NEC Neax 2400 Ipx Office Data Specification

NDA-24298 CHAPTER 4
Page 277
Issue 1
ANNDL : Assignment of Necessary Digits Data for LDM
4. Data Sheet
LOGICAL
ROUTE 
NUMBER 
(LGRT)INCOMING/
OUTGOING 
CALL
 (IC/OG) 
I/ONUMBER OF 
NECESSARY 
DIGITS 
(NND)
1 – 24REMARKSLOGICAL
ROUTE 
NUMBER 
(LGRT)INCOMING/
OUTGOING 
CALL
 (IC/OG) 
I/ONUMBER OF 
NECESSARY 
DIGITS 
(NND) 
1 – 24REMARKS 

CHAPTER 4 NDA-24298
Page 278
Issue 1
ASTP : Assignment of Signal Translation Pattern
ASTP: Assignment of Signal Translation Pattern
1. General
This command assigns the Incoming/Outgoing Selection Translation Pattern Number (PNI/PNO) for the
incoming or outgoing trunk route.
2. Precautions
1. The PNI/PNO is an intermediate parameter to assign an additional number (and skip digits) by the AISP/
AOSP command.
(a) When IC/OG = 1 (Incoming) is entered, the additional number is assigned by the AISP command....

NDA-24298 CHAPTER 4
Page 279
Issue 1
ASTP : Assignment of Signal Translation Pattern
3. Data Entry Instructions
PNI appears when IC/OG=I is entered. Enter any number with
a range from 1 to 15.  I=Incoming
O=OutgoingPNI
IC/OG
KIND OF
ASSIGNMENT
(IC/OG)
I/OTENANT
NUMBER
(TN)ROUTE
NUMBER
(RT)INCOMING SELECTION
TRANSLATION
PATTERN NUMBER
(PNI)
1-15OUTGOING SELECTION
TRANSLATION
PATTERN NUMBER
(PNO)
1-15
pnip
PNO
I1001 1
PNO is appeared when IC/OG=O is entered. Enter any number
with a range from 1 to 15.
PNO 

CHAPTER 4 NDA-24298
Page 280
Issue 1
ASTP : Assignment of Signal Translation Pattern
4. Data Sheet
(a) Incoming
KIND OF 
ASSIGNMENT
(IC/OG)
1/2TENANT
NUMBER
(TN)ROUTE
NUMBER
(RT)INCOMING
SELECTION 
TRANSLATION
PAT T E R N
NUMBER 
(PNI)
1 – 15REMARKS
1 

NDA-24298 CHAPTER 4
Page 281
Issue 1
ASTP : Assignment of Signal Translation Pattern
(b) Outgoing
KIND OF
ASSIGNMENT
(IC/OG)
1/2TENANT
NUMBER
(TN)ROUTE
NUMBER
(RT)OUTGOING 
SELECTION 
TRANSLATION 
PAT T E R N
NUMBER 
(PNO)
1 – 15REMARKS
2 

CHAPTER 4 NDA-24298
Page 282
Issue 1
ASTPL : Assignment of Signal Translation Pattern for LDM
ASTPL: Assignment of Signal Translation Pattern for LDM
1. General
This command assigns the Incoming/Outgoing Selection Translation Pattern Number (PNI/PNO) for incoming
or outgoing trunk route. This data is written in Local Data Memory (LDM).
2. Precautions
1. The PNI/PNO is an intermediate parameter to assign additional number (and skip digits) by the AISPL/
AOSPL command.
(a) When IC/OG=I (Incoming) is...

NDA-24298 CHAPTER 4
Page 283
Issue 1
ASTPL : Assignment of Signal Translation Pattern for LDM
4. Data Sheet
(a) Incoming
KIND OF 
ASSIGNMENT
(IC/OG)
I/OTENANT
NUMBER
(TN)LOGICAL
ROUTE
NUMBER
(LGRT)
1-899INCOMING
SELECTION 
TRANSLATION
PAT T E R N
NUMBER (PNI)
1 – 15REMARKS
I 

CHAPTER 4 NDA-24298
Page 284
Issue 1
ASTPL : Assignment of Signal Translation Pattern for LDM
(b) Outgoing
KIND OF
ASSIGNMENT
(IC/OG)
I/OTENANT
NUMBER
(TN)LOGICAL
ROUTE
NUMBER
(LGRT)
1-899OUTGOING 
SELECTION 
TRANSLATION 
PAT T E R N
NUMBER (PNO)
1 – 15REMARKS
O 

NDA-24298 CHAPTER 4
Page 285
Issue 1
ASTPN : Assignment of Signal Translation Pattern for NDM
ASTPN: Assignment of Signal Translation Pattern for NDM
1. General
This command assigns the Incoming/Outgoing Selection Translation Pattern Number (PNI/PNO) for incoming
or outgoing trunk route in Fusion Network. The data assigned by this command is written in the Network Data
Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node (LN).
2. Precautions
1. The PNI/PNO is an...

CHAPTER 4 NDA-24298
Page 286
Issue 1
ASTPN : Assignment of Signal Translation Pattern for NDM
3. Data Entry Instructions
PNI appears when IC/OG=I is entered. Enter any number with
a range from 1 to 15.  I=Incoming
O=OutgoingPNI
IC/OG
KIND OF
ASSIGNMENT
(IC/OG)
I/OTENANT
NUMBER
(TN)LOGICAL 
ROUTE
NUMBER 
(LGRT) 
1-899INCOMING SELECTION
TRANSLATION
PATTERN NUMBER
(PNI)
1-15OUTGOING SELECTION
TRANSLATION
PATTERN NUMBER
(PNO)
1-15
pnip
PNO
I1001 1
PNO appears when IC/OG=O is entered. Enter any number
with a...