Home > Canon > Printer > Canon printer Color imageCLASS MF9150c User Manual

Canon printer Color imageCLASS MF9150c User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer Color imageCLASS MF9150c User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 504
    							Copying
    4-42
    Erasing Shadows/Lines
    1 
    Set originals.
    For details, see “Placing Originals,” on p. 2-4.
    2 
    Press  (Main Menu).
    3 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    , then press [OK].
    4 
    Use [▼], [▲] or  (Scroll Wheel) to 
    display , 
    then press [OK].
    5 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    , then press [OK].
    Original Frame Erase
    This mode erases the dark borders and frame lines that appear around the copy if the original is smaller than 
    the selected paper size. You can also use this mode to create a blank border around the edge of the copy.
    The Original Frame Erase mode cannot be used with the N on 1 mode. 
    						
    							Copying
    4-43
    Erasing Shadows/Lines
    6 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    the original size, then press [OK].
    To switch to the A/B Sizes, press the left Any key 
    to select  .
    ■  If you want to set the same width for all four 
    borders:
    ①
    
      Use [▼], [▲] or 
     (Scroll Wheel) to enter a 
    frame erase width value, then press [OK].
    The default setting is . The 
    maximum original frame erase width that you 
    can set is .
    To enter values in millimeters, press the left Any 
    key to select . When entering the 
    value in millimeters, you can also use [▼], [▲], 
     (Scroll Wheel), and – (numeric keys).
    If you want to change the value, press  
    (Clear) before entering the new value.
    If you enter a value outside the setting range, a 
    message prompting you to enter an 
    appropriate value appears on the screen.
    –
    –
    –
    –
    ■ 
    If you want to set the top, left, right, and 
    bottom widths independently:
    ①
    
      Press the right Any key to select .
    ②  Use [▼], [▲] or  (Scroll Wheel) to select 
    the desired frame erase borders, then press 
    [OK].
    To enter values in millimeters, press the left Any 
    key to select . When entering the 
    value in millimeters, you can also use [▼], [▲], 
     
    (Scroll Wheel), and – (numeric keys). 
    						
    							Copying
    4-44
    Erasing Shadows/Lines
    ③ Use [▼], [▲] or  (Scroll Wheel) to enter a 
    frame erase width value, then press [OK].  
    The default setting is . The 
    maximum original frame erase width that you 
    can set is .
    If you want to change the value, press 
     
    (Clear) before entering the new value.
    If you enter a value outside the setting range, a 
    message prompting you to enter an 
    appropriate value appears on the screen.
    –
    –
    –
    ④ 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    , then press [OK].
    The display will return to the Copy top screen.
    7 
    Use – (numeric keys) to enter the 
    desired copy quantity (1 to 99).
    8 
    Press  (Start).
    If you want to copy multiple originals using the 
    platen glass, set an original and press 
     (Start) 
    once for each page.
    9 
    Press  (Main Menu) to return to the 
    Main Menu screen. 
    						
    							Copying
    4-45
    Erasing Shadows/Lines
    Book Frame Erase
    This mode erases the dark borders and the center and contour lines that appear when you copy facing pages 
    in a book or bound original onto a single sheet of paper.
    The Book Frame Erase mode cannot be used with the N on 1.
    You must place an original on the platen glass when using this function.
    –
    –
    1 
    Set an original on the platen glass.
    For details, see “Placing Originals,” on p. 2-4.
    2 
    Press  (Main Menu).
    3 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    , then press [OK].
    4 
    Use [▼], [▲] or  (Scroll Wheel) to 
    display , 
    then press [OK].
    5 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    , then press [OK]. 
    						
