Toshiba Perception E Ex Digital Pbx Installation And Maintenance Manual

							PERCEPTION,,,, 
LCR/TR PROGRAMMING GUIDE 
MARCH 1991 
ACTALL 
RN001 Local calls are routed according to 
NONE Route Table #l (see AOCNOOl). 
RN002 
312 +---- Metro area calls are routed 
RN003 according to Route Table #2. 
217 309 618 815 ‘----- Calls to Illinois are routed 
RN004 
NONE according to Route Table #3. 
RN005 
NONE 
RN006 
NONE 
RN007 
NONE 
RN008 
NONE 
RN009 
NONE 
RN010 
NONE 
RN011 
NONE 
RN012 
NONE 
RN013 
NONE All calls to these Area Codes are routed 
RN014 according to Route Table 815. 
NONE 
RN015 
200 201 202 203 204 205 206 207 208 209 
210 211 212 213 214 215 216 218 219 300 
301 302 303 304 305 306 307 308 310 311 
313 314 315 316 317 318 319 400 401 402 
403 404 405 406 407 408 409 410 411 412 
413 414 415 416 417 418 419 500 501 502 
503 504 505 506 507 508 509 510 511 512 
513 514 515 516 517 518 519 600 601 602 
603 604 605 606 607 608 609 610 611 612 
613 614 615 616 617 619 700 701 702 703 
704 705 706 707 708 709 710 711 712 713 
714 715 716 717 718 719 800 801 802 803 
804 805 806 807 808 809 810 811 812 813 
814 816 817 818 819 900 901 902 903 904 
905 906 907 908 909 910 911 912 913 914 
915 916 917 918 919 
REQ 
PLCR (ACTALL) Printout 
-17-  
						

							PERCEPTIONeh, 
LCR/TR PROGRAMMING GUIDE 
MARCH 1991 
TN001 
AC 
RN0 
oc 
REQ AOCNOOl 
312 
01 .---- Local calls (Office Codes below) are 
routed according to Route Table 81 
223 232 244 249 258 289 331 333 336 
356 362 367 371 381 382 426 428 433 
458 464 466 479 526 534 540 546 552 
554 556 557 563 584 587 594 623 634 
658 662 669 672 680 683 689 695 697 
741 742 746 830 83-l 840 844 851 859 
879 888 892 896 946 972 
PLCR (AOCNOOl) Printout 
RTOl 
RN001 
RTl 00 01 
RT2 03 01 
RT3 NONE NONE 
RT4 NONE NONE 
RT5 NONE NONE 
RT6 NONE NONE 
SCHA 0000 2400 
LC3 RTl 
LC2 NONE 
LCl RT2 
SCHB 2400 2400 
LC3 NONE 
LC2 NONE 
LCl NONE 
SCHC 2400 0000 
LC3 NONE 
LC2 NONE 
LCl NONE + - - - - Trunk Group 00, Modify Digits Table 0 7. 
+ - - - - Trunk Group 03, Modify Digits Table 0 1. 
l - - - - Schedule A only used in this application. 
+ - - - - Route 2 can only be used by LCR class #l. 
+ - - - - SCHB prompt must be completed. 
REQ  
						

							PEFiCEPTION,h,, 
LCR/TR PROGRAMMING GUIDE 
MARCH 1991 
RT02 
RN002 
RTl 01 01 
RT2 03 01 
RT3 NONE NONE 
RT4 NONE 
NONE 
RT5 NONE NONE 
RT6 NONE NONE 
SCHA 0000 
2400 
LC3 RTl 
LC2 NONE 
LCl RT2 
SCHB 2400 2400 
LC3 NONE 
LC2 NONE 
LCi NONE 
SCHC 2400 
0000 
LC3 NONE 
LC2 NONE 
LCl NONE 
REQ 
Route Table #2 Printout 
PLCR (RT02) 
RT03 
RN003 
RTl 
02 01 
RT2 
04 01 
RT3 00 02 
RT4 
03 02 
RT5 NONE NONE 
RT6 NONE NONE 
SCHA 
LC3 
LC2 
LCl 0800 
RTl 
RT2 RT3 
RT4 1800 +- 
Schedule A = 8 a.m. to 6 p.m. 
SCHB 
LC3 
LC2 
LCl 
SCHC 
LC3 
LC2 
LCl 
REQ 
1800 
0800 +- Schedule B = 6 p.m. to 8 a.m. RTl 
RT3 RT2 
RT4 
0800 0800 
NONE 
NONE 
NONE 
Route Table #3 Printout 
PLCR (RT03) 
-19-  
						

