Panasonic Digital Camera Dmc Gx8 Owners Manual For Advanced Features

							391
13. Others
•Is the camera connected to the TV correctly? (P334)
> Set the TV input to external input mode.
•Check [TV Aspect] setting.  (P80)•Depending on the TV model, the pi ctures may be extended horizontally or vertically or they 
may be displayed with their edges cut off.
•Are you trying to play back the motion pictures by directly ins erting the card in the card slot of 
the TV? > Connect the camera to the TV with the AV  cable (optional), or w ith the HDMI micro cable, 
and then play back the motion pictures on the camera.  (P334)
•When an AV cable (optional) or an HDMI micro cable is connected , sound is not output from the 
camera.
•Is it connected properly with the HDMI micro cable?  (P334)•Is the [VIERA Link] on this unit set to [ON]? (P81)
> If the input channel does not switch automatically, use the rem ote control for the TV to 
switch it.
> Check the VIERA Link setting on the connected device.
> Turn this unit off and on.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to  [On].
(Refer to the operating instructions of the TV for details.)
•Is the camera recognized by the PC correctly? > Set to [PC] in [USB Mode].  (P79, 341)
> Turn this unit off and on.
TV, PC and printer
The picture does not appear on the television.
The picture is not displayed fully on the TV.
The display areas on the TV screen and the camera’s monitor are  different.
The motion pictures cannot be played back on a TV.
Sound is not output from the speaker of the camera.
VIERA Link does not work.
Cannot communicate with the PC. 
						

							13. Others
392
•Disconnect the USB connection cable. Connect it again while the card is inserted in the 
camera.
•If there are two or more USB terminal on a single PC, try conne cting the USB connection cable 
to another USB terminal.
•Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
•A message prompting to format the card may be displayed when co nnecting, but do not format.
•If the [Access] displayed on the monitor does not disappear, disconnect the USB connection 
cable after turning this unit off.
•Pictures cannot be printed using a printer that does not suppor t PictBridge.
> Set to [PictBridge(PTP)] in [USB Mode].  (P79, 344)
•When using a printer with a Cropping or borderless printing function, cancel this function before 
printing.
(For details, refer to the operating instructions for the print er.)
•When you order photo studios to print pictures, ask the photo s tudio if the 16:9 pictures can be 
printed.
•Since aspect ratio of a panorama picture differs from normal pi ctures, it may not always be 
possible to print it correctly.
> Please use a printer that supports panorama pictures.
(For details, please see the operating instructions of your pri nter.)
> We recommend using the “ PHOTOfunSTUDIO ” software on the DVD (su pplied) to adjust 
the size of the still picture to the print paper size.
•Depending on the lens you attach, it may move inside and create  a sound. This is not a 
malfunction.
•This is the noise of the Dust Reduction Function working  (P395); it is not a malfunction.
The card is not recognized by the PC.
The card is not recognized by the PC.
(SDXC memory card is used.)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly.
Others
When I shake the camera, I hear a rattling sound from the attac hed lens.
The camera makes a noise when this unit is turned on. 
						

							393
13. Others
•It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is 
not a malfunction.
•The sound, which is caused by the automatic adjustment of the a perture, is heard when the 
brightness has changed due to, for example, zooming or the move ment of the camera. This is 
not a malfunction. 
•Press [MENU/SET], select the [Setup] menu icon [ ] and then sele ct the [~] icon to set the 
desired language.  (P82)
•This is a highlight function showing the white saturated area.  (P58)
•In dark places, the AF Assist Lamp (P156) lights red to make it easier to focus on a subject.
•Is [AF Assist Lamp] set to [ON]? (P156)•The AF Assist Lamp does not turn on in bright places.
•The surface of the camera and the reverse side of the monitor m ay become warm during use. 
This does not affect the performance or quality of the camera.
•If you do not use the camera for a long time, the clock may be  reset.
> [Please set the clock] message  will be displayed; please reset  the clock. (P40)
•When you perform an operation after taking a certain action, th e pictures may be recorded in 
folders with different numbers from the ones used prior to the  operation.
•If you insert or remove the battery before turning off this unit, the folder and file numbers for the 
pictures taken will not be stored in the memory. When this unit  is turned on again and pictures 
are taken, they may be stored under file numbers which should h ave been assigned to 
previous pictures.
There is a sound from lens unit.
An unreadable language was selected by mistake.
Part of the picture is flashing in black and white.
A red lamp sometimes turns on when the shutter button is presse d halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The clock is reset.
The file numbers are not recorded consecutively.
The file numbers are recorded with previously used numbers. 
						

