Honeywell 1900gsr 2 User Manual

							Xenon/Granit User Guide 281
Scan While in Base Cradle Scan in Cradle Off BT_SIC092
*Scan in Cradle On BT_SIC192
Shut Down Scanner in Cradle  BT_SIC292
Base Charge Modes Base Charge Off BASCHG090
*External or Interface Cable Power BASCHG190
External Power Only BASCHG290
Page Mode *On BEPPGE192
Off BEPPGE092
Page Pitch Range 400 - 9000 Hz (*1000) BEPPFQ####93
*Low (1000 Hz) BEPPFQ100093
Medium (3250 Hz) BEPPFQ325093
High (4200 Hz) BEPPFQ420093
Linking Sound *Linking Sound BT_ACS193
Silent Linking BT_ACS093
Beeper Pitch - Base Error *Razz (250) (min 200Hz) BASFQ225094
Medium (3250) BASFQ2325094
High (4200) (max 9000Hz) BASFQ2420094
Number of Beeps  - Base Error Range 1 - 9 (*1) BASERR#94
Scanner Report Scanner Report RPTSCN94
Scanner Address Scanner Address BT_LDA94
Base or Access Point Address Base Address:*:BASLDA95
Scanner Modes Charge Only Mode:*:BASLNK095
*Charge and Link Mode:*:BASLNK195
Locked Link Mode BASCON0,DNG196
*Open Link Mode BASCON1,DNG196
Unlink Scanner BT_RMV96
Override Locked Scanner BT_RPL197
Out-of-Range Alarm Base Alarm  Duration (Range 1 - 
3000 sec (*0))BASORD97
Scanner Alarm Duration (Range 1 
- 3000 sec (*0))BT_ORD97
Alarm Sound Type Base Alarm Type BASORW97
Scanner Alarm Type BT_ORW97
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							282 Xenon/Granit User Guide
Scanner Power Time-Out Timer Timer (0-7200 seconds) BT_LPT098
200 Seconds BT_LPT20099
*400 Seconds BT_LPT40099
900 Seconds BT_LPT90099
3600 Seconds BT_LPT360099
7200 Seconds BT_LPT720099
Flexible Power Management Full Power BT_TXP8100
*Medium High Power BT_TXP7100
Medium Power BT_TXP4100
Low Power BT_TXP1100
Batch Mode Automatic Batch Mode BATENA1101
*Batch Mode Off BATENA0101
Inventory Batch Mode BATENA2101
Persistent Batch Mode BATENA3101
Batch Mode Beep Off BATBEP0101
*On BATBEP1101
Batch Mode Storage *Flash Storage BATNVS1101
RAM Storage BATNVS0101
Batch Mode Quantity *Off BATQTY0102
On BATQTY1102
Quantity Codes 0 BATNUM0103
*1 BATNUM1103
2BATNUM2103
3BATNUM3103
4BATNUM4103
5BATNUM5103
6BATNUM6104
7BATNUM7104
8BATNUM8104
9BATNUM9104
Batch Mode Output Order *FIFO BATLIF0104
LIFO BATLIF1104
Total Records Total Records BATNRC104
Delete Last Code Delete Last Code BATUND105
Clear All Codes Clear All Codes BATCLR105
Transmit Records to Host Transmit Inventory Records BAT_TX105
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							Xenon/Granit User Guide 283
Batch Mode Transmit Delay *Off BATDLY0105
Short (ms) BATDLY250106
Medium (ms) BATDLY500106
Long (ms) BATDLY1000106
Scanner Name Name 1-7 BT_NAM#####107
Reset RESET_107
Scanner Name BT_NAM107
Bluetooth Connection Bluetooth PIN Code BT_PIN107
Auto Reconnect Mode *Auto Reconnect On BT_ACM1108
Auto Reconnect Off BT_ACM0108
Maximum Link Attempts Maximum Link Attempts (*4) BT_MLA###109
Relink Time-Out Relink Time-Out (*2) BT_RLT###109
