Anthem Ltx 300 Lcos Projector Instructions

							  
ENGLISH
31
Getting StartedPreparationBasic Operation Troubleshooting
Settings Others
Picture Adjust > Gamma
07 Gamma
Sets the gradation characteristics of the projected image.
Normal For normal circumstances, select this
setting.
Gamma adjustment cannot be performed, 
and only copy is valid.
A
Set gamma to 
lA
z.
B Set gamma to 
lB
z.
C Set gamma to 
lC
z.
Custom 1
Custom 2
Custom 3
(Gamma Setup) Three different kinds of gamma can be set according to your preferences.
Correction  Value The coeffi
 cient (1.8 to 2.6) of the gamma curve can be selected.
Gamma 
Adjustment* The gamma curve for the colors (Red, Green, Blue) can be adjusted 
separately.
Adjusting 
lWhite
z will adjust for all 
lRed, Green, Blue
z values. The 
gamma curve displays the value for Green.
Copy Copy the adjusted gamma data.
Paste Paste the copied gamma data.
Reset  Return the gamma coefficients to the values 2.2 set by 
lCorrection 
Value z.
● lNormal
z is suitable for normal circumstances but other settings can be selected\
 according to your preferences.
● This setting can also be con fi gured from the remote control. (P16)
 * lGamma Adjustmentz 
   
① Select the reference gamma curve coef fi cient (1.8  ～ 2.6) in lCorrection Value z.
   
② Select the color to be adjusted in the gamma adjustment screen.
   
③ Adjust the gamma curve in the gamma curve adjustment screen.
   
④ To end
● If gamma curve is adjusted repeatedly, calculation errors will be accumulated and the gamma curve may not be \
able to 
      revert back to its original form. In that case, select “Reset”.
 1023
512
50100(%)
ExitMENU
BACKBack
Select Operate
A 
B
C
0
2.2
Gamma
Correction ValueWhite
Red
Green Blue
Copy
Paste
Reset
Normal
Costom1
Costom2
Costom3
Picture Adjust
 1023
512
50100(%)
ExitMENU
BACKBack
Back
Select Operate
A 
B
C
0
2.2
Gamma
Correction ValueWhite
Red
Green Blue
Copy
Paste
Reset
Normal
Costom1
Costom2
Costom3
Picture Adjust
Input:   10%
Output:100
 1023
512
50100(%)
ExitMENU
BACKBack
Back
Select Operate
A 
B
C
0
2.2
Gamma
Correction ValueWhite
Red
Green Blue
Copy
Paste
Reset
Normal
Costom1
Costom2
Costom3
Picture Adjust
Input:   50%
Output: 580
Select the point where the gradation (brightness) 
is to be adjusted with the 
 /  buttons. Adjust the gradation (brightness) with 
the  /  buttons.
BACKBACKOK
Ye s
No
 Save gamma data? 
						

							4Settings
32
Setting Menu (Continued)
Picture Adjust 
08 Advanced
Adjusts the contours of the image and detailed composition of the image.\
Sharpness Sharpness
(Soft) 0
 to
 100 (Sharp) Adjusts the outline of image.
Detail 
Enhancement (Soft) –50
 to
 50 (Strong) Emphasizes the details of image.
NR* RNR
(Soft) 0
 to
 16 (Strong) Adjusts the intensity of removing 
image noise.
MNR (Soft) 0
 to
 16 (Strong) Adjusts the intensity of removing 
mosquito noise.
BNR On
Reduces block noise.
Off Input signal remains unchanged.
CTI* Off
Input signal remains unchanged.
Low Reduces color smear.
Middle
High
09 Lens Aperture
Lens Aperture 1
Dark
2 Medium
3 Bright
10 Reset
Reset the setting.
* In case of HD signals or PC signals, NR and CTI cannot be set.
● Abbreviations
    NR: Noise Reduction
    RNR: Random Noise Reduction
    MNR: Mosquito Noise Reduction
    BNR: Block Noise Reduction
    CTI: Color Transient Improvement 
						

