Panasonic Digital Camera Dmc Zs50 Owners Manual For Advanced Features

							Application (View)
Using the [Playback] menuSQW0195
- 181 -
 • For the setting procedures of the menu.  (→61)
[Resize]
Picture size can be reduced to facilitate e-mail attachment and use in web pages, etc.
(Still pictures recorded at the smallest recording pixel level cannot be further reduced.)
 ■[SINGLE]
Use   to select [SINGLE] and press [MENU/SET]
Use   to select a still picture and press [MENU/SET]
Use   to select size and press [MENU/SET]
Current size
Size after change
 • Confirmation screen is displayed. If you select [Yes], the operation is executed.
(Continued on the next page)    
						

							Application (View)
Using the [Playback] menuSQW0195
- 182 -
 ■[MULTI]
Use   to select [MULTI] and press [MENU/SET]
Use   to select size and press [MENU/SET]
Use     to select a still picture and press [DISP.] button 
(up to 100 pictures)
Number of pixels before/after 
resizing
Resize setting • To cancel  → Press [DISP .] button again.
 • To execute  
→ Press [MENU/SET].
 • Confirmation screen is displayed. If you select [Yes], the operation is executed.
 ●Picture quality is reduced after resizing. ●Cannot resize the following pictures. • Motion pictures • 3D still pictures • Panorama pictures • Still pictures that date or other texts had already been stamped • Still pictures recorded with the [Quality] setting [  ], [  ] or [  ]    
						

							Application (View)
Using the [Playback] menuSQW0195
- 183 -
 • For the setting procedures of the menu.  (→61)
[Cropping]
Enlarge your still pictures and crop unwanted areas.
Use   to select a still picture and press [MENU/SET]
Select area to crop and press [MENU/SET]
Expand Change position
 • Confirmation screen is displayed. If you select [Yes], the operation is executed. • You can also enlarge the still picture with the control dial.
 ●Original Face Recognition information will not be copied when still pictures are 
cropped.
 ●Picture quality is reduced after cropping. ●Cannot crop the following pictures. • Motion pictures • 3D still pictures • Panorama pictures • Still pictures that date or other texts had already been stamped • Still pictures recorded with the [Quality] setting [  ], [  ] or [  ]    
						

							Application (View)
Using the [Playback] menuSQW0195
- 184 -
 • For the setting procedures of the menu.  (→61)
[Favorite]
By labeling your favorite pictures with a star (
), you can play back your favorite pictures 
only, or you can delete all pictures except your favorites. Up to 999 pictures can be set as 
favorites.
Use   to select [SINGLE] or [MULTI] and press [MENU/SET]
Use     to select picture and press [MENU/SET]
 ●[SINGLE]
Favorite picture setting
 ●[MULTI]
Favorite picture setting
 • To cancel → Press [MENU/SET] again.
 ■To clear all
Select [CANCEL] in step 
 and select [Yes], and then press [MENU/SET]
 ●You cannot select the [Favorite] setting for still pictures recorded with the [Quality] 
setting [  ].    
						

							Application (View)
Using the [Playback] menuSQW0195
- 185 -
 • For the setting procedures of the menu.  (→61)
[Print Set]
Picture/picture no./date printing settings can be made for when printing with DPOF print-
compatible shops or printers. (Ask at the shop to check for compatibility .)
For more information visit: 
http://panasonic.jp/dc/dpof_110/white_e.htm
Use   to select [SINGLE] or [MULTI] and press [MENU/SET]
Use     to select picture and press [MENU/SET]
Use   to set number of pictures and press [MENU/SET]
(Repeat steps  and  when using [MULTI] (up to 999 pictures))
 ●[SINGLE]
Date print set
No. to print
 ●[MULTI]
Date print set
No. to print
 • Date print setting/release → Press [DISP.] button.
 ■To clear all
Select [CANCEL] in step 
 and select [Yes], and then press [MENU/SET]
 ●Date print setting cannot be made for still pictures that have been taken with [Date 
Stamp] and pictures with a [Text Stamp] applied.
 ●Depending on the type of printer, the printer settings may take priority over camera 
settings.
 ●Cannot be set for files that are not compliant with the DCF standard. ●Some DPOF information set by other equipment cannot be used. In such cases, 
delete all of the DPOF information and then set it again with this camera.
 ●Print setting cannot be made for motion pictures. ●You cannot select the [Print Set] setting for still pictures recorded with the [Quality] 
setting [  ].    
						

							Application (View)
Using the [Playback] menuSQW0195
- 186 -
 • For the setting procedures of the menu.  (→61)
[Protect]
Set protection to disable picture deletion. Prevents deletion of important pictures.
Use   to select [SINGLE] or [MULTI] and press [MENU/SET]
Use     to select picture and press [MENU/SET]
 ●[SINGLE]
Picture protected
 ●[MULTI]
Picture protected
 • To cancel → Press [MENU/SET] again.
 ■To clear all
Select [CANCEL] in step 
 and select [Yes], and then press [MENU/SET]
 ●The picture is erased when formatting, even if it is protected. ●May not be effective when using other devices. ●When you set the write-protect switch on the card to the “LOCK” position, the picture 
is not erased.    
						