Host Command Acknowledgment Host ACK On HSTACK1111
*Host ACK Off HSTACK0111
Host ACK Timeout HSTATO##112
Input/Output Selections
Power Up Beeper Power Up Beeper Off - Scanner BEPPWR0113
*Power Up Beeper On - Scanner BEPPWR1113
Power Up Beeper Off - Cordless 
BaseBASPWR0113
Power Up Beeper On - Cordless 
BaseBASPWR1113
Beep on BEL Character Beep on BEL On BELBEP1114
*Beep on BEL Off BELBEP0114
Trigger Click On BEPTRG1114
*Off BEPTRG0114
Beeper - Good Read  Off BEPBEP0114
*On BEPBEP1114
Beeper Volume - Good Read Off BEPLVL0114
*Low (Default-Xenon HC) BEPLVL1115
Medium BEPLVL2115
*High BEPLVL3115
Beeper Pitch - Good Read  
(Frequency)Low (1600) (min 400Hz) BEPFQ11600115
*Medium - Xenon (2700 Hz) BEPFQ12700115
*Medium - Granit (3200 Hz) BEPFQ13200115
High (4200) (max 9000Hz) BEPFQ14200115
Vibrate - Good Read Vibrate - Good Read Off TFBGRD0115
*Vibrate - Good Read On TFBGRD1115
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							284 Xenon/Granit User Guide
Vibrate Duration Duration
(100 - 2,000 ms) *300TFBDUR####116
Beeper Pitch - Error (Frequency) *Razz (250) (min 200Hz) BEPFQ2800116
Medium (3250) BEPFQ23250116
High (4200) (max 9000Hz) BEPFQ24200116
Beeper Duration - Good Read *Normal Beep BEPBIP0117
Short Beep BEPBIP1117
LED - Good Read  Off BEPLED0117
*On BEPLED1117
Number of Beeps - Error  *1 BEPERR3117
Range 1 - 9 BEPERR#117
Number of Beeps - Good Read  *1 BEPRPT1117
Range 1 - 9 BEPRPT#117
Beeper Volume Max Beeper Volume Max PAPBLM118
Good Read Delay *No Delay DLYGRD0118
Short Delay (500 ms) DLYGRD500118
Medium Delay (1000 ms) DLYGRD1000118
Long Delay (1500 ms) DLYGRD1500118
User-Specified Good Read Delay Range 0 - 30,000 ms DLYGRD#####119
Trigger Modes *Manual Trigger - Normal PAPHHF119
Manual Trigger - Enhanced (not 
supported by Granit 1980i and 
1981i)PAPHHS119
Trigger Toggle
*Trigger Toggle Off TRGTGM0120
Trigger Toggle - Image Capture TRGTGM1120
Trigger Toggle Off - Cell Phone 
ReadTRGTGM2120
Trigger Toggle Off - Centering TRGTGM3120
Trigger Number
2 Quick Triggers TRGTPC2120
3 Quick Triggers TRGTPC3120
4 Quick Triggers TRGTPC4120
Trigger Timing
Trigger Timing (Range 50 - 2000) 
*400TRGTTI####120
Trigger Toggle Timeout
Trigger Toggle Timeout (Range 0 - 
65) *5TRGTGT##121
Serial Trigger Mode Read Time-Out
(0 - 300,000 ms) *30,000TRGSTO####121
Motion Activation Motion Activation On - Trigger 
ModeMOTENA1;MOTMOD0122
*Motion Activation Off MOTENA0121
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							Xenon/Granit User Guide 285
Presentation Mode Presentation Mode PAPTPR122
Presentation Motion Activation Scanner Motion Detection On MOTENA1;MOTMOD8;MOT1W
R1122
Scanner Cradle Detection On MOTENA1;MOTMOD8;MOT1W
R0122
*Motion Activation Off MOTENA0122
Presentation LED Behavior After 
Decode*LEDs On TRGPCK1123
LEDs Off TRGPCK0123
Presentation Sensitivity (not 
