, highlight Resetand
press@.
I58 
						

							Generaltroubleshooting
Beforecalling aservice technician, pleasecheckthischapter
for apossible cause
oftheproblem andsome solutions youcan
try.
Blackboxon-screen
•TheclosedcaptionfeatureissettooneoftheTextmodes(T1,
T2, T3,orT4).SettheclosedcaptionfeaturetoOff
(I@page43).
TVstopsrespondingtocontrols
•IftheTVstopsrespondingtothecontrolsontheremote
controlorTVcontrolpanelandyoucannotturnofftheTV,
pressandholdthePOWERbuttonontheTVcontrolpanelfor
5ormoresecondstoresettheTV.
Otherproblems
•IfyourTVsproblemisnotaddressedinthisTroubleshooting
sectionortherecommendedsolutionhasnotworked,usethe
RestoreFactoryDefaultsprocedure(I@page34).
TVwillnotturnon
•Makesurethepowercordispluggedin,andthenpressPO{jr,
•Theremotecontrolbatteriesmaybedead.Replacethe
batteriesortrythecontrolpanelbuttons.
Pictureproblems
General pictureproblems
•Checktheantenna/cableconnections(I@Chapter2).
Press~ontheremotecontrolorTVandselectavalidvideo
inputsource(I@page35).Ifnodeviceisconnectedtoa
particularinputontheTV,nopicturewilldisplaywhenyou
selectthatparticularinputsource.Fordeviceconnection
details,seeChapter2.
•Antennareceptionmaybepoor.Useahighlydirectional
outdoorantenna(ifapplicable).
•Thestationmayhavebroadcastdifficulties.Tryanother
channel.
•AdjustthepictureQualities(I@page42).
IfyouareusingaVCR,makesurernAontheremotecontrol
issetcorrectly(I@page21).
•DonotconnectbothastandardvideocableandanS-videocabletotheVIDEO1inputatthesametime
(I@page13).
Noisypicture
•Ifyouarewatchingananalogchannel(off-airbroadcastor
CableTV),youcansettheCableClear®/ONRfeaturetoAUTO
toreducevisibleinterferenceintheTVpicture(I@page56).
Video InputSelection problems
•IftheInputSelectionwindowdoesnotappearwhenyou
press~ontheremotecontrolorTV,press~asecond
time,whichwillchangetothenextvideoinputsourceand
displaytheInputSelectionwindow.
Cannotviewexternal signalsorchannel3or4
•Ifyoucannotviewsignalsfromexternaldevicesconnectedto
VIDEO1,VIDEO2,ColorStream®,HOMI1,HOMI2,HOMI3,
HOMI4,PCorfromchannels3or4,makesuretheInputLock
isset toOff(I@page49).
Poorcolorornocolor
•Thestationmayhavebroadcastdifficulties.Tryanother
channel.
•AdjusttheTintand/orColor(I@page42).
Poor compositeorS-video picture
•IftheTVisconnectedtoanexternalANdevice(e.g.,DVD
player,videogamesystem,set-topbox,etc.)tryusinga
ColorStreamorHOMIvideoconnectioninstead.
•IfyouconnectanS-videocable,besuretodisconnectthe
standard(composite)videocable.Donotconnectbothtypes
ofvideocableatthesametime.
Pictureandsoundareoutofsync
•Aswithallproductsthatcontainadigitaldisplay,inrare
instances,whenviewingcertaincontent(e.g..television
broadcasts,videogames,DVDs),youmaynoticethatthe
soundandpictureareslightlyoutofsync.Thisphenomenon
canbecausedbyvariousfactorsincluding,withoutlimitation,
videoprocessingwithintheTV,videoprocessinginan
attachedgamingsystem,andvideoprocessingordifferent
compressionratesusedbybroadcastersintheir
programming.Youmaywanttotryoneormoreofthe
followingsuggestions,whichmayhelptoreducetheeffectof
thisphenomenon:
-IftheTVisconnectedtoanANreceiverthathasa
programmableaudiodelayfeature,usethisfeaturetohelp
synchronizethesoundtothepicture.
-IfyounoticethisphenomenononlyoncertainTVchannels,
pleasecontactyourlocalbroadcast,cable,orsatellite
providertoinformthemofthisissue.
LEDindicationswhileinrebootfromstandby
•Whenyouplugthepowercordin,theyellowLEDwillblink
untiltheTVentersstandbymode,(pluggedinbutnot
poweredon).Thisisnormalandisnotasignofmalfunction.