							PERCEPTION,&,, 
LCf?/TR PROGRAMMING GUIDE 
MARCH 1991 
RT15 
RN015 
RTl 00 02 
RT2 04 
01 
RT3 03 
02 
RT4 
NONE 
NONE 
RT5 NONE 
NONE 
RT6 
NONE NONE 
SCHA 0000 
2400 
LC3 
RTl 
LC2 RT2 
LCl RT3 
SCHB 2400 
2400 
LC3 NONE 
LC2 NONE 
LCl NONE 
SCHC 2400 
0000 
LC3 NONE 
LC2 NONE 
LCl NONE 
REQ 
Route Table #I5 Printout 
PLCR (RT15) 
REQ MDT1 
TN001 
DLT 
NONE 
I 
ADD *1 +--------- 
I -second pause. 
REQ MDT2 
TN002 
DLT 
ADD 
REQ ~~~;00000*36543~-~~ 
Modify Digits Table Printout 
PLCR (MDT1 and MDTP) 
NOTE: 
A 1 -second pause is usually required when using 
Loop Start trunks, to allow the CO line enough 
time to attach a receiving register. This is usually 
not required for Ground Start trunks. 
COD 
OK 
REQ PAR 
HAC 
ICC 
SPCCl 
SPCC2 
DDP 
AUTHl 
AUTH2 
REQ PTOL 
312 
Y I .---r- 
These parameters are the same as in DLCl/PAR. 
I 
730~0000 
NONE I c These parameters are the same as in DMDR. 
1 c- J 
05 
4---- Absorbs the 5-digit authorization code, and 
prevents it from being printed (SMDR). 
t 1 
NONE 
PTOL (PAR) Printout 
-2o-  
						

							PERCEPTION,B,, 
LCR/TR PROGRAMMING GUIDE 
MARCH 1991 
TYPE 
CNO 
OPR 
INT 
LDA 
ACT 
ACD 
OCT 
OCD 
TYPE 
SAV 
REQ 
> 
COD 
OK 
REQ 
ARC A 
OFC A 
REQ CHG 
CLS 
0 
N *------- 
Operator calls not allowed. 
1 
N *------- 
International calls not allowed. 
r 
N f------- 
555 calls not allowed. 
D 
D 
N 
PTOL 
CLSCNO 
NONE +---------I No Area Codes allowed. 1 
NONE 4--------- No Office Codes (local) allowed. 
(Internal calls only) 
DTDL (CLS) - PTDL (CLSCNO) Restriction Class #O Printout 
NOTE: 
Stations can be programmed for internal calls only 
by denying LC3 and DTA in the Class of Service Data 
Block (DCOS). However, this will not deny 
Operator/International/555 calls. To specifically 
allow/deny these calls, use the DTOL Data Block. 
-21-  
						

							PERCEPTION,h,, 
LCR/TR PROGRAMMING GUIDE 
MARCH 1991 
> 
COD 
OK 
REQ TYPE 
CNO 
OPR 
INT 
LDA 
ACT 
ACD 
OCT 
OCD 
TYPE 
SAV 
> 
COD 
OK 
REQ CLSCNl  DTOL 
CHG 
CLS 
A 
N Ji 
PTOL 
ARC A 
NONE 
OFC A 
TN0 
ARC 
CNO 
OFC 2009 
2909 
3809 
4709 
5609 
6509 
1409 
8309 
9209 
02 
714 
1 
7300 
REQ 2109 2209 
2309 2409 2509 2609 2709 
3009 
3109 3209 3309 3409 3509 3609 
3909 
4009 4109 4209 4309 4409 4509 
4809 4909 5009 5109 5209 5309 5409 
5709 5809 5909 6009 6109 6209 6309 
6609 6709 6809 6909 7009 7109 7209 
7509 7609 7709 7809 7909 8009 8109 
8409 8509 8609 8709 8809 8909 9009 
9309 9409 
9509 9609 9709 9809 9909 2809 
3709 
4609 
5509 
6409 
7309 
8209 
9109 
DTDL (CLS) - PTOL (CLSCNl) Restriction Class #1 Printout 
c 
-22-  
						

