Home > NEC > Communications System > NEC Conference 911 Installation Guide

NEC Conference 911 Installation Guide

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Conference 911 Installation Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							NDA-30133 Revision 1.0Page C-1
    Conference 911 Installation Guide Glossary
    Appendix C Glossary
    911
    The slogan for the United States is “One Nation, One Number” and “911” is that 
    number. The goal is to be able to dial 911 from anywhere in the United States to 
    request emergency service.
    APM
    Applications Manager. The support platform or software which resides on the UAP 
    and provides the user with management capabilities within the Open Applications 
    Interface system.
    Beeper Interface
    The device that will broadcast encoded information over radio frequencies to 
    receiving devices that can decode these transmissions.
    Conference Call
    Connects two callers and an agent into a 3-way conversation; adds or rings a third 
    party after two parties are in conversation. 
    Full Capcode Paging
    A paging mode that allows the signaling of a beeper device by its pager address 
    (capcode and function digit).
    IP
    Interface processor. A module within the NEAX2400 which services the OAI 
    system.
    IPC 
    Interprocess communication. A method used by one UNIX application process to 
    inform another UNIX application process within the same discrete device.
    My Line
    Refers to the physical station used by a caller to make a call or answer a call, as 
    opposed to one of the sublines that could be used for a call. The MyLine is very 
    important because C911 needs to know the physical location of the caller, not what 
    line was used. A line (subline, virtual,.) could be on several different phones in 
    several different areas and would not help in knowing the origin of the call. 
    NENA
    National Emergency Number Association
    OAI
    Open Applications Interface. A proprietary protocol and set of routines that links 
    the NEAX2400 to a UAP. Programs executing on the UAP are able to monitor and 
    control switch features and telephones.
    UAP 
    User Application Processor. General purpose multi-tasking computer supporting 
    System V UNIX and the Applications Manager running OAI. 
    						
    							Glossary Conference 911 Installation Guide
    Page C-2NDA-30133 Revision 1.0
    This Page Left Blank. 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Conference 911 Installation Guide