Soundproblems
•Checkt~eantenna/cableconnections(I@Chapter2).
•Thestationmayhavebroadcastdifficulties.Tryanother
channel.
•Thesoundmaybemuted.PressVOLUME.
•Ifyouhearnosound,trysettingtheMTSfeatureto
Stereomode(I@page45).
•Ifyouarenotreceivingasecondaudioprogramfromaknown
SAPsource,makesuretheMTSfeatureisset toSAPmode
(I@page45).
•Ifyouhearaudiothatseemsincorrectfortheprogramyou
arewatChing(suchasmusicoraforeignlanguage),theSAP
modemaybeon.SettheMTSfeaturetoStereomode
(I@page45).
(continued)
59I 
						

							Remotecontrolproblems
•Makesuretheremotecontrolissettothecorrectdevice
mode(~page21).
•Removeallobstructionsbetweentheremotecontrolandthe
TV.
•Theremotecontrolbatteriesmaybedead.Replacethe
batteries(~page20).
•YourTVremotecontrolmaynotoperatecertainfeatureson
yourexternaldevice.Refertotheownersmanualforyour
otherdevicetodetermineitsavailablefeatures.IfyourTV
remotecontroldoesnotoperateaspecificfeatureonanother
device,usetheremotecontrolthatcamewiththedevice
(~pages22-26).
•IftheTVstilldoesnotactasexpected,usetheResetFactory
Defaultsprocedure(~page34).
Channeltuningproblems
•Makesuretheremotecontrolissettothecorrectdevice
mode(~page21).
•Thechannelmayhavebeenerasedfromthechannelmemory
bytheChannelAdd/Deletefeature.Addthechanneltothe
channelmemory(~page30).
•ThechannelmaybeblockedbytheChannelsBlockfeature.
Unblockthechannel(~page48).
•Ifyouareunabletotunedigitalchannels,checktheantenna
configuration(~page29).Ifyouarestillunabletotune
digitalchannels,clearallchannelsfromthechannellist
(~page31)andreprogramchannelsintothechannel
memory(~page30).Ifyouarestillunabletotunedigital
channels,usetheResetFactoryDefaultsprocedure
(~page34).AlsoseeTVstopsrespondingtocontrols
andOtherproblems(~page59).
Closedcaptionproblems
•Iftheprogramorvideoyouselectedisnotclosed-captioned,
nocaptionswilldisplay(~page43).
•Iftextisnotavailable,ablackrectanglemayappear.Ifthis
happens,turnofftheclosedcaptionfeature(~page43).
• Aclosed-captionsignalmaynotdisplaycorrectlyinthe
followingsituations:a)whenavideotapehasbeendubbed;b)
whenthesignalreceptionisweak;orc)whenthesignal
receptionisnonstandard(~page43).
Ratingblocking(V-Chip)problems
•IfyouforgetyourPINcode:WhilethePINcodeenteringscreenisdisplayed,pressRE8LLfourtimeswithin5seconds.
ThePINcodeyoupreviouslystoredwillbecleared
(~page46).
•TheV-ChipfeatureisavailablefortheU.S.V-Chipsystemonly
(~page47).
NoREOZA-L1NKoperation
•TheREGZA-L1NKfeatureisavailableforToshibaREGZA-L1NK
compatibledevices.
•MakesuretheHOMIcableswiththeHOMILogo(HOml)
areused.
•WhentheconnectedREGZA-L1NKdevicedoesnotwork
correctlyafteryouhavechangedsettingsofthedevice,turn
offyourTVandunplugthepowercord,thenplugandturnon
again.
•Ifseveraldevicesareconnected,REGZA-L1NKfeaturemay
notoperateproperly.
•Readtheinstructionmanualfurnishedwiththeconnected
REGZA-L1NKdevice.
I60
HOMIproblems
ForHOMI cables
•
MakesuretheHOMIcableswiththeHOMILogo(HOml)
areused(~page16).
For Deep Color
•
YoushouldneedtouseCategory2cabletoworkproperly.NormalHOMIcableorOVIcablemaynotworkwiththisoption(~page53).
For Legacy HOMI source
•
SomeoflegacyHOMIsourcesmaynotworkproperlywithlatestHOMITVproducts,duetonewstandardadoption.PleasetrytosetOfftheHOMIsettings(Lip-SyncLatency,DeepColor).YourlegacyHOMIsourceshouldoperateproperlywiththisTVproducts(~page53).