NEC Conference 911 Installation Guide

							NDA-30133 Revision 1.0Page 13
Conference 911 Installation Guide Installing the C911 Server Software
Figure 3-4   Release Media Device menu
4. Type F and press Enter to choose the Floppy Disk Device.
The Installation Procedure screen is displayed, prompting you to insert the C911 
installation diskette in the floppy disk device.
Figure 3-5   Insert C911 Disk prompt
5. Insert the disk labeled “C911 Server Release 3.0” into the floppy disk device and 
press Enter.
The screen displays the status of the application files as they are installed. 
  
Installation of Applications/Packages
Available Packages are:
applications    asl    mtl    tcpip    update     x25   
Enter Package to be installed:  applications
Release Media Devices are:
(F)loppy Disk Device(C)artridge Tape Device
Enter Release Media Device:  F
NEC America                 APM Administration                 Sat - Sep 11, 1999 
  
Installation Procedure
Installing from /dev/fd0
Insert OAI Release Media #1 
Enter  to continue: 
						

							Page 14NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Figure 3-6   Processing C911 Installation Files
When all the files from the disk have been installed, the prompt “Has all the 
release media been loaded [y or n]?” is displayed.
6. Type y at the prompt and press Enter.
Figure 3-7   Root Password prompt
The prompt “Password” is displayed for you to enter the root (Super User) 
password. 
7. Type the root password and press Enter.
The APM installation procedures begin processing the C911 installation files. 
  Installation Procedure
Installing from /dev/fd0
Insert OAI Release Media #1 
Enter  to continue:
Copying...
tar: block size = 20
x oai/app/C911/bin/agent, 69955 bytes, 137 tape blocks
Has all release media been loaded? [y or n] ? y
x oai/app/c911/bin/monitor, 259623 bytes, 508 tape blocks
x oai/app/c911/bin/report, 231124 bytes, 452 tape blocks
x oai/chksum_app, 553 bytes, 2 tape blocks
C911 Installation
Installation requires Super User (root) password.
You will need the root password.
Password: 
						

							NDA-30133 Revision 1.0Page 15
Conference 911 Installation Guide Installing the C911 Server Software
Figure 3-8   Configure Monitor prompt
The screen indicates the status of the installation as it defines the database files 
and processes the installation files. You will see messages indicating that the 
databases are defined.
Note:If there is a problem with the files during C911 installation, the message 
“Validation error, OAI installation failed” is displayed.
When the installation is complete, “C911 installation has completed successfully” 
is displayed. Then, “Please press Enter to return to APM Administration menu.” is 
displayed.
8. Press Enter. 
The APM Administration Main menu is displayed.
Processing Files
Installing the Release Files
Conference 911 Installation Procedure for SCO UNIX
Transferring database definition files...
Agent Database defined.
Ali Database defined.
Customer Database defined.
PBX Database defined.
Pager Database defined.
Station Database defined.
Trunk Database defined. 
						

							Page 16NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Installing the Message Server
To install the Message Server software, you must use a UNIX terminal to access the 
APM. (For more information about the general installation process, refer to the APM 
Operations Manual.)
Use the following steps to install the Message Server software:
Figure 3-9   APM Administration Main menu
1. From the APM Administration Main menu, type i at the prompt and press Enter to 
choose the Installation of Applications/Packages option. 
The “Enter Package to be installed” prompt is displayed. 
Figure 3-10   Installation Applications/Packages menu
  
APM Platform Release   Rel3.1.2     (Feb 2, 1999)
Main Menu
APM
Debug Facilities
Halt APM System
File Archive
Installation of Applications/Packages
Configuration of UAP
Removal of Packages
Startup APM System
Manage Activation Keys
Logout
UNIX
Enter Option:  [i]
APM Status: ACTIVE
NEC America                 APM Administration                 Sat - Sep 11, 1999 
  
Installation of Applications/Packages
Available Packages are:
applications    asl    mtl    tcpip    timesync     x25   
Enter Package to be installed:  applications
APM Status: ACTIVE
NEC America                 APM Administration                 Sat - Sep 11, 1999  
						

							NDA-30133 Revision 1.0Page 17
Conference 911 Installation Guide Installing the C911 Server Software
2. Type applications at the prompt and press Enter.
The “Enter Release Media Device” prompt is displayed: 
Figure 3-11   Release Media Device menu
3. Type F and press Enter to choose the Floppy Disk Device.
The Installation Procedure screen is displayed, prompting you to insert the 
Message Server installation diskette in the floppy disk device.
Figure 3-12   Insert Message Server Disk prompt
4. Insert the disk labeled “Message Server Version 3.0” into the floppy disk device 
and press Enter.
The screen displays the status of the application files as they are installed. 
  
Installation of Applications/Packages
Available Packages are:
applications    asl    mtl    tcpip    update     x25   
Enter Package to be installed:  applications
Release Media Devices are:
(F)loppy Disk Device(C)artridge Tape Device
Enter Release Media Device:  F
NEC America                 APM Administration                 Sat - Sep 11, 1999 
  
Installation Procedure
Installing from /dev/fd0
Insert OAI Release Media #1 
Enter  to continue: 
						

							Page 18NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Figure 3-13   Processing Message Server Installation Files
When all the files from the disk have been installed, the prompt “Has all the 
release media been loaded [y or n]?” is displayed.
5. Type y at the prompt and press Enter.
Figure 3-14   Root Password prompt
The prompt “Password” is displayed for you to enter the root (Super User) 
password. 
6. Type the root password and press Enter.
The APM installation procedures begin processing the Message Server 
installation files. 
  Installation Procedure
Installing from /dev/fd0
Insert OAI Release Media #1 
Enter  to continue:
Copying...
tar: block size = 20
x oai/app/msgserver/msgserver, 136780 bytes, 268 tape blocks
Has all release media been loaded? [y or n] ? y
x oai/app/msgserver/installmsgserver, 8468 bytes, 17 tape blocks
x oai/app/msgserver,I,1, 5631 bytes, 11 tape blocks
x oai/chksum_app, 113 bytes, 1 tape block
Message Server Installation
Installation requires Super User (root) password.
You will need the root password.
Password: 
						

