Honeywell 1900gsr 2 User Manual

							Xenon/Granit User Guide21
Gilbarco® Terminal
Scan the following Plug and Play code to program the scanner for a Gilbarco termi-
nal. This bar code sets the baud rate to 2400 bps and the data format to 7 data bits, 
even parity, 2 stop bits. It also adds a carriage return (CR) suffix and programs the 
following prefixes for each symbology:
Honeywell Bioptic Aux Port
Scan the following Plug and Play code to program the scanner for a Honeywell 
bioptic scanner auxiliary port configuration. This bar code sets the baud rate to 
38400 bps and the data format to 8 data bits, no parity, 1 stop bit. 
Datalogic™ Magellan® Aux Port
Scan the following Plug and Play code to program the scanner for a Datalogic 
Magellan auxiliary port configuration. This bar code sets the baud rate to 9600 bps 
and the data format to 8 data bits, no parity, 1 stop bit. 
Verifone Ruby Settings
SymbologyPrefix
UPC-A A
UPC-E E0
EAN-8 FF
EAN-13 F
Gilbarco Settings
Honeywell Bioptic Settings
Datalogic Magellan Settings 
						

							22Xenon/Granit User Guide
NCR Bioptic Aux Port
Scan the following Plug and Play code to program the scanner for an NCR bioptic 
scanner auxiliary port configuration. The following prefixes are programmed for 
each symbology:
Wincor Nixdorf Terminal
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf 
terminal. This bar code sets the baud rate to 9600 bps and the data format to 8 
data bits, no parity, 1 stop bit. 
Wincor Nixdorf Beetle™ Terminal
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf 
Beetle terminal. The following prefixes are programmed for each symbology:
SymbologyPrefixSymbologyPrefix
UPC-A A Interleaved 2 of 5 b
UPC-E E0 Code 128 f
Code 32 
Pharmaceutical 
(PARAF)a
EAN-8 FF Code 39 a
EAN-13 F
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings
SymbologyPrefixSymbologyPrefix
Aztec Code V Interleaved 2 of 5 I
Codabar N MaxiCode T
Code 93 L MicroPDF417 S
Code 128 K PDF417 Q
Data Matrix R QR Code U
EAN-8 B Straight  2 of 5 IATA H
EAN-13 A UPC-A A0
GS1 DataBar E UPC-E C
GS1-128 P All other bar codes M 
						

							Xenon/Granit User Guide23
Wincor Nixdorf RS232 Mode A
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf 
RS232 Mode A terminal. This bar code sets the baud rate to 9600 bps and the data 
format to 8 data bits, odd parity, 1 stop bit. The following prefixes are programmed 
for each symbology:
Note:This setting is not supported in Granit devices.
Keyboard Country Layout
If your interface is USB Keyboard or Keyboard Wedge, your keyboard layout default 
is a US keyboard.  To change this layout, scan the appropriate Keyboard Country 
bar code below.  By default, national character replacements are used for the fol-
lowing characters:  #  $  @  [    ]  ^  ‘  {  |  }  ~.  Refer to the "ISO 2022/ISO 646 
Character Replacements" on page A-346 to view the character replacements for 
each country. 
Wincor Nixdorf Beetle Settings
SymbologyPrefixSymbologyPrefix
Code 128 K EAN-13 A
Code 93 L GS1-128 K
Codabar N Interleaved 2 of 5 I
UPC-A A0 Plessey O
UPC-E C Straight 2 of 5 IATA H
EAN-8 B GS1 DataBar E
All other bar codes M
Wincor Nixdorf RS232 Mode A 
Settings
Keyboard Countries
* United States 
Albania 
						

							24Xenon/Granit User Guide
Keyboard Countries (Continued)
Azeri (Cyrillic)
Azeri (Latin)
Belarus
Belgium
Bosnia
Brazil
Brazil (MS)
Bulgaria (Cyrillic)
Bulgaria (Latin)
Canada (French legacy)
Canada (French)
Canada (Multilingual) 
						

							Xenon/Granit User Guide25
Keyboard Countries (Continued)
Croatia
Czech
Czech (Programmers)
Czech (QWERTY)
Czech (QWERTZ)
Denmark
Dutch (Netherlands)
Estonia
Faroese
Finland
France
Gaelic 
						

							26Xenon/Granit User Guide
Keyboard Countries (Continued)
Germany
Greek
Greek (220 Latin)
Greek (220)
Greek (319 Latin)
Greek (319)
Greek (Latin)
Greek (MS)
Greek (Polytonic)
Hebrew
Hungarian (101 key)
Hungary 
						

							Xenon/Granit User Guide27
Keyboard Countries (Continued)
Iceland
Irish
Italian (142)
Italy
Japan ASCII
Kazakh
Kyrgyz (Cyrillic)
Latin America
Latvia
Latvia (QWERTY)
Lithuania
Lithuania (IBM) 
						

							28Xenon/Granit User Guide
Keyboard Countries (Continued)
Macedonia
Malta
Mongolian (Cyrillic)
Norway
Poland
Polish (214)
Polish (Programmers)
Portugal
Romania
Russia
Russian (MS)
Russian (Typewriter) 
						

							Xenon/Granit User Guide29
Keyboard Countries (Continued)
SCS
Serbia (Cyrillic)
Serbia (Latin)
Slovakia
Slovakia (QWERTY)
Slovakia (QWERTZ)
Slovenia
Spain
Spanish variation
Sweden
Switzerland (French)
Switzerland (German) 
						

							30Xenon/Granit User Guide
Keyboard Style
This programs keyboard styles, such as Caps Lock and Shift Lock. If you have used 
Keyboard Conversion settings, they will override any of the following Keyboard 
Style settings. Default = Regular.
Keyboard Countries (Continued)
Tatar
Turkey F
Turkey Q
Ukrainian
United Kingdom
United States (Dvorak)
United States (Dvorak left)
United Stated (Dvorak 
United States (International)
Uzbek (Cyrillic)