supported by Granit 1980i and 
1981i)Range 0-20 (*1) TRGPMS##123
Presentation Centering Window Presentation Centering On PDCWIN1124
*Presentation Centering Off PDCWIN0124
Left of Presentation Centering 
Window (*40%)PDCLFT###125
Right of Presentation Centering 
Window (*60%)PDCRGT###125
Top of Presentation Centering 
Window (*40%)PDCTOP###125
Bottom of Presentation Centering 
Window (*60%)PDCBOT###125
In-Stand Sensor Mode Sensor On TRGSSW1125
Sensor Off TRGSSW0125
Poor Quality Codes Poor Quality 1D Reading On DECLDI1126
*Poor Quality 1D Reading Off DECLDI0126
Poor Quality PDF Reading On PDFXPR10126
*Poor Quality PDF Reading Off PDFXPR0126
Low Resolution PDF Codes On PDFDMI1127
Low Resolution PDF Codes Off PDFDMI0127
CodeGate *CodeGate Off Out-of-Stand AOSCGD0.127
CodeGate On Out-of-Stand AOSCGD1.127
Streaming Presentation Streaming Presentation Mode - 
NormalPAPSPN128
Streaming Presentation Mode - 
Enhanced (not supported by 
Granit 1980i and 1981i)PAPSPE128
Mobile Phone Read Mode (not 
supported by Granit 1980i and 
1981i)Hand Held Scanning - Mobile 
PhonePAPHHC128
Streaming Presentation - Mobile 
PhonePAPSPC128
Hands Free Time-Out Range 0 - 300,000 ms TRGPTO######129
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							286 Xenon/Granit User Guide
Reread Delay Short (500 ms) DLYRRD500129
*Medium (750 ms) DLYRRD750129
Long (1000 ms) DLYRRD1000129
Extra Long (2000 ms) DLYRRD2000129
User-Specified Range 0 - 30,000 ms DLYRRD#####130
2D Reread Delay *2D Reread Delay Off DLY2RR0130
Short (1000ms) DLY2RR1000130
Medium (2000ms) DLY2RR2000130
Long (3000ms) DLY2RR3000130
Extra Long (4000ms) DLY2RR4000130
Character Activation Mode *Off HSTCEN0130
On HSTCEN1130
Activation Character (Range 0-
255) *12 [DC2]HSTACH###131
Do Not End Character Activation 
After Good ReadHSTCGD0131
End Character Activation After 
Good ReadHSTCGD1131
Character Activation Timeout 
(Range 1 - 300,000) *30,000 msHSTCDT######132
Character Deactivation Mode *Off HSTDEN0132
On HSTDEN1132
Deactivation Character (Range 0-
255) *14 [DC4]HSTDCH###132
Illumination Lights *Lights On SCNLED1133
Lights Off SCNLED0133
Aimer Delay 200 milliseconds SCNDLY200133
400 milliseconds SCNDLY400133
*Off (no delay) SCNDLY0133
User-Specified Aimer Delay Range 0 - 4,000 ms SCNDLY####134
Active Aimer (only supported by 
Granit 1920i)Active Aimer On SCNAIM4134
Aimer Mode (not supported by 
Granit 1980i and 1981i)Off SCNAIM0134
*Interlaced SCNAIM2134
Single Code Centering Single Code Centering DECWIN1;DECTOP49;DECBOT
51;DECRGT51;DECLFT49135
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							Xenon/Granit User Guide 287
Centering Window Centering On DECWIN1136
*Centering Off DECWIN0136
Left of Centering Window (*40%) DECLFT###137
Right of Centering Window (*60%) DECRGT###137
Top of Centering Window (*40%) DECTOP###137
Bottom of Centering Window 
(*60%)DECBOT###137