							13. Others
394
Cautions for Use
Keep this unit as far away as possible from electromagnetic equipment (such as 
microwave ovens, TVs, video games etc.).
•
If you use this unit on top of or near a TV, the pictures and/o r sound on this unit may be 
disrupted by electromagnetic wave radiation.
•Do not use this unit near cell phones because doing so may resu lt in noise adversely affecting 
the pictures and/or sound.
•Recorded data may be damaged, or pictures may be distorted, by  strong magnetic fields 
created by speakers or large motors.
•Electromagnetic wave radiation may adversely affect this unit,  disturbing the pictures and/or 
sound.
•If this unit is adversely affected by electromagnetic equipment  and stops functioning properly, 
turn this unit off and remove the battery or disconnect AC adap tor (optional). Then reinsert the 
battery or reconnect AC adaptor and turn this unit on.
Do not use this unit near radio transmitters or high-voltage li nes.
•If you record near radio transmitters or high-voltage lines, th e recorded pictures and/or sound 
may be adversely affected.
Always use the supplied cords and cables.
If you use optional accessories, use the cords and the cables s upplied with them.
Do not extend the cords or the cables.
Do not spray the camera with insecticides or volatile chemicals.
•
If the camera is sprayed with such chemicals, the body of the c amera may be damaged and the 
surface finish may peel off.
Do not keep rubber or plastic products in contact with the came ra for a long period 
of time.
Optimal use of the camera 
						

							395
13. Others
Before cleaning the camera, remove the battery or the DC coupler (optional), or 
disconnect the power plug from the outlet. Then wipe the camera with a dry, soft 
cloth.
•
When the camera is soiled badly, it can be cleaned by wiping th e dirt off with a wrung wet cloth, 
and then with a dry cloth.
•Wipe off any dirt or dust on the zoom ring and the focus ring w ith a dry, dustless cloth.•Do not use solvents such as benzine, thinner, alcohol, kitchen  detergents, etc., to clean the 
camera, since it may deteriorate the external case or the coati ng may peel off.
•When using a chemical cloth, be sure to follow the accompanying  instructions.
∫About dirt on the image sensor
This camera features an interchangeable lens system so dirt may get inside the camera 
body when changing lenses. Depending on the recording conditions, dirt on the image 
sensor may appear on the recorded picture.
To prevent debris or dust adhering to internal parts of the bod y, avoid changing the lens in 
a dusty environment and always fit the body cap or a lens when  storing the camera. 
Remove any dirt on the body cap before attaching it.
Removing dirt on the image sensor
The image sensor is very precise and delicate, so be sure to ob serve the following when 
you do have to clean it yourself.
•
Blow off the dust on the surface of the im age sensor with a commercially available blower 
brush. Be careful not to blow too strongly.
•Do not put the blower brush further inside than the lens mount.
•Do not let the blower brush touch the image sensor as the image  sensor may get scratched.•Do not use any objects except a blower brush to clean the image  sensor.•If you cannot remove the dirt or dust with the blower, consult the dealer or Panasonic.
Cleaning
Dust reduction function
This unit has a dust reduction function that will blow off the debris and dust that have 
affixed to the front of the imaging device.
This function will function automatically when the camera is turned on, but if you see 
dust, perform the [Sensor Cleaning]  (P83) in the [Setup] menu. 
						