							  
ENGLISH
33
Getting StartedPreparationBasic Operation Troubleshooting
Settings Others
Input Signal > HDMI
11 HDMI
Confi
 gures HDMI input signal.
Input Auto
Automatically confi gures the input signals.
Standard Select this when the dynamic range of the input images is 
16-235.
Enhanced Select this when the dynamic range of the input images is 
0-255.
Color Space Auto
Automatically confi gures the input signals.
YCbCr(4:4:4) Select this when the Y Cb Cr(4:4:4) video signals are 
input.
YCbCr(4:2:2) Select this when the Y Cb Cr(4:2:2) video signals are 
input.
RGB Select this when the RGB video signals are input.
Control with HDMI On
Enables CEC communications.
Off Disables CEC communications.
 ● The setting is available only if the HDMI terminal is selected.
 ● Abbreviation
     CEC: Consumer Electronics Control
Input Signal > COMP.
12  COMP.
Confi
 gures the input signal for the component video input terminals.
Color Space Y Pb/Cb Pr/Cr
Select this when the component video signals are input.
RGB Select this when the RGB video signals are input.
SCART Select this when RGB video signals and sync signals are 
input via the SCART interface for European markets.
 
● The setting is available only if the component video terminals are selec\
ted.
 
Input Signal > Video/S-Video
13
 Video/S-Video
Confi  gures the Video/S-Video input signals.
NTSC Setup Level 0IRE
Adjusts the gradation for signals without the 7.5 IRE setup.
7.5IRE Adjusts the gradation for signals with the 7.5 IRE setup.
● Adjust this only when NTSC signals are input via Video or S-Video terminal.
Color System Auto
Confi gures the color system automatically.
NTSC Select this when the color system is NTSC.
NTSC4.43 Select this when the color system is NTSC4.43.
PA L Select this when the color system is PAL.
PAL-M Select this when the color system is PAL-M.
PAL-N Select this when the color system is PAL-N.
SECAM Select this when the color system is SECAM.
 ● The setting is available  only when the Video or S-Video input image is projected. 
						

							4Settings
34
Setting Menu (Continued)
Input Signal > Aspect (Video)
14 
Aspect (Video)
Confi
 gures the screen size of the projected image.
4:3 Sets the screen size of the projected image as 4:3.
16:9 Sets the screen size of the projected image as 16:9.
Zoom Zooms the images. (This item cannot be selected in the case of HD signa\
ls.)
● This setting can also be confi gured from the remote control. (P16)
● The items cannot be set in the case of PC signals.
Input Signal > Aspect (Computer)
15
 Aspect (Computer)
Confi  gures the screen size of the projected image.
Auto Enlarges the PC signal horizontally/vertically until it 
fi ts the panel height, and displays 
it in the original aspect ratio.
1:1 Displays the PC signal corresponding to the panel at one dot per pixel r\
atio. The PC 
screen can be shown in the original size.
Full Enlarges the PC signal horizontally/vertically.
● This setting can also be confi gured from the remote control. (P16)
● This setting cannot be set in the case of SD or HD signals.
Input Signal > V-Stretch (when HD or SD video signals are input)
16
 V-Stretch
When set to 
lOn
z, the projected 2.35:1 image will be stretched vertically to the panel r\
esolution.
On The projected 2.35:1 image will be stretched vertically to the panel res\
olution.
Off Projects the 2.35:1 image as-is. (Black bands will be displayed on the \
top and bottom.)
● This setting cannot be set in the case of PC signals.
Input Signal > Picture Position
17
 Picture Position
Adjusts the horizontal/vertical position of the projected image.
●
 The position of the image varies depending on the input signals. The image of some signals may not be fully displayed. Adjust the position 
of image using this menu to display the image properly.
l Off
zl On
z 
						