Preferred Symbology On PRFENA1138
*Off PRFENA0138
High Priority Symbology PRFCOD##138
Low Priority Symbology PRFBLK##138
Preferred Symbology Timeout
(*500) Range 100-3000PRFPTO####139
Preferred Symbology Default PRFDFT139
Output Sequence Editor Enter Sequence SEQBLK141
Default Sequence SEQDFT142
Partial Sequence Transmit Partial Sequence SEQTTS1142
*Discard Partial Sequence SEQTTS0142
Require Output Sequence Required SEQ_EN2142
On/Not Required SEQ_EN1142
*Off SEQ_EN0142
Multiple Symbols On SHOTGN1143
*Off SHOTGN0143
No Read On SHWNRD1143
*Off SHWNRD0143
Video Reverse Video Reverse Only VIDREV1144
Video Reverse and Standard Bar 
CodesVIDREV2144
*Video Reverse Off VIDREV0144
Working Orientation *Upright ROTATN0145
Vertical, Bottom to Top (Rotate 
CCW 90°)ROTATN1145
Upside Down ROTATN2145
Vertical, Top to Bottom (Rotate CW 
90°)ROTATN3145
Healthcare Selections
Quiet Operations - Combination 
CodesSilent Mode with Flashing LED - 
Cordless Scanner and Basebeplfn5;beplfr50;beppar0;basp
wr0;beppwr0;baslvl0;beplvl0;be
pbip0;bepFQ12700;beplot0.147
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							288 Xenon/Granit User Guide
Silent Mode with Flashing LED - 
Corded Scannerbeplfn5;beplfr50;beppwr0;beplv
l0;bepbip0;bepFQ12700;beplot
0.147
Silent Mode with Long LED - 
Cordless Scanner and Basebeplfn0;beplfr10;beppar0;basp
wr0;beppwr0;baslvl0;beplvl0;be
pbip0;bepFQ12700;beplot1.148
Silent Mode with Long LED - 
Corded Scannerbeplfn0;beplfr10;beppwr0;beplv
l0;bepbip0;bepFQ12700;beplot
1.148
Very Low Beeper (Nighttime 
Mode) - Cordless Scanner and 
Basebeplfn0;beplfr10;beppar0;basp
wr0;beppwr1;baslvl1;beplvl1;be
pbip1;bepFQ14200;beplot0.148
Very Low Beeper (Nighttime 
Mode) - Corded Scannerbeplfn0;beplfr10;beppwr1;beplv
l1;bepbip1;bepFQ14200;beplot
0.148
Low Beeper (Daytime Mode) - 
Cordless Scanner and Basebeplfn0;beplfr10;beppar1;basp
wr1;beppwr1;baslvl1;beplvl1;be
pbip0;bepFQ12700;beplot0.149
Low Beeper (Daytime Mode) - 
Corded Scannerbeplfn0;beplfr10;beppwr1;beplv
l1;bepbip0;bepFQ12700;beplot
0.149
Quiet Operations - LED and Volume Settings
Linking LED Colors and 
Sound*Green LED Flashes/Sound BEPPAR1149
Red LED Flashes/Silent BEPPAR0149
Number of LED Flashes *1 LED Flash BEPLFN0150
5 LED Flashes BEPLFN5150
10 LED Flashes BEPLFN10150
25 LED Flashes BEPLFN25150
LED Flash Rate *Fast Flash BEPLFR50150
Medium Flash BEPLFR250150
Slow Flash BEPLFR500150
LED Solid (No Flash) *LED Solid Off (Resume Flash) BEPLOT0151
LED Solid 1 Second BEPLOT1151
LED Solid 3 Seconds BEPLOT3151
LED Solid 5 Seconds BEPLOT5151
Page Volume Control Page Volume Off BEPPGV0151
*Page Volume Low  BEPPGV1151
Page Volume Medium BEPPGV2152
Page Volume High BEPPGV3152
Out-of-Range Alarm Volume Base Alarm Volume Off BASORV0152
Scanner Alarm Volume Off BT_ORV0152
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							Xenon/Granit User Guide 289
