Toshiba Strata Se, Strata Vie General Description Manual

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 19 
PROGRAM 0#8 
NIGHT RINGING OVER EXTERNAL PAGE 
(STRATA Vie only) 
1) Lock in the SET switch on the HKSU. SET LED on. 
Station 17 LED 19 on. 
3 
System is in program mode. 
2) Depress the m key on station 17. 
3) Dial iag on the dial pad. Normal functions halt on station 17. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 20 
PROGRAM 09 
S INGLE CO LINE (DIAL 9) GROUP SELECTION 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. , 
2) Depress the m key on station 13/l 7. 
3) Dial 13 on the dial pad. Normal functions halt on station 13/l 7. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present,data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should...

co L PROGRAMMING PiOCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 21 
PROGRAM 09X 
.INE GROUPS (DIAL 91 - 98) ASSIGNMENTS 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. ’ 
Normal functions halt on station 13/l 7. 
2) Depress the B key on station 13/l 7. SPKR LED steady on. 
3) Dial 5]sfl on the dial pad. (X = 1 - 8 depending SPKR LED flashes continuously. 
upon the group being defined.) Dial IJfl for CO LEDs indicate present data. 
“Dial...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 22 
PROGRAM 0#9 
OFF-PREMISES LINE HUNTING 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. 
2) Depress the Lm key on station 13/l 7. 
3) Dial a$ a on the dial pad. Station 13/17 LED 19 on. 
System is in program mode. 
Normal functions halt on station 13/17. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should 
Using...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 23 
PROGRAM 190 
PBX BACKUP 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
’  System is in program mode. 
2) Depress the m key on station 13/l 7. 
3) Dial 031 on the dial pad. Normal functions halt on station 13/l 7. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. 
An X on the record sheet means the LED should 
Using the appropriate...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 24 
PROGRAM 19X 
PBX ACCESS CODES 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. .’ 
Normal functions halt on station 13117. 
2) Depress the m key on station 13/l 7. 
SPKR LED steady on. 
3) Dial 13 cf on the dial pad. X = 1 - 8 (corre- 
SPKR LED flashes continuously. 
sponding to the access code being program- 
Various LEDs’indicate present data. 
med). Dial iafl(X = 1) to...

TABLE 25 
PROGRAM 100 
TOLL RESTRICTION SYSTEM PARAMETERS 
(DIALING PLAN) 
I SET LED on. 
1) Lock in the 
SET switch on the HKSU. 
2) Depress the m key on station 13/l 7. Station 13/l 7 LED 19 on. 
System is in program mode. 
Normal functions halt on station 13117. 
SPKR LED steady on. 
3) Dial i]a 1 on the dial pad. SPKR LED flashes continuously. 
An LED indicates present data. 
4) Refer to the System Record Sheet. 
Turn the associated LED on for the dialing 
plan of the home Area Code. An X on the...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 26 
PROGRAM 101 
TOLL RESTRICTION DISABLE 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. , 
2) Depress the m key on station 13/l 7. 
3) Dial a 1 fl on the dial pad. Normal functions halt on station 13/17. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. 
An X on the record sheet means the LED should 
Using...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 27 
PROGRAM 102 
FORCED ACCOUNT CODE CHECK 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13117 LED 19 on. 
System is in program mode. 
2) Depress the m key on station 13/l 7. 
3) Dial llg on the dial pad. Normal functions halt on station 13/l 7. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should 
Using the...

PROGRAIWWNG PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 28 
PROGRAM 103/105 
OTHER COMMON CARRIER or EQUAL ACCESS #l and #2 
1) Lock in the SET switch on the HKSU. 
LEDs as shown below. 
5-digit numbers are entered via the di 
X = LED on 
All LEDs off = no data 
5) Depress the m key to place new data in 
. . . or . . . 
NOTE. 
Program 105 follows the same procedure as Program 103. 
Program 105 is used to register the second OCC number used by the system. 
-!i4-