GE Logiq 9 Service Manual

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 3 Installation 3-21
Section 3-12      Loading Base Image Software (cont’d)
The second choice is to load only the bootable portion of the hard drive partition, the “C” partition. This 
is not an option for a new hard drive that has not been previously partitioned for proper LOGIQ 9 
operation.
2.) Select [2} Load the bootable C: partition only - Patient data is NOT lost.
NOTE: DO NOT USE THIS...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
3-22 Section 3-12 - Loading Base Image Software
Section 3-12      Loading Base Image Software (cont’d)
Once you have chosen to continue with Option 1 or Option 2, you will see a screen showing Norton 
Ghost. This automatically loads a base set of software onto the hard disk. Let it run to completion 
(Approximately 8-10 mins).
A message, as shown in Figure 3-14, will be displayed when the process is...

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 3 Installation 3-23
Section 3-12      Loading Base Image Software (cont’d)
3-12-1 System Checks
1.) From the Windows mode display, double-click (RIGHT SET key) on the My Computer icon.
2.) Check the drive letter assignments for the Compact Disk and Removable Disk. They should 
be Compact Disk (G) and Removable Disk (H). 
3.) If the Drive letter assignments are properly mapped, proceed to loading...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
3-24 Section 3-13 - Loading Application Software
Section 3-13
Loading Application Software
3-13-1 Loading Applications Software
NOTE: If you have not done so previously, double-click on the My Computer icon. Check for the drive 
letters assignments of the Removable Drive (MOD) and the CD-ROM Drive. If the CD-ROM 
Drive is not drive “g” and the MOD drive “h” , manually remap the drives.
NOTE: When...

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 3 Installation 3-25
3-13-1Loading Applications Software (cont’d)
6.) As indicated, press any key to continue. The process is completely automated and provides 
you with messages as to its status. R2.1.1 Software provides the message in Figure 3-17.
At this point you just have to wait while the software loads (Approximately 7-8 minutes).
NOTE: When the Information Window appears asking you to...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
3-26 Section 3-13 - Loading Application Software
3-13-1Loading Applications Software (cont’d)
7.) When the process has completed, the window will turn dark red and you will see the following 
message in Figure 3-18.
8.) When it completes loading the system will reboot.
If possible while the system is rebooting remove the CD from the drive. If the CD is remove the system 
will automatically reboot into...

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 3 Installation 3-27
3-13-1Loading Applications Software (cont’d)
12.) During the reboot process, the system may ask for the option string (valid license) to be 
entered. If this is necessary it will be included in the installation paperwork.
NOTE: Starting with R3.x Software, all systems must have at least the basic option string in order for 
the software to run. Any single option string may...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
3-28 Section 3-14 - System Setup
Section 3-14
System Setup
3-14-1 To Complete the System Setup
1.) From the Touch Screen on the scanner, select Utility>Connectivity>TCPIP Tab. 
2.) Ensure that DHCP is deselected so you can enter information manually.
3.) Input the DICOM information.
* This should be the appropriate DICOM information for the system if it is on the hospital 
network.  If it is not correct,...

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 3 Installation 3-29
3-14-5 Restore Patient, Report, and User-Defined Presets
1.) Place the Backup/Restore media (MOD or CD-R) in the drive.
2.) Select the UTILITY
 tab on the Touch Panel. Select SYSTEM, then BACKUP/RESTORE. 
3.) Select everything under Restore by placing a check mark after Patient Archive, Report 
Archive, System Configuration, and User Defined Configuration. Then press RESTORE
....

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
3-30 Section 3-15 - Optional Software Procedures
Section 3-15
Optional Software Procedures
If everything went well in the software loading process, skip this section.
While system software loading procedures are automatic, the following manual processes are provided 
in the unlikely event that the automatic process fails or the results are incorrect.
3-15-1 serialno.txt File Creation
With the exception...