							Application (View)
Using the [Playback] menuSQW0195
- 187 -
 • For the setting procedures of the menu.  (→61)
[Face Rec Edit]
Edit or delete the recognition information for pictures with mistaken Face Recognition.
Use   to select [REPLACE] or [DELETE] and press 
[MENU/SET]
Use   to select picture and press [MENU/SET]
Use   to select a person and press [MENU/SET]
 • If [DELETE], go to step . • People whose Face Recognition information has not been registered cannot be 
selected.
Use     to select the person to replace for another and 
press [MENU/SET]
Use  to select [Yes] and press [MENU/SET]
 ●When Face Recognition information is deleted, it cannot be restored. ●Pictures for which all Face Recognition information has been deleted are not 
categorized in Face Recognition during [Category Selection].
 ●Recognition information cannot be edited in protected pictures.    
						

							Application (View)
Using the [Playback] menuSQW0195
- 188 -
 • For the setting procedures of the menu.  (→61)
[Copy]
You can copy pictures between built-in memory and memory card.
Use   to select the copy method (direction) and press 
[MENU/SET]
:  Copy all pictures from built-in memory to card (go to step ).:  Copy 1 picture at a time from card to built-in memory .
Use   to select picture and press [MENU/SET]
Use  to select [Yes] and press [MENU/SET]
 • To cancel → Press [MENU/SET].
 ●Copying pictures may take several minutes. Do not turn off the camera or perform 
other operations during copying.
 ●If identical names (folder/file numbers) are present in the copy destination, a new 
folder for copying will be created when copying from built-in memory to card ([  ]). 
Identically-named files will not be copied from card to built-in memory ([  ]). ●The following settings are not copied. Set them again after copying. • [Print Set]    • [Protect]     • [Favorite]
 ●Only pictures from Panasonic digital cameras (LUMIX) may be copied. ●Motion pictures recorded in [AVCHD] format cannot be copied.    
						

							Wi-Fi/NFC
Wi-Fi® Function and NFC Function
SQW0195- 189 -
Wi-Fi/NFC
 ■Use the camera as a wireless LAN device
When using equipment or computer systems that require more reliable security than 
wireless LAN devices, ensure that the appropriate measures are taken for safety 
designs and defects for the systems used. 
Panasonic will not take any responsibility for any damage that arises when using the 
camera for any purpose other than as a wireless LAN device.
 ■Use of the Wi-Fi function of this camera is presumed to be in countries 
where this camera is sold
There is the risk that the camera violates the radiowave regulations if used in countries 
other than those where this camera is sold, and Panasonic takes no responsibility for 
any violations.
 ■There is the risk that data sent and received via radio waves may be 
intercepted
Please note that there is the risk that data sent and received via radio waves may be 
intercepted by a third party.
We strongly recommend that you enable encryption in the settings of your wireless 
access point to ensure information security.
 ■Do not use the camera in areas with magnetic fields, static electricity or 
interference
 • Do not use the camera in areas with magnetic fields, static electricity or interference, such as near microwave ovens. Radio waves may not reach the camera.
 • Using the camera near devices such as microwave ovens or cordless telephones that use the 2.4 GHz radio wave band may cause a decrease in performance in both 
devices.
 ■Do not connect to the wireless network you are not authorized to use
When the camera utilizes its Wi-Fi function, wireless networks will be searched 
automatically. When this happens, wireless networks that you are not authorized to use 
(SSID *
) may be displayed, however do not attempt to connect to the network as it may 
be considered as unauthorized access.
*
  SSID refers to the name that is used to identify a network over a wireless LAN con nection. If the 
SSID matches for both devices, transmission is possible.
 ■Before Use
 • Complete the date and time settings in advance.  (→28) • To use the Wi-Fi function on this unit, a wireless access point or a destination device 
equipped with the wireless LAN function is required.
 ■The camera is compatible with NFC
Using the NFC (Near Field Communication) function, the 
camera and a smartphone/tablet can easily exchange the 
information needed to establish a Wi-Fi connection.    
						

							Wi-Fi/NFC
Wi-Fi® Function and NFC FunctionSQW0195
- 190 -
 ■About the Wi-Fi connection lamp
Wi-Fi connection lamp
Lit blue:  When the Wi-Fi function is ON
Blinking blue:  When sending data
 ■About the [Wi-Fi] button
 ●If you press the [Wi-Fi] button before a Wi-Fi connection is established, you can 
connect a smartphone/tablet directly to this unit.  (→194)
At this time, if you press the [DISP.] button, you can perform the following operations.
[New Connection]
[History Connection]  (→254)
[Favorite Connection]  (→254)
[Wi-Fi Setup] (→259)
 ●Pressing the [Wi-Fi] button during a Wi-Fi connection enables the following operation.   
When connected using [Remote Shooting & View], a guide explaining how to 
terminate the Wi-Fi connection is displayed.
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination] Terminates the Wi-Fi connection, and allows you to select 
a different Wi-Fi connection.
[Change Settings for Sending 
Images]
*For details (→258).
[Register the Current Destination to 
Favorite] Registering the current connection destination or the 
connection method, you can easily connect with the 
same connection method next time.
[Network Address] Displays the MAC address and IP address of this unit. 
(→260)
*  This item will not be displayed if the destination for [Playback on 
TV] or [Send Images Stored in the 
Camera] is set to [Printer].