Toshiba Strata Se, Strata Vie General Description Manual

FCC REGISTRATION 
The STRATA Se/Vie electronic key telephone 
systems are registered in accordance with the 
provisions of Part 68 of the Federal Communi- 
cations Commission’s Rules and Regulations. 
FCC REQUIREMENTS 
Means of Connection 
The Federal Communications Commission 
(FCC) has established rules which permit the 
STRATA Se/Vie electronic key telephone sys- 
tems to be connected directly to the telephone 
network. A locally provided jack is used for this 
connection-jacks for this type of...

TOSHIBA SYSTEM PRACTICES PROGRAMMING PROCEDURES 
ELECTRONIC KEY TELEPHONE SYSTEM SECTION 500-036-300 
JANUARY 1988 
Strata Se/V/e 
PROGRAMMING PROCEDURES 
TABLE of CONTENTS 
PARAGRAPH 
SUBJECT PAGE 
TABLE of CONTENTS i 
ILLUSTRATION LIST .::::::::::::::::::::::::::::::::::::::::::::::::::::::: i 
TABLE LIST ................................................................ ii 
01 INTRODUCTION ............................................................ 1 
01 .oo General...

PROGRAMMING PROCEDURES 
TOSHIBA SYSTEM PRACTICES 
SECTION 500-036-300 
ELECTRONIC KEY TELEPHONE SYSTEM 
JANUARY 1988 
Strata Se/V/e 
PROGRAMMING PROCEDURES 
I 
TABLE LIST 
NUMBER TITLE PAGE 
1 Hold Recall Time Code ..................................................... 15 
2 Initialized Data ............................................................. 20 
3 System Data Printout Selections Codes 
...................................... 25 
4 Speed Dial Memory Printout Selection Codes...

TOSHIBA SYSTEM PRACTICES PROGRAMMING PROCEDURES 
ELECTRONIC KEY TELEPHONE SYSTEM SECTION 500-036-300 
JANUARY 1988 
Strata Se/We 
PROGRAMMING PROCEDURES 
TABLE LIST 
NUMBER TITLE PAGE 
47 Program 1 #SXY-Modified Digits Table ......................... .:. .......... 73 
48 Program 2#XY-LCR Area/Code Exception Table ............................ 74 
49 Program 3XX-Station CO Line Access ..................................... 75 
50 Program 3#XX-HOXB, HMDB and HIOB Module Enable .................... 76 
51...

01 INTRODUCTION 
01 .oo General 
01 .Ol Data governing overall system opera- 
tton and feature execution for both systems are 
stored in read-only memory (ROM) and cannot 
be altered in the field. However, the data control- 
ling operation of the various options, both sys- 
tem and station, are stored in random-access 
memory (RAM) and can easily be changed ac- 
cording to individual installation requirements. 
01.02 All options are controlled by selections 
made in the system data tables. An...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
02.06 Gnce the desired data is entered and 
displayed. it is written into memory by depress- 
ing the m key on station 13117. 
l System and CO line options are written into 
temporary storage when the m key is de- 
pressed. After all changes in these catego- 
rtes have been made, transfer the data into 
working memory per Paragraph 02.06. 
@ Station option data (with the exception of CO 
line access assignments) 
are written into the 
main data...

32.23 As shown in Figure 1, when in the pro- 
gramming mode, the key/LEDs represent 00 - 
09 when the handset is on-hook and 10 - 19 
when it’s off-hook. It is possible to switch back 
and forth an unlimited number of times without 
disturbing the data. 
NOTE. 
This procedure is for programming purposes 
only! For normal operation, the station 13/ 
17 EKT is set per 
Program 4XX. 
03 PREPARATION 
03.00 General 
03.01 Before system data can be program- 
med, option selections must be made and then...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
5Xx 
5#XX: 
6XX: 
6#XX: 
7XX: 
81XX - 
83Xx: 
84XX - 
86Xx 
87XX - 
89Xx: 
9#xx: 
‘X# 
‘xx 
#lXX’YY Station Class of Service #l 
Station Class of Service #2 
Station Toll Restriction/LCR Classifi- 
cation 
Station-to-Station Hunting 
Station Outgoing Call Restriction 
CO Ringing Assignments-DAY 
CO Ringing Assignments-DAY 2 
CO Ringing Assignments-NIGHT 
Door Phone Ringing Assignments 
Flexible Access Code Numbering 
Flexible Intercom Numbering...