							  
ENGLISH
35
Getting StartedPreparationBasic Operation Troubleshooting
Settings Others
Input Signal > Over Scan
18 
Over Scan
Selects whether or not to set over scan for the SD video signal.
On Over scan the top, left, bottom and right at 2.5% each.
Off Do not over scan.
●
 This setting is not available when HD signal or PC signal is input.
Input Signal > Mask
19  Mask
Masks (Hides) the outer area of the projected image.
2.5% Mask 2.5% of the screen.
5% Mask 5% of the screen.
Off No masking.
● Masking is available only when high de fi nition images are input.
Input Signal > Film Mode
20
 Film Mode
Selects this to view movies shot on  fi lm.
Auto For normal circumstances, select this setting.
Off Select this when you are not watching movies shot on  fi lm.
●
 This setting is not available when a progressive signal is input. 
						

							4Settings
36
Setting Menu (Continued)
Installation > Lens Control
21 
Lens Control
Controls the individual motorized function of the lens when setting up t\
he projector
Focus Function for adjusting the lens focus.
Zoom Function for adjusting the lens zoom.
Shift Function for adjusting lens shift. (Press the up/down/left/right button\
 to shift the screen).
Image Pattern
On Displays the image pattern in conjunction with the above setting items.
    Display                                                         
Display for 
lFocus
z:
    for  lZoom
z and 
lShift
z:                                              
              
(Picture of big green grids)                 (Picture of small green \
grids)
Off Do not display the image pattern.
Lock
On Disables lens adjustment. 
A warning message appears when the [LENS] button on the remote control is\
 pressed.
Off Enables lens adjustment.
Installation > Pixel Adjust
22
 Pixel Adjust
Makes fi  ne adjustments of 1 pixel unit for each minor color shift in the horizon\
tal/vertical direction of the image.
Horiz. Red (Move red to left) 1 to 7 (Move red to right)
Horiz. Green (Move green to left) 1 to 7 (Move green to right)
Horiz. Blue (Move blue to left) 1 to 7 (Move blue to right)
Vert. Red (Move red down) 1 to 5 (Move red up)
Vert. Green (Move green down) 1 to 5 (Moves green up)
Vert. Blue (Move blue down) 1 to 5 (Move blue up)
● The horizontal and vertical directions are reversed when the image is  fl ipped to the left or right, or fl  ipped up or down.
● To adjust, use still images with distinct outlines.
● As the adjustments are minor, the effect may be diffi  cult to see for some images.
Installation > Installation Style
23
 Installation Style
Flips the image to the left or right, up or down according to the projec\
tion state of the projector.
Front Select this for tabletop front projection.
Ceiling Mount (F) Select this for ceiling front projection.
Rear Select this for tabletop rear projection.
Ceiling Mount (R) Select this for ceiling rear projection.
Installation > Keystone
24
 Keystone
Compensates for trapezoidal distortion caused by installation.
● 
Refer to  lInstalling the Projector and Screen
z.  (P22
) 
						

							  
ENGLISH
37
Getting StartedPreparationBasic Operation Troubleshooting
Settings Others
Display Setup > Back Color
25 
Back Color
Confi
 gures the screen color displayed when there is no input signal.
Blue Sets screen color to “Blue”.
Black Sets screen color to “Black”.
Display Setup > Menu Position
26
 Menu Position
Sets the display position of the menu. The possible positions for displaying the menu are at the four corners o\
r at center of 
the screen.
Display SetupBack Color
Menu Position
Menu Display
Exit
MENU BACKBack
Select Operate
Line Display
Source Display Logo
Language
EnglishOnOn5sec15sec
Blue
Display Setup > Menu Display
27  Menu Display
Sets the duration for displaying the menu.
15 sec Display for 15 seconds.
On Always display.
Display Setup > Line Display
28
 Line Display
Sets whether to display the input setting when switching the input.
5 sec Display for 5 seconds.
Off Do not display.
Display Setup > Source Display 
29
 Source Display
Sets whether to display the source of input signals when changing the in\
put.
On Display the source of input signals.
Off Do not display.
Display Setup > Logo
30
 Logo
Sets whether to display 
lLogo
z during startup.
On Display for 5 seconds.
Off Do not display. 
						