*Base Alarm Volume Low BASORV1152
*Scanner Alarm Volume Low BT_ORV1152
Base Alarm Volume Medium BASORV2152
Scanner Alarm Volume Medium BT_ORV2153
Base Alarm Volume High BASORV3153
Scanner Alarm Volume High BT_ORV3153
Out-of-Range Delay Out-of-Range Delay
(*0 No Delay) Range 0-3000BT_ORY####153
DPM Settings
DPM Illumination Settings Low Contrast Codes SDRMTC15{2+50+400+16000+
4+180+35+1+}11000+15{2+50
+400+16000+4+180+97+1+}11
000+15{2+50+400+16000+4+1
80+90+1+}00100+15{2+50+40
0+16000+4+180+97+1+}00100
+155
Cycle Illumination SDRMTC30{2+50+400+9000+4
+180+97+1+}11000+30{2+50+
400+9000+4+180+97+1+}0010
0+156
Direct Illumination - Top and 
BottomSDRMTC1{2+50+400+9000+4+
180+97+1+}11000+156
Direct Illumination - Bottom SDRMTC1{2+50+400+9000+4+
180+97+1+}10000+156
Indirect IlluminationSDRMTC1{2+50+400+9000+4+
180+97+1+}00100+156
Low Contrast Data Matrix 
Enhancements* Low Contrast Data Matrix 
Enhancements OnDEPMENA1156
Low Contrast Data Matrix 
Enhancements OffDPMENA0157
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR161
Prefix Add Prefix PREBK2##161
Clear One Prefix PRECL2161
Clear All Prefixes PRECA2161
Suffix Add Suffix SUFBK2##161
Clear One Suffix SUFCL2161
Clear All Suffixes SUFCA2161
Function Code Transmit *Enable RMVFNC0162
Disable RMVFNC1162
Intercharacter Delay Range 0 - 1000 (5ms increments) DLYCHR##162
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage 
						

							290 Xenon/Granit User Guide
User Specified 
Intercharacter DelayDelay Length
0 - 1000 (5ms increments)DLYCRX##163
Character to Trigger Delay DLY_XX##163
Interfunction Delay Range 0 - 1000 (5ms increments) DLYFNC##163
Intermessage Delay Range 0 - 1000 (5ms increments) DLYMSG##164
Data Formatter Selections
Data Format Editor *Default Data Format (None) DFMDF3166
Enter Data Format DFMBK3##167
Clear One Data Format DFMCL3167
Clear All Data Formats DFMCA3167
Data Formatter Data Formatter Off DFM_EN0181
*Data Formatter On,
Not Required, 
Keep Prefix/SuffixDFM_EN1182
Data Format Required,
Keep Prefix/SuffixDFM_EN2182
Data Formatter On,
Not Required, 
Drop Prefix/SuffixDFM_EN3182
Data Format Required,
Drop Prefix/SuffixDFM_EN4182
Data Format Non-Match Error Tone *Data Format Non-Match Error 
Tone OnDFMDEC0182
Data Format Non-Match Error 
Tone OffDFMDEC1182
Primary/Alternate Data Formats Primary Data Format ALTFNM0183
Data Format 1 ALTFNM1183
Data Format 2 ALTFNM2183
Data Format 3 ALTFNM3183
Single Scan Data Format Change Single Scan-Primary 
Data FormatVSAF_0183
Single Scan-Data Format 1 VSAF_1183
Single Scan-Data Format 2 VSAF_2183
Single Scan-Data Format 3 VSAF_3184
Symbologies
All Symbologies All Symbologies Off ALLENA0186
All Symbologies On ALLENA1186
Codabar Default All Codabar 
SettingsCBRDFT187
Off CBRENA0187
*On CBRENA1187
SelectionSetting
* Indicates defaultSerial Command
# Indicates a numeric 
entryPage