    							Copying
    4-46
    Erasing Shadows/Lines
    6 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    the original size, then press [OK].
    To switch to the A/B Sizes, press the left Any key 
    to select .
    7 
    Enter the each erase width value:
    ■  If you want to specify the erase width 
    value for center:
    ① Use [▼], [▲] or 
     (Scroll Wheel) to select 
    , then press [OK].  
    To enter values in millimeters, press the left Any 
    key to select .
     ② Use [▼], [▲] or  (Scroll Wheel) to enter a 
    frame erase width value, then press [OK].
    The default setting is . The 
    maximum original frame erase width that you 
    can set is .
    When entering the value in millimeters, you 
    can also use [▼], [▲], 
     (Scroll Wheel), or – (numeric keys).
    If you want to change the value, press  
    (Clear) before entering the new value.
    If you enter a value outside the setting range, a 
    message prompting you to enter an 
    appropriate value appears on the screen.
    –
    –
    –
    –
    ■ 
    If you want to specify the erase width 
    value for all sides:
    ①
    
      Use [▼], [▲] or 
     (Scroll Wheel) to select 
    , then press [OK]. 
    						
    							Copying
    4-47
    Erasing Shadows/Lines
    ② Use [▼], [▲] or  (Scroll Wheel) to enter a 
    frame erase width value, then press [OK].
    The default setting is . The 
    maximum original frame erase width that you can 
    set is .
    8 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    , then press [OK].
    9 
    Use – (numeric keys) to enter the 
    desired copy quantity (1 to 99).
    10
      Press  (Start).
    If you want to copy multiple originals using the 
    platen glass, set an original and press 
     (Start) 
    once for each page.
    11
      Press  (Main Menu) to return to the 
    Main Menu screen. 
    						
    							Copying
    4-48
    Erasing Shadows/Lines
    1 
    Set an original on the platen glass.
    For details, see “Placing Originals,” on p. 2-4.
    2 
    Press  (Main Menu).
    3 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    , then press [OK].
    4 
    Use [▼], [▲] or  (Scroll Wheel) to 
    display , 
    then press [OK].
    5 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    , then press [OK].
    Binding Erase
    This mode erases the shadows that appear on copies from binding holes on originals.
    Do not place originals with binding holes into the feeder, as this may damage the originals.
    The borders you do not select are attenuated when using this function.
    You must place an original on the platen glass when using this function.
    –
    –
    – 
    						
    							Copying
    4-49
    Erasing Shadows/Lines
    6 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    the original size, then press [OK].
    To switch to the inch sizes, press the left Any key 
    to select .
    7 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    the hole punch location, then press [OK].
    To enter values in millimeters, press the left Any 
    key to select .
    8 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    the frame erase width, then press [OK].
    The default setting is . The 
    maximum original frame erase width that you 
    can set is .
     If you want to change the value, press 
     
    (Clear) before entering the new value.
    If you enter a value outside the setting range, a 
    message prompting you to enter an 
    appropriate value appears on the screen.
    When entering the value in millimeters, you 
    can also use [▼], [▲], 
     (Scroll Wheel), or – (numeric keys).
    –
    –
    –
    –
    9 
    Use – (numeric keys) to enter the 
    desired copy quantity (1 to 99). 
    						
    							Copying
    4-50
    Erasing Shadows/Lines
    10
     Press  (Start).
    If you want to copy multiple originals using the 
    platen glass, set an original and press 
     (Start) 
    once for each page.
    11
      Press  (Main Menu) to return to the 
    Main Menu screen. 
    						
    							Copying
    4-51
    Adjusting Color Balance
    1 
    Set documents.
    For details, see “Placing Originals,” on p. 2-4.
    2 
    Press  (Main Menu).
    3 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    , then press [OK].
    4 
    Use [▼], [▲] or  (Scroll Wheel) to 
    display , then press 
    [OK].
    5 
    Use [▼], [▲] or  (Scroll Wheel) to select 
    the desired color, then press [OK].
    Adjusting Color Balance
    This mode enables you to adjust the color balance depending on the color of the originals. 
    The adjusted color balance can be stored and named so that you can use them repeatedly. 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer Color imageCLASS MF9150c User Manual