CREATING CONTACT RECORD
For each contact record, complete the fields listed below. Only fields with the
Name and Telephone number have to be completed:
•TEL and fax number of contact,
•E-mail address, example: [email protected],
•FTP address, example: 220.127.116.11
Remark : If you have not entered an e-mail address, then you have the possibility of
entering an FTP address (for archiving purposes).
•FORMAT: by default, the attachment is PDF or Image (.tiff or .jpeg)
•RECORD NUMBER: this number is automatically allocated by the fax (you can, nonethe-
less, modify it). It gives you quick access to the directory,
•RATE send fax you can choose for each contact the minimum send rate for faxes you
send to him. Available rates are 2400, 4800, 7200, 9600, 12000, 14400 and 33600 bits
per second. The maximum speed can be used if the telephone line is of good quality,
meaning appropriate, without echo.
Remark : If a contact has the two fields TEL and E-MAIL completed, the validation
key ( or ) will define whether the document is sent by telephone
network or via the internet.
ADDING A RECORD
11 OK - DIRECTORY / NEW CONTACT
+Your fax has just created a new record, fill in it by first entering your contact’s
name then validate with OK.
Remark : you can stop the list creation at any time by pressing .
+Enter the person’s fax number1 and press OK to confirm.
To associate an e-mail address:
+Enter the E-Mail address of your contact and press OK to confirm.
+Define the attachment format (Image or PDF) OK.
+Your contact’s ID number will automatically appear on the screen, if you wish
to modify this number you may do so by choosing another free number and
validate with OK.
1. If your terminal is connected to a PABX, you may need to insert a pause for dial tone (symbo-
lised by the sign / in the number) except if a local prefix is already programmed (see §
Downloaded From ManualsPrinter.com Manuals