Konica Minolta bizhub C550 User Manual

							Printing a user box document4
C5504-14 – When the “2 Position” Staple setting is selected:
– When a Punch setting is selected:
– On the North American (inch) model:
– On the European (metric) model:
6If finisher FS-608 is installed, touch [Fold/Bind]. If finisher FS-517/FS-
518 is installed, touch [Fold].
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a user box document4
C5504-15
7Touch [Yes], and then select the desired folding method.
– If finisher FS-608 is installed
– If finisher FS-517/FS-518 is installed
8Touch [OK], and then touch [OK] in the next screen that appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a user box document4
C5504-16 Adding a binding margin
A binding margin can be added to the left or right side or to the top of the 
printed pages. Settings can be specified for the following.
1In the Print screen, touch [Page Margin].
2Touch [Yes].
3Select the desired position for the binding margin, and then use the 
keypad to specify the width of the binding margin.
– The width of the binding margin can be specified in 1/16-inch incre-
ments on the North American (inch) model (in 0.1 mm increments 
on the European (metric) model).
– To set the binding margin to 0 mm, touch [None].
ParameterDescription
Margin Position Select the location where the binding margin is to be added. If “Au-
to” is selected, a binding margin along the long side of the paper is 
selected if the document length is less than 11-11/16 inches on the 
North American (inch) model (less than 297 mm on the European 
(metric) model). If the document length is more than 11-11/16 inches 
on the North American (inch) model (more than 297 mm on the Eu-
ropean (metric) model), a binding margin along the short side of the 
paper is selected.
Adjust Value An area with a width between 1/16 and 3/4 inches on the North 
American (inch) model (between 0.1 and 20.0 mm on the European 
(metric) model) can be specified. To specify a binding margin of 0 
mm, touch [None].
Image Shift When a binding margin is created, the image can be shifted accord-
ing to the position of the created binding margin. The image can be 
shifted between 1/16 and 10 inches on the North American (inch) 
model (between 0.1 and 250 mm on the European (metric) model) 
left, right, up or down, depending on the position of the binding mar-
gin. If the document is to be printed double-sided, touch [Change 
Back Shift] to also specify the shift on the back side of the pages.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a user box document4
C5504-17 – On the North American (inch) model:
– On the European (metric) model:
4To move the image according to the binding margin, touch [Image 
Shift].
The Image Shift screen appears.
– On the North American (inch) model:
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a user box document4
C5504-18 – On the European (metric) model:
5Touch [OK].
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a user box document4
C5504-19 Adding cover pages (Cover Sheet)
Documents can be printed with cover pages added to the front and back.
First, load the paper trays with the paper for the front cover page and the 
back cover page.
Settings can be specified for the following.
ParameterDescription
Front Cover None Select this setting to add no front cover.
Front  (Copy) Select this setting to print the first page of the document onto the 
front cover page.
If “2-Sided” is selected, the second page of the document is 
printed on the back of the front cover page.
Front (Blank) Select this setting to add the front cover page in front of the first 
page of the document.
Back Cover None Select this setting to add no back cover.
Back  (Copy) Select this setting to print the last page of the document onto the 
back cover page.
If “2-Sided” is selected, the last two pages of the document are 
printed on the back cover page.
Back  (Blank) Select this setting to add the back cover page after the last page 
of the document.
4
43
32
21
1
REPORT
4
43
32
21
1
REPORTREPORT
4
43
32
22
21
1
REPORT
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a user box document4
C5504-20
2
Note 
If a setting for the “Cover Sheet” function is to be specified when printing 
a copied document, either of the following conditions must be met when 
saving the document in a user box.
A paper tray is specified.
A Cover Sheet setting is specified.
1In the Print screen, touch [Sheet/Cover/Chapter Insert].
2Touch [Cover Sheet].
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a user box document4
C5504-21
3Select the desired cover page format.
– On the North American (inch) model:
– On the European (metric) model:
– To select the post inserter tray, select “Front (Blank)” or “Back 
(Blank)”.
4Select the paper trays loaded with the paper for the front and back cov-
er pages. Touch [Paper].
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a user box document4
C5504-22 – On the North American (inch) model:
– On the European (metric) model:
5Select the paper tray loaded with the paper for the front or back cover 
page.
– On the North American (inch) model:
Downloaded From ManualsPrinter.com Manuals 
						

							Printing a user box document4
C5504-23 – On the European (metric) model:
6Touch [OK], and then touch [OK] in the next screen that appears.
Downloaded From ManualsPrinter.com Manuals