							PERCEPTION,&,, 
LCR/TR PROGRAMMING GUIDE 
MARCH 1991 
CNO 
OPR 
INT 
LDA 
ACT 
ACD 
OCT 
OCD 
TYPE 
SAV 
> 
COD 
OK 
REQ CLSCN2 
ARC A 
OFC A 
TN0 
ARC 
CNO 
OFC A 
N 
PTOL 
217 
815 
2009 
2909 
3809 
4709 
5609 
6509 
7409 
8309 
9209 
01 
714 
L 
7300 (See Note) 
219 309 312 317 414 608 618 715 812 
2109 2209 2309 2409 2509 2609 2709 
3009 3109 3209 3309 3409 3509 
3609 
3909 4009 4109 4209 4309 4409 4509 
4809 4909 5009 5109 5209 5309 5409 
5709 5809 5909 6009 6109 6209 6309 
6609 6709 6809 6909 7009 7109 7209 
7509 7609 7709 7809 7909 8009 8109 
8409 8509 8609 8709 8809 8909 9009 
9309 9409 9509 9609 9709 9809 9909 2809 
3709 
4609 
5509 
6409 
7309 
8209 
9109 
REQ Allows all calls to Illinois, Wisconsin, and 
Indiana, including local and metro calls. No 
other calls allowed, except (714) 730-XxXx. 
DTDL (CLS) - PTOL (CLSCN2) Restriction Class #2 Printout 
Note: 
The add/delete list is not shown here. Instead, the result of the 
programming is shown by using the 
PTOL Program. 
-23-  
						

							PERCEPTION,&, 
LCR/lR PROGRAMMING GUIDE 
MARCH 1991 
COD 
OK DTOL 
REQ CHG 
TYPE 
CNO 
OPR 
INT 
LDA 
ACT 
ACD 
OCT 
OCD CLS 
3 
Y 
Y 
Y 
A 
A 
TYPE 
SAV N 
> 
COD 
OK PTOL 
REQ CLSCN3 
ARC A 
OFC A 
REQ 200 201 202 203 204 205 206 207 208 209 
210 211 212 213 214 215 216 217 218 219 
300 301 302 303 304 305 306 307 308 309 
310 311 312 313 314 315 316 317 318 319 
400 401 402 403 404 405 406 407 408 409 
410 411 412 413 414 
415 416 417 418 419 
500 501 502 503 504 505 506 507 508 509 
510 511 512 513 514 515 516 517 518 519 
600 601 602 603 604 605 606 607 608 609 
610 611 612 613 614 615 616 617 618 619 
7.0 0 701 702 703 704 705 706 707 708 709 
710 711 712 713 714 715 716 717 718 719 
800 801 802 803 804 805 806 807 808 809 
810 811 812 813 814 815 816 817 818 819 
900 901 902 903 904 905 906 907 
908 909 
910 911 912 913 914 915 916 917 918 919 
2009 
2909 
3809 
4709 
5609 
6509 
7409 
8309 
9209 2109 
3009 
3909 
4809 
5709 
6609 
7509 
8409 
9309 2209 
3109 
4009 
4909 
5809 
6709 
7609 
8509 
9409 2309 2409 2509 2609 2709 2809 
3209 3309 3409 3509 3609 3709 
4109 4209 4309 4409 4509 4609 
5009 5109 5209 5309 5409 5509 
5909 6009 6109 6209 6309 6409 
6809 6909 7009 7109 
7209 7309 
7709 7809 7909 8009 8109 8209 
8609 8709 8809 8909 9009 9109 
9509 9609 9709 9809 9909 
There are no restrictions-treated as if 
TOL = NONE. c 
OTOL (,CLS) - PTOL (CLSCNS) Restriction Class #3 Printout 
-24-  
						

							LCR/TR PROGRAMMING GUIDE 
MARCH 1991 
7. LOGIC 7.02 All of the LCR/TR logic, and the sequence in 
which the logic is processed by the CPU, are 
7.00 General summarized in the Detailed Logic Flowchart. Use 
this flowchart to answer questions about how the 
7.01 The purpose of the General Logic Flowchart system will act when programmed in a certain way. 
(which begins below) is to show the general flow for The flowchart may also be used as a fault finding aid 
a typical LCR phone call, but without the details. for customer data. 
GENERAL LOGIC FLOWCHART 
Station user dials 
Start here for 
To// Restriction. 
NOTE: 
See To// Restriction 
classificafion table 
(DTOUCLS). 
See area/office 
code exception 
table (if programmed) 
for this area code NO 
office code an  
						

							PERCEPTION,h,, 
LCR/TR PROGRAMMING GUIDE 
MARCH 1991 
GENERAL LOGIC FLOWCHART (continued) 
NOTE: 
See DLCVAOC - - - 
tables TN01 - 16. 
See route table 
number selected - 
See modify digits 
table number _ 
indicated by the RTB. The route table 
selects an idle trunk 
--- 
according to time of 
day and station LCR 
Digits are deleted 
and/or added to 
--- 
dialed number.  From 
NOTE: 
Least Cost Routing 
- - - - - LCR access code 
was dialed. 
Y I 
I YES 
Select the route 
table number 
(RN0 XX) from 
the appro riate 
AOC ta I! le. 
Number is dialed 
and call progress 
tones are heard. 
i 
A END 
1 
\. 
. . 
-26-