Epson AcuLaser C4200DNPC5 User Manual

							
Installing Options281
8
8
8
8
8
8
8
8
8
8
8
8
3. Lock the four feet at the bottom of the 1100-sheet paper cassette unit by turning the dials below the feet.
w
Warning:
Be sure to lock all four feet be fore installing the unit on the 
printer. Otherwise, the unit may move and cause an accident.
 
						

							
282Installing Options
4. Lift the 550-sheet paper cassette unit and align the corners of 
it and the 1100-sheet paper cassette unit. Then lower the 
550-sheet paper cassette unit onto the 1100-sheet paper 
cassette unit so that five pins on top of the 1100-sheet paper 
cassette unit fit into the holes on the bottom of the 550-sheet 
paper cassette unit.
5. Carefully, grasp the printer at the position indicated below  and lift it carefully with two people.
 
						

							
Installing Options283
8
8
8
8
8
8
8
8
8
8
8
8
w
Warning:
Two people should lift the printer by the correct positions as 
shown below.
 
						

							
284Installing Options
6. Align the corners of the printer and the 550-sheet paper 
cassette unit, then lower the printer gently onto the unit so 
that the five pins on top of the unit fit into the holes on the 
bottom of the printer.
 
						

							
Installing Options285
8
8
8
8
8
8
8
8
8
8
8
8
7. Remove the standard lower cassette from the printer and the 550-sheet paper cassette from the unit.
8. Fasten the front of the 550-sheet paper cassette unit to the  printer with the two provided screws.
 
						

							
286Installing Options
9. Fasten the front of the 1100-sheet paper cassette unit to the 
printer with the two provided screws.
10. Remove the cover on the back of the standard lower cassette.
 
						

							
Installing Options287
8
8
8
8
8
8
8
8
8
8
8
8
11. Remove the cover on the back of the 550-sheet paper cassette.
12. Screw the back of the 550-sheet paper cassette unit to the printer with the remaining two screws.
 
						

							
288Installing Options
13. Screw the back of the 1100-sheet paper cassette unit to the 
550-sheet paper cassette unit with the remaining two screws.
14. Reattach the two covers.
15. Reinsert the standard lower cassette into the printer and  550-sheet paper cassette into the unit.
16. Reconnect all the interface cables and the power cord.
17. Plug the printer’s power cord into an electrical outlet.
18. Turn on the printer.
To confirm that the option is installed correctly, print a Status 
Sheet. See Printing a Status Sheet on page 377.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings 
manually in the printer driver. See Making Optional Settings on page 
95.
 
						

							
Installing Options289
8
8
8
8
8
8
8
8
8
8
8
8
Note for Macintosh users:
When you have attached or removed printer options, you need to delete 
the printer using Print Setup Utility  (for Mac OS X 10.3),  Print 
Center  (for Mac OS X 10.2 or below), or  Chooser (for Mac OS 9), 
and then re-register the printer.
Removing the optional paper cassette unit
Perform the installation procedure in reverse.
Memory Module
Ne w  :quote t
he
 i
nformation
 from t
he
 similar p
roduct / confirm whether
 SIMM
 can b
e i
nstalled/
 delete n
ote
 text i
n
 hostbase p
roduct
 (except
 new h
ostbase).By installing a Dual In-line Memory Module (DIMM), you can 
increase printer memory up to 640 MB. You may want to add 
additional memory if you are having difficulty printing complex 
graphics.
Installing a memory module
Follow the steps below to install an optional memory module.
c
Caution:
Before you install a memory module, be sure to discharge any 
static electricity by touching a grounded piece of metal. 
Otherwise, you may damage static-sensitive components.
w
Warning:
Be careful when working inside the printer as some components 
are sharp and may cause injury.
Note:
If the optional Hard Disk Drive is installed, remove it before installing 
a memory module.
 
						

							
290Installing Options
1. Turn the printer off and unplug the power cord and all the 
interface cables.
*OFF
c
Caution:
Make sure to unplug the power cord from the printer to 
prevent getting an electrical shock.
2. Remove the cover on the back of the standard lower cassette.
*