							NDA-30133 Revision 1.0Page 19
Conference 911 Installation Guide Installing the C911 Server Software
Figure 3-15   Installing Message Server Files
The prompt “Press enter key to re-run /etc/inittab (using “init q” command), 
otherwise press CTRL-C.” is displayed. 
7. Press Enter.
The screen indicates the status of the installation as the installation files are 
processed. 
Note:If there is a problem with the files during the Message Server installation, the 
message “Validation error, OAI installation failed” is displayed.
Figure 3-16   Message Server Installation Complete prompt
When the installation is complete, “Message Server installation has completed 
successfully” is displayed. Then, “Please press Enter to return to APM 
Administration menu.” is displayed.
8. Press Enter. 
The APM Administration Main menu is displayed.
Press enter key to re-run /etc/inittab (using “init q” command), 
otherwise press CTRL-C.
Installing the Release Files
Message Server installation has completed successfully.
Please press Enter to return to APM Administration menu. 
						

							Page 20NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Installing the Beeper Interface
To install the Beeper Interface software, you must use a UNIX terminal to access the 
APM. (For more information about the general installation process, refer to the APM 
Operations Manual.)
Use the following steps to install the Beeper Interface software:
Figure 3-17   APM Administration Main menu
1. From the APM Administration Main menu, type i at the prompt and press Enter to 
choose the Installation of Applications/Packages option. 
The “Enter Package to be installed” prompt is displayed. 
Figure 3-18   Installation Applications/Packages menu
  
APM Platform Release   Rel3.1.2     (Feb 2, 1999)
Main Menu
APM
Debug Facilities
Halt APM System
File Archive
Installation of Applications/Packages
Configuration of UAP
Removal of Packages
Startup APM System
Manage Activation Keys
Logout
UNIX
Enter Option:  [i]
APM Status: ACTIVE
NEC America                 APM Administration                 Sat - Sep 11, 1999 
  
Installation of Applications/Packages
Available Packages are:
applications    asl    mtl    tcpip    timesync     x25   
Enter Package to be installed:  applications
APM Status: ACTIVE
NEC America                 APM Administration                 Sat - Sep 11, 1999  
						

							NDA-30133 Revision 1.0Page 21
Conference 911 Installation Guide Installing the C911 Server Software
2. Type applications at the prompt and press Enter.
The “Enter Release Media Device” prompt is displayed: 
Figure 3-19   Release Media Device menu
3. Type F and press Enter to choose the Floppy Disk Device.
The Installation Procedure screen is displayed, prompting you to insert the Beeper 
Interface installation diskette in the floppy disk device.
Figure 3-20   Insert Beeper Interface Disk prompt
4. Insert the disk labeled “Beeper Interface Version 3.3” into the floppy disk device 
and press Enter.
The screen displays the status of the application files as they are installed. 
  
Installation of Applications/Packages
Available Packages are:
applications    asl    mtl    tcpip    update     x25   
Enter Package to be installed:  applications
Release Media Devices are:
(F)loppy Disk Device(C)artridge Tape Device
Enter Release Media Device:  F
NEC America                 APM Administration                 Sat - Sep 11, 1999 
  
Installation Procedure
Installing from /dev/fd0
Insert OAI Release Media #1 
Enter  to continue: 
						

							Page 22NDA-30133 Revision 1.0
Installing the C911 Server Software Conference 911 Installation Guide
Figure 3-21   Processing Beeper Interface Installation Files
When all the files from the disk have been installed, the prompt “Has all the 
release media been loaded [y or n]?” is displayed.
5. Type y at the prompt and press Enter.
The APM installation procedures begin processing the Beeper Interface 
installation files. 
Figure 3-22   Beeper Pre-Install Script
The prompt “Would you like to upgrade? (y or n)” is displayed. 
Installation Procedure
Installing from /dev/fd0
Insert OAI Release Media #1 
Enter  to continue:
Copying...
tar: block size = 20
x oai/app/beeper/bin/beeper, 210876 bytes, 412 tape blocks
Has all release media been loaded? [y or n] ? y
x oai/app/beeper/bin/beeperq, 152065 bytes, 298 tape blocksx oai/app/beeper/cfg/config, 1145 bytes, 3 tape blocks
x oai/chksum_app, 483 bytes, 1 tape block
x oai/app/beeper/cfg/version, 11 bytes, 1 tape blocks
x oai/app/beeper/install/kprofile, 18670 bytes, 37 tape blocksx oai/app/beeper/install/bprins, 2935 bytes, 6 tape blocksx oai/app/beeper/install/installer, 5786 bytes, 12 tape blocksx oai/app/beeper/install/pkg.ini, 4680 bytes, 10 tape blocks
x oai/app/beeper/install/profile, 947 bytes, 2 tape blocksx oai/app/beeper/install/S98bpradmin, 676 bytes, 2 tape blocksx oai/app/beeper/cfg/varSplit, 140 bytes, 1 tape blockx oai/app/beeper/install/beeper.cfg, 933 bytes, 2 tape blocks
x oai/app/beeper.ins, 3521 bytes, 7 tape blocks
Beeper Pre-Install Script
Checking the system configuration.....
/oai/app/beeper/install/pkg.ini [113]: test: --Option requires an argument
Would you like to upgrade? (y or n)