Epson AcuLaser C4200DNPC5 User Manual

							
Using the Control Panel271
7
7
7
7
7
7
7
7
7
7
7
7
1. Press the Enter button to access the control panel menus. 
2. Press the  dDown  button several times until  Reset Menu 
appears on the LCD panel, then press the  Enter button.
3. Press the  dDown  button several times until  Reset to display.
4. Press the  Enter button. Printing is canceled. The printer is 
ready to receive a new print job.
 
						

							
272Installing Options
Chapter 8 
Installing Options
Optional Paper Cassette Unit
New :delete
 unnecessary i
nformation.For details about the paper types and sizes that you can use with 
the optional paper cassette unit, see Standard lower paper 
cassette and optional paper cassette unit on page 47. For 
specifications, see Optional paper cassette unit on page 420.
You can install the following optional paper cassettes on the 
printer:
❏ A 550-sheet Paper Cassette Unit
❏ A 1100-sheet Paper Cassette Unit
❏ Both a 550-sheet Paper Cassette Unit and a 1100-sheet Paper 
Cassette Unit
Handling precautions
New :quote  t
he
 information
 from
 the s
imilar
 productAlways pay attention to the following handling precautions 
before installing the option:
❏ The optional 1100-sheet paper cassette unit weighs 
approximately 21 kg (46.3 lb); always lift it with two people.
 
						

							
Installing Options273
8
8
8
8
8
8
8
8
8
8
8
8
❏The printer weighs about 34.6 kg (76.3 lb). One person should 
never attempt to lift or carry it alone. Two people should carry 
the printer, lifting it from the positions shown below.
w
Warning:
To lift the printer safely, you must hold it in the positions 
shown above. If carried incorrectly, the printer may be 
dropped and damaged or cause an injury.
Installing the optional paper cassette unit
New :q uote t
he
 information
 from the
 similar
 product/
 delete n
ote
 text i
n
 hostbase p
roduct
 (except
 new h
ostbase).Follow the steps below to install the optional 550-sheet or 
1100-sheet paper cassette Unit.
Note:
The procedure for installing the 550-sheet paper cassette unit is the same 
as that for the 1100-sheet paper casette unit unless otherwise specified.
 
						

							
274Installing Options
1. Turn the printer off and unplug the power cord and all the 
interface cables.
*OFF
c
Caution:
Make sure to unplug the power cord from the printer to 
prevent getting an electrical shock.
2. Carefully remove the optional paper cassette unit from its  carton and place it on the floor.
Note:
❏Make sure you have the four screws packed with the optional 
paper cassette unit.
❏ Remove the protective materials from the unit.
❏ Keep all protective  materials in case you want to ship the 
optional paper cassette unit in the future.
*
 
						

							
Installing Options275
8
8
8
8
8
8
8
8
8
8
8
8
3. Lock the four feet at the bottom of the 1100-sheet paper cassette unit by turning the dials below the feet.
Note:
The 550-sheet paper cassette unit does not have feet.
w
Warning:
Be sure to lock all four feet be fore installing the unit on the 
printer. Otherwise, the unit may move and cause an accident.
4. Carefully, grasp the printer at the position indicated below  and lift it carefully with two people.
 
						

							
276Installing Options
5. Align the corners of the printer and the unit, then lower the 
printer gently onto the unit so that the five pins on top of the 
unit fit into the holes on the bottom of the printer.
 
						

							
Installing Options277
8
8
8
8
8
8
8
8
8
8
8
8
6. Remove the standard lower cassette from the printer.
7. Fasten the front of the optional paper cassette unit to the printer with two of the provided screws.
 
						

							
278Installing Options
8. Remove the cover on the back of the standard lower cassette.
9. Screw the back of the unit to the printer with the remaining 
two screws.
10. Reattach the cover.
11. Reinsert the standard lower cassette into the printer.
 
						

							
Installing Options279
8
8
8
8
8
8
8
8
8
8
8
8
12. Reconnect all the interface cables and the power cord.
13. Plug the printer’s power cord into an electrical outlet.
14. Turn on the printer.
To confirm that the option is installed correctly, print a Status 
Sheet. See Printing a Status Sheet on page 377.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings 
manually in the printer driver. See Making Optional Settings on page 
95.
Note for Macintosh users:
When you have attached or removed printer options, you need to delete 
the printer using Print Setup Utility  (for Mac OS X 10.3),  Print 
Center  (for Mac OS X 10.2 or below), or  Chooser (for Mac OS 9), 
and then re-register the printer.
 
						

							
280Installing Options
Installing the two optional paper cassette units
1. Turn the printer off and unplug the power cord and all the interface cables.
*OFF
c
Caution:
Make sure to unplug the power cord from the printer to 
prevent getting an electrical shock.
2. Carefully remove the optional paper cassette units from their  cartons and place them on the floor.
Note:
❏Make sure you have the four screws packed with each of the 
optional paper cassette unit.
❏ Remove the protective materials from the units.
❏ Keep all protective  materials in case you want to ship the 
optional paper cassette units in the future.
*