							4Settings
38
Setting Menu (Continued)
Display Setup > Language
31 
Language
Sets the language of the menu display.
°= Japanese
English English
Deutsch German
Español Spanish
Italiano Italian
Français French
Português Portuguese
Nederlands Dutch
Svenska Swedish
Norsk Norwegian
Русский Russian
ÏÓ Chinese 
Function > Lamp Power
32 
Lamp Power
Confi
 gures the output of the light-source lamp.
Normal For normal circumstances, select this setting. (150W)
High Select this when it is diffi cult to see the image in a bright room. (200W)
● The setting cannot be changed within approximately 90 seconds after this\
 unit has been turned on.
● Settings cannot be changed within approximately 60 seconds after they ar\
e made.
Function > Test Pattern
33
 Test Pattern 
Display 6 types of test patterns.
●
 This can also be displayed by the remote control. (P16 )
Function > Off Timer
34
 Off Timer
Automatically powers off when there is no operation for a certain duration.
Off Disables the off timer.
1 hour Auto power off after 1 hour.
2 hours Auto power off after 2 hours.
3 hours Auto power off after 3 hours.
4 hours Auto power off after 4 hours. 
						

							  
ENGLISH
39
Getting StartedPreparationBasic Operation Troubleshooting
Settings Others
Function > High Altitude Mode
35
 High Altitude Mode
Selects this when using the projector in a location of low atmospheric p\
ressure (higher than 900 meters above sea level).
On Enable.
Off Disable.
Information
InputDisplays the currently selected video input.
Source Displays the type of the current video input signal. 
(If PC signal is input, this item cannot be displayed)
Resolution In the case of PC signal, the resolution is displayed.
H Frequency In the case of PC signal, the horizontal frequency is displayed.
V Frequency In the case of PC signal, the vertical frequency is displayed.
Deep Color Displays the bit depth (color depth) of the video signals input from t\
he HDMI terminals. 
[Deep Color is not displayed when Y Cb Cr (4:2:2) is input.]
Lamp Time Displays the accumulated hours of usage of the light-source lamp. 
						

							4Settings
40
 Customizing Projected Images
You can adjust the projected image to a desired image quality and registe\
r the adjusted value. (Picture 
Mode) Besides the fi
 ve default lCinema 1z, lCinema 2z, lNaturalz, lStagez and  lDynamicz settings, there are 
3 more types of user-defi  ned settings for Picture Mode.
Changing the Initial Setting of
  Picture Mode
lContrastz, lBrightnessz, lColorz, lTintz, lColor Temp.z, lGammaz, lSharpness z, 
lNRz, lCTIz and lLens aperture z are registered in the Picture Mode.
1  Select picture mode
     Adjust picture quality
     Example: To adjust lContrastz 
     1
 Display the setting menu
          Select lPicture Adjustz

 lContrastz 
  
 
          Adjust the setting
      
          To end the adjustments
3  Other items can also be adjusted
     To end
NATURAL DYNAMIC
CINEMA1CINEMA2
STAGE
Contrast0
ExitMENU
BACKBack
Select Operate
   6500K
2
0
0
0
0
Picture ModeContrastBrightness
Color Tint
Color Temp.
Gamma
Advanced
Lens Aperture
Picture Adjust
Reset
Natural
 Normal
Adjust
BACKBACK
MENUMENU
● lContrastz, lBrightness z, lColorz, lTintz, lColor
      Temp. z, lGammaz, lSharpness z, lNRz and lLens
      aperturez can also be adjusted from the remote 
      control.  (
P16) 
  2
3
  4
       2
      4
Select
MENUMENU