							13. Others
396
∫For care of the viewfinder/Eyecup
•
Do not press the monitor with excessive force. Uneven colors ma y appear on the monitor and it 
may malfunction.
•If the camera is cold when you turn it on, the picture on the M onitor/Viewfinder will be slightly 
darker than usual at first. However, the picture will return to normal brightness when the internal 
temperature of the camera increases.
•Do not press the lens with excessive force.•Do not leave the camera with the lens facing the sun as rays of  light from the sun may cause it 
to malfunction. Also, be careful when placing the camera outsid e or near a window.
•When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the picture may 
be affected. Lightly wipe the surface of the lens with a soft,  dry cloth before and after taking 
pictures.
•Do not place the lens mount facing downwards. Do not allow the  lens 
mount contacts  A to become dirty.
•To improve the dust- and splash-proof performance, the mount of the 
interchangeable lens (H-HS12035) is embedded with the lens moun t 
rubber. If you change the lens repeatedly, friction with the le ns mount 
rubber may leave scratches on the camera’s mount. However, thos e 
scratches do not affect the performance of this unit. For the 
replacement of the lens mount rubber, contact Panasonic.
•Before you remove stains on the viewfinder 
and Eyecup or start other types of cleaning, 
remove the Eyecup. Blow away the dust on 
the viewfinder surface with a blower 
(commercially available), and wipe the 
surface lightly with a dry, soft cloth. Attach the 
Eyecup after the cleaning.
•Be careful not to lose the Eyecup.•Keep the Eyecup out of reach of children to 
prevent swallowing.
About the Monitor/Viewfinder
Extremely high precision technology is employed to produce the  Monitor/
Viewfinder screen. However there may be some dark or bright spo ts (red, blue or 
green) on the screen. This is not a malfunction. Though the Mon itor/Viewfinder 
screen parts are produced with highly controlled precision tech nology, some 
pixels may be inactive or always lit. The spots will not be rec orded on pictures 
on a card.
About the Lens 
						

							397
13. Others
The battery is a rechargeable lithium ion battery. Its ability to generate power comes 
from the chemical reaction that takes place inside it. This reaction is susceptible to 
the surrounding temperature and humidity. If the temperature is too high or too low, 
the operating time of the battery will become shorter.
Always remove the battery after use.
•
Place the removed battery in a plastic bag, and store or keep a way from metallic objects (clips, 
etc.).
If you drop the battery accidentally, check to see if the body  of the battery and the 
terminals are damaged.
•
Inserting a damaged battery in the camera will damage the camer a.
Bring charged spare batteries when going out.
•Be aware that the operating time of the battery becomes shorter in low temperature conditions 
such as at a ski resort.
•When you travel, do not forget to bring the battery charger (su pplied) so that you can charge 
the battery in the country that you are traveling in.
Dispose of unusable battery.
•The battery has a limited life.
•Do not throw the battery into fire because it may cause an expl osion.•The unusable battery should be discarded in accordance with bat tery recycling laws. Call the 
RBRC hotline at 1-800-822-8837 for information.
Do not allow battery terminals to come into contact with metal  objects (such as 
necklaces, hairpins, etc.).
•
This can cause short-circuiting or heat generation and you may  be badly burned if you touch a 
battery.
•The [CHARGE] indicator may blink under the influence of static  electricity or electromagnetic 
wave. This phenomenon has no effects on charging.
•If you use the battery charger near a radio, the radio receptio n may be disturbed.
Keep the charger 1 m (3.3 feet) or more away from radio.
•The charger may generate whirring sounds when it is being used.  This is not a malfunction.•After use, be sure to disconnect the power supply device from the electrical outlet.
(A very small amount of current is consumed if it is left connected.)
•Keep the terminals of the charger and battery clean.
Battery
Charger 
						

							13. Others
398
∫About 3D recording
With the 3D interchangeable lens attached, do not record a subj ect at less than the 
minimum focus distance.
•
The 3D effects may be more pronounced, and therefore cause tiredness or discomfort.•When the 3D interchangeable lens (H-FT012: optional) is used, t he minimum focus distance is 
0.6 m (2.0 feet).
When recording with the 3D interchangeable lens attached, be ca reful not to shake 
the unit.
•
Tiredness or discomfort may result if the shake is pronounced,  due to riding in a vehicle or 
walking etc.
•We recommend using a tripod.
Do not leave the card where the temperature is high, where electromagnetic waves 
or static electricity are easily generated or exposed to direct  sunlight.
Do not bend or drop the card.
•
The card may be damaged or the recorded content may be damaged  or deleted.•Put the card in the card case or the storage bag after use and when storing or carrying the 
card.
•Do not allow dirt, dust, or water to get into the terminals on  the back of the card and do not 
touch the terminals with your fingers.
Notice for when transferring to another party, or disposing of  the memory card
“Format” or “delete” using the camera or a PC will only modify  the file management 
information, it will not erase the data in the memory card comp letely.
It is recommended to physically destroy the memory card or use  the commercially 
available computer data deletion software to completely erase the data in the 
memory card before transferring to another party or disposing.
Management of data in the memory card is the responsibility of  the user.
About 3D
Card 
						

							399
13. Others
If a name or birthday is set for [Profile Setup]/Face Recognition function, this personal 
information is kept in the camera and recorded in the image.
We recommend that you enable [Wi-Fi Password] and [Wi-Fi Function Lock] to protect 
personal information.  (P330 , 331)
Disclaimer
•
Information including personal information may be altered or va nish due to erroneous 
operation, effect of static electricity, accident, malfunction, repair, or other handlings.
Please note in advance that Panasonic is not liable in any way  for any direct or indirect damage 
from the alteration or vanishing of information or personal inf ormation.
When requesting a repair, transferring to another party, or disposing.
•After making a copy of personal information, always delete information such as personal 
information and wireless LAN connection settings that you have  saved within the camera with 
[Reset Wi-Fi Settings]/[Delete account]  (P83, 323) .
•Reset the settings to protect the personal information.  (P82)•Remove the memory card from the camera when requesting a repair .•Settings may return to factory default when camera is repaired.
•Please contact the dealer where you purchased the camera or Panasonic if above operations 
are not possible due to malfunction.
When transferring to another party, or disposing of the memory card, please refer to 
“Notice for when transferring to another party, or disposing of  the memory card”. 
(P398)
When uploading images on web services
•
Images may contain information that can be used for identifying  individuals such as titles, 
recording dates, and location information. When uploading image s on web services, check 
carefully, and then upload.
•Store the battery in a cool and dry place with a relatively sta ble temperature: [Recommended 
temperature: 15 oC to 25 oC (59  oF to 77  oF), Recommended humidity: 40%RH to 60%RH]
•Always remove the battery and the card from the camera.•If the battery is left inserted in the camera, it will discharg e even if the camera is turned off. If 
the battery continues to be left in the camera, it will dischar ge excessively and may become 
unusable even if charged.
•When storing the battery for a long period of time, we recommen d charging it once a year. 
Remove the battery from the camera and store it again after it  has completely discharged.
•We recommend storing the camera with a desiccant (silica gel) w hen you keep it in a closet or 
a cabinet.
•Check all the parts before taking pictures when you have not us ed the camera for a long period 
of time.
About the personal information
When not using the camera for a long period of time 
						

							13. Others
400
•Recorded data may be damaged or lost if the camera breaks down due to inappropriate 
handling. Panasonic will not be liable for any damage caused du e to loss of recorded data.
•When you use a tripod, make sure the tripod is stable when this unit is attached to it.•You may not be able to remove the card or the battery when using a tripod or unipod.
•Make sure that the screw on the tripod or unipod is not at an angle when attaching or detaching 
the camera. You may damage the screw on the camera if you use e xcessive force when 
turning it. Also, the camera body and the rating label may be damaged or scratched if the 
camera is attached too tightly to the tripod or unipod.
•When using this unit with a large-diameter lens, the lens may come into contact with the 
pedestal depending on the tripod/unipod. Tightening the screw w ith the lens and pedestal in 
contact with each other may damage this unit or the lens. There fore it is recommended to 
attach the tripod adaptor (DMW-TA1: optional) before mounting o n the tripod/unipod.
•Read the operating instructions for the tripod or unipod carefully.
•If you attach a heavy interchangeable lens (more than about 1 k g/35.3 oz) to the camera body, 
do not carry the camera by the shoulder strap.
Hold the camera and the lens when carrying them.
∫ Use the camera as a wireless LAN device
When using equipment or computer systems that require more reliable security than 
wireless LAN devices, ensure t hat the appropriate measures are  taken for safety designs 
and defects for the systems used. Panasonic will not take any r esponsibility for any 
damage that arises when using the camera for any purpose other than as a wireless LAN 
device.
∫ Use of the Wi-Fi function of this camera is presumed to be in c ountries where this 
camera is sold
There is the risk that the camera violates the radiowave regula tions if used in countries 
other than those where this camera is sold, and Panasonic takes  no responsibility for any 
violations.
∫ There is the risk that data sent and received via radio waves may be intercepted
Please note that there is the risk that data sent and received  via radio waves may be 
intercepted by a third party.
About the picture data
About tripods or unipods
About the shoulder strap
Wi-Fi function