Anaheim HMIPLC Release note for Version 16 all20110601 Users Guide

							
 
Specific attribute is as following table. 
Not tick   The X,Y positions of dynamic graph are constant.   The Upper-left 
Corner of Variable 
Tick The X,Y positions of dynamic  graph are variable.X position = 
the first address,Y position = second address 
Not tick   The width/height of  dynamic graph are constant.   The Widthe/Height 
of Variable 
Tick  The width/height of dynamic gr aph are variable. Width = first 
address, Height = second address. 
 
For example: 
1.Dynamic circle graph,set the  address of the upper-left corner  of variable as LW0,and set 
the address of the width/height  of variable as LW2.Set 
LW0=0,LW1=0,LW2=100,LW4=100. 
The effect is as following figure:  
						

							
 
2. Dynamic circle graph,set the address of the upper-left corner of variable as LW0,and 
set the address of the width/height of variable as LW2.Set 
LW0=50,LW1=80,LW2=200,LW4=100. 
The effect is as following figure:  
						

							
 
9. Event Bar 
Event Bar component is used to rolling display th e current trigger event information. 
1.Event Info Scrollbar Component Attribute  
						

							
 
Display Type Range: Only display the event information of type among this range. 
Moving Step: Every moving step for displaying the ev ent information. Unit is pixel. 
Moving Rate: The interval time between two mo ving steps.    Unit is 100ms. 
【Format】The content is as following table. 
Format for event information display,all the format information will display befor e the event information. 
Event Trig Time The time when event is triggered. 
Extended Time Format(D/H:M) Time format is Day/Hour:Minute 
Short Time Format(H:M) Time format is Hour:Minute 
Standard Time Format(H:M:S) Time  format is Hour:Minute:Second 
Precise Time Format(H:M:S:MS) Time  format is Hour:Mi nute:Second:Millisecond 
Extended Date Format(Y/M/D) Date format is Year/Month/Day 
Event Trig Date(M/D) Date format is Month/Day 
Time Ascending Order Display Tick indicates the latest event  information display at the back. 
Not tick indicates the latest event  information display in the front. 
 
 
1.Event Bar doesn’t support the such formats as “Sequence 
No.”,”Acknowledge Time”,”Return to  Normal Time” and “Only show the 
Event which doesn’t recover” option.   
2.Once the triggered event recover,t he event bar won’t display this event. 
  
						

							
New Function 
1. Find/Replace   
Find/Replace 
Click menu “Edit”->”Find/Replace” or click the icon ,then it will popup following 
dialogue box. 
 
 
Find Range  
Indicates the contents needed to find in EV5000, it can be separated into four kinds as 
following 
Description for Find Range 
Current 
Project Find all the HMI frames,mac ros,background databases. Find 
Range 
Background 
Database Find background database such as event information 
logon,alarm information logon,trend curve and so on.  
						

							
Frames 
and 
Macros Find all the frames and macros in current 
project. 
All FramesFind all the frames in current project. 
All HMI 
All MacrosFind all the macros in current project. 
Frames 
and 
Macros Find all the frames and macros in current HMI. 
All FramesFind all the frames in current HMI. 
Current 
Frame Find the current frame in current HMI. 
Current 
HMI 
Macros Find all the macros in current HMI. 
 
Find  
Description for Find Types   
Register 
Type Indicate the register type which need to find such as bit 
address or word address. Register 
Addr.Type Indicate the address type and address in the controller which 
we need to find.Tick “Range” indicate to find in the setting 
address range. 
Not tick “Match Case” and “Full Match”  indicates that don’t match the letters 
case and full-text consistent. 
Match Case Indicate the text which  need to find must match the letters 
case. 
Text 
Full Match Indicate the text which  need to find must match full-text 
consistent. 
 
Replace  
Set address type and address to replace the address type and address which conform 
to the find condition.   
When user tick “Range” in Find,then the “A utomigration by Cor. Address” will 
activate.If don’t tick “Automigration by Cor.  Address”,then the address for replace is the 
same.If tick “Automigration by  Cor. Address”,then the address  for replace is consider the 
address in “Replace” as initial address and then automatic migration. 
After setting the parameters above,click the “Find” button, then it will search the 
address in the range which conform to the find c ondition.If the address is found,then it will 
display its No.,Location,Name and Data in t he white box in the bottom.If we double click 
it,then the frame will jump to the location  of the component by automatic and popup its 
attribute window. 
Click “Replace” or “Replace All”,then it  will replace all the address type and address.  
						

							
2. Windows Preview 
Click Windows Preview  in Project Structure Window ，it will display the preview of 
the frames as following. 
 
3. FTP Function 
EV5000 has opened FTP function,the  users can copy the data files from SD card or U 
disk to PC,or from PC to SD  card or U disk by LAN.   
 
FTP function is only suitable for the HMI which support Ethernet port and 
USB HOST or SD card.   
 
FTP Function Setting. 
1．Enter the HMI option in HMI attribute,then tick  Open FTP Passwords and set 
password. 
 1 ．Default password ：888888 
2．Password only support number,don’t support characters. 
   If the password is empty,it w ill mention “FTP password can not be 
empty”. 
2 ．Set IP address of HMI,the top three secti on of the IP address must be the same as 
LAN,the last section must be different from PC. 
3 ．The subnet mark must be the same as LAN.Generally users needn’t modify this 
parameters.  
For example,we visit the datas in SD card through LAN.   
1 ．Set the IP address of HMI as 192. 168.100.241,Subnet Mark and Gateway as 
default.Password is 123456.  
						

							
 
2．Save project and compile,then download to HMI. 
3 ． Use Ethernet cable to connect to  LAN,then open explorer.Input the 
IP:
ftp://192.168.100.241 and press Enter,then it will popup following window.Input 
the user name and password,then it  will login the FTP server.   
 User name is root .  
						

							
 
 
 
4．Open the folder “sd”,then we can visit the SD card in HMI.  
						

							
 
4. Run the project in U disk or SD card directly 
When users make lots of pictures in the project, then it will cause that the project is too 
large to download into HMI. At this time, user s can download the project    to U disk or SD 
card.  
 
1. This function is only suitable for t he HMI which support USB HOST or SD 
card. 
2. The project can’t run if it  is copied to U disk directly. 
3. The U disk can’t be pulled  up when the project is running. 
Tick Download to USB1 or USB2 or SD  when downloading the project as following 
figure: