Home > Epson > Printer > Epson AcuLaser 2600DTN User Manual

Epson AcuLaser 2600DTN User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson AcuLaser 2600DTN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 473
    							Cleaning and Transporting the Printer341
    10
    10
    10
    10
    10
    10
    10
    10
    10
    10
    10
    10
    ❏Loaded paper
    ❏Toner Cartridge
    ❏Photoconductor unit
    ❏Installed options
    c
    Caution:
    Before handling the photoconductor unit, be sure to confirm 
    the handling precautions. See  Handling precautions on 
    page 319 for instructions.
    2. Attach the protective materials onto the printer, then repack 
    the printer in its original box.
    For short distances
    Always pay attention to the following handling precautions when 
    you need to move the printer for short distances.
    If you are moving the printer on its own, two people should lift 
    and carry the printer.
    Follow the steps below to move the printer for short distances. 
    1. Turn off the printer and remove the following items:
    ❏Power cord
    ❏Interface cable
    ❏Loaded Paper
    ❏Toner Cartridge
    ❏Photoconductor unit
     
    						
    							342Cleaning and Transporting the Printer❏Installed options
    c
    Caution:
    Before handling the photoconductor unit, be sure to confirm 
    the handling precautions. See  Handling precautions on 
    page 319 for instructions.
    2. Be sure to lift the printer by the correct positions as shown 
    below.
    * Do not lift the printer by these areas.
    3. When moving the printer, always keep it horizontal.
    *
     
    						
    							Cleaning and Transporting the Printer343
    10
    10
    10
    10
    10
    10
    10
    10
    10
    10
    10
    10
    Finding a place for the printer
    When relocating the printer, always choose a location that has 
    adequate space for easy operation and maintenance. Use the 
    following illustration as a guide for the amount of space required 
    around the printer to ensure smooth operation. Dimensions 
    shown in the illustrations below are in centimeters.
    To install and use any of the following options, you will need the 
    indicated amount of additional space.
    The optional paper cassette unit adds 115 mm (4.5 in.) to the 
    bottom of the printer. 
    In addition to space considerations, always heed the following 
    precautions when finding a place to locate the printer:
    100 mm
    100 mm430 mm
    330 mm
    130 mm
     
    						
    							344Cleaning and Transporting the Printer ❏Place the printer where you can easily unplug the power cord.
    ❏Keep the entire computer and printer system away from 
    potential sources of interference, such as loudspeakers or the 
    base units of cordless telephones.
    ❏Avoid using an electrical outlet that is controlled by wall 
    switches or automatic timers. Accidental disruption of power 
    can erase valuable information in your computer’s and 
    printer’s memory.
    c
    Caution:
    ❏Leave adequate room around the printer to allow for sufficient 
    ventilation.
    ❏Avoid locations that are subject to direct sunlight, excessive 
    heat, moisture, or dust.
    ❏Avoid using outlets that other appliances are plugged into.
    ❏Use a grounded outlet that matches the printer’s power plug. 
    Do not use an adapter plug.
    ❏Only use an outlet that meets the power requirements for this 
    printer.
     
    						
    							Troubleshooting345
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    Chapter 11 
    Troubleshooting
    Clearing Jammed Paper
    If paper becomes jammed in the printer, the printer’s LCD panel 
    and EPSON Status Monitor 3 provide alert messages.
    Precautions for clearing jammed paper
    Be sure to observe the following points when you clear jammed 
    paper.
    ❏Do not remove jammed paper by force. Torn paper can be 
    difficult to remove and might cause other paper jams. Pull it 
    gently in order to avoid tearing.
    ❏Always try to remove jammed paper with both hands to avoid 
    tearing it.
    ❏If jammed paper is torn and remains in the printer, or if paper 
    is jammed in a place not mentioned in this chapter, contact 
    your dealer.
    ❏Make sure that the paper type that is loaded is the same as the 
    Paper Type setting in the printer driver.
     
    						
    							346Troubleshooting
    w
    Warning:
    ❏Be careful not to touch the fuser, which is marked CAUTION 
    HIGH TEMPERATURE, or the surrounding areas. If the 
    printer has been in use, the fuser and the surrounding areas 
    may be very hot.
    ❏Do not insert your hand deep into the fuser unit as some 
    components are sharp and may cause injury.
    Jam A (cover A)
    Follow the steps below to clear paper jams at cover A.
    1. Remove all paper that is loaded on the MP tray.
     
    						
    							Troubleshooting347
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    2. Close the MP tray.
    Note:
    Close the expansion trays, if needed, before closing the MP tray.
    3. Push the latch on cover A to the left and open the cover until 
    it stops.
     
    						
    							348Troubleshooting 4. If the optional Duplex Unit is not installed, gently pull out any 
    sheets of paper. Be careful not to tear the jammed paper.
    If the optional Duplex Unit is installed, lift up the Duplex Unit. 
    Hold it and gently pull out any sheets of paper. Be careful not 
    to tear the jammed paper.
    w
    Warning:
    Be careful not to touch the fuser, which is marked CAUTION 
    HIGH TEMPERATURE, or the surrounding areas. If the 
    printer has been in use, the fuser and the surrounding areas 
    may be very hot. If you must touch one of these areas, open 
    cover A and B, then wait 30 minutes to allow the heat to 
    subside before doing so.
     
    						
    							Troubleshooting349
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    11
    5. Close cover A. Then open the MP tray and reload the paper.
    Jam A, B (cover A and B)
    Follow the steps below to clear paper jams at cover A and B.
    1. Remove all paper that is loaded on the MP tray. 
    2. Close the MP tray.
    Note:
    Close the expansion trays, if needed, before closing the MP tray.
     
    						
    							350Troubleshooting 3. Push the latch on cover A to the left and open the cover until 
    it stops.
    4. If the optional Duplex Unit is not installed, gently pull out any 
    sheets of paper. Be careful not to tear the jammed paper.
     
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson AcuLaser 2600DTN User Manual