Panasonic Digital Camera Dmc Zs50 Owners Manual For Advanced Features

							Wi-Fi/NFC
Using “LUMIX CLUB”SQW0195
- 241 -
 ■Delete your login ID and account from the “LUMIX CLUB”
Delete the login ID from the camera when transferring it to another party or disposing of 
it. You can also delete your “LUMIX CLUB” account.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [LUMIX CLUB], and press  
[MENU/SET]
Select [Delete account]
 • The message is displayed. Select [Next].
Select [Yes] in the login ID delete confirmation screen
 • The message is displayed. Select [Next].
Select [Yes] on the confirmation screen for deleting the 
“LUMIX CLUB” account
 • If you want to continue using the service, selecting [No] will only delete the login ID. Exit the menu after it is executed.
Select [Next]
 • The login ID is deleted, and then the message notifying the deletion of your account is displayed. Select [OK].
 • Exit the menu after it is executed.
 ●Changes and other actions to login IDs can only be made to the login ID acquired with 
the camera.    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]SQW0195
- 242 -
[Smart Transfer] automatically transfers pictures from your camera to your PC, AV 
equipment or Cloud Folder. [Auto Transfer] automatically transfers pictures while charging 
the camera, and [Transfer Now] transfers the recorded pictures immediately.




AC adaptor
(supplied)
PC  [Auto Transfer] 
set to [ON]
  Recording PC
AV device
W
eb services,  
Cloud Folder
  Charging  Start 
transferring
Example: [Auto Transfer]
USB connection cable 
(supplied)
Pictures that can be sent with [Smart Transfer].
JPEG RAW MP4 AVCHD*3D
[Destination] [PC]
○ ○ ○ ○ ○
[Cloud Sync. Service] ○ – ○ – ○
[AV device] ○ – – – ○
*  Motion pictures recorded in [AVCHD] can  be sent in file sizes of up to 4 GB. Files larger than 4 GB 
cannot be sent.
 • You cannot use [Smart Transfer] to transfer pictures recorded in the built-in memory.
Follow the procedures below to perform [Smart  Transfer].
1Setting [Smart Transfer] (→244)
2[Auto Transfer] (→245) or [Transfer Now] (→246)    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]SQW0195
- 243 -
 ●When [Auto Transfer] is set to [ON], the camera automatically uploads recorded 
pictures. For this reason pictures may be uploaded unintentionally if, for example, 
you share this unit with other people. Panasonic assumes no responsibility for any 
damages caused by uploaded images.
 ●Panasonic assumes no responsibility for any damages caused by the use of [Smart 
Transfer].
 ●Electromagnetic waves from the camera can affect instruments and meters. If you are 
on an airplane or anyplace where the use of functions like Wi-Fi or NFC is prohibited, 
turn [Airplane Mode] to [ON].
 ●If charging does not start due to an error (→288), [Smart Transfer] may not work.    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]SQW0195
- 244 -
Setting [Smart Transfer]
The first time you use [Smart Transfer], follow the steps below to make settings. For the 
second and subsequent times, you can change the settings with [Set Destination]  (→247).
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select transfer destination and press 
[MENU/SET]
Select the method for connecting to a wireless access point, 
and set
 • For details (→250).
Set the transfer destination
When [PC] is selected • For details regarding preparation before transfer, read “T
o create a folder that 
receives images”.  (→224)
  Use cursor button to select a PC you want to connect, and then press 
[MENU/SET]
  Use cursor button to select the incoming folder, and then press [MENU/SET]
When [Cloud Sync. Service] is selected
 • For details regarding preparation before transfer, read “When sending images to  [Cloud Sync. Service]”. 

(→234)
When [AV device] is selected
 • For details, read “Sending pictures to A

V equipment”. (→220)
 • Select the A

V device you want to connect, and then press the [MENU/SET] 
button.
Use cursor button to select [Auto Transfer] and press  
[MENU/SET]
Use cursor button to select [ON] and press [MENU/SET]
 • Only the images you recorded when [Auto T ransfer] is set to [ON] is transferred. 
Pictures recorded before that are not transferred.    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]SQW0195
- 245 -
[Auto Transfer]
Automatically transfer pictures during charging.
Preparation: Set [Smart Transfer]. (→244)
Turn off the camera
(When using a power outlet)
Connect the AC adaptor (supplied) and the camera using the 
USB connection cable (supplied), and plug the AC adaptor 
(supplied) into the electrical outlet
(When using a PC)
Connect the camera to a computer using the USB connection 
cable (supplied)
 • [Smart Transfer] starts automatically according to the [Charge Priority]  (→248)  
setting.
 • [Smart T

ransfer] is not available when the memory card is locked.
 • Depending on the specifications of the PC, [Smart T

ransfer] may fail.
 ●If there are pictures that are not transferred when [Auto Transfer] is set to [OFF], 
the message that confirms whether to transfer these pictures is displayed. Select a 
desired option.    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]SQW0195
- 246 -
[Transfer Now]
Transfer pictures to the preset destination immediately.
Preparation: Set [Smart Transfer]. (→244)
Connect the AC adaptor (supplied) and the camera using the 
USB connection cable (supplied), and plug the AC adaptor 
(supplied) into the electrical outlet
 • Switch to playback mode.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select [Transfer Now] and press  
[MENU/SET]
 • Confirmation screen is displayed. It is executed when [Yes] is selected.   Exit the menu after it is executed.    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]SQW0195
- 247 -
[Set Destination]
Changes transfer destination of pictures and settings.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select [Set Destination] and press  
[MENU/SET]
Use cursor button to select an item and press [MENU/SET]
Item Description
[Destination] Change the transfer destination.
[PC], [Cloud Sync. Service], [AV device]
 • To change the wireless access point you want to connect to  Select [Change Access Point] and pres s [MENU/SET]
(If you selected [Cloud Sync. Service], select [Yes] at the confirmation 
screen of the connection destination and press [MENU/SET])
  Select the method for connecting to a wireless access point, and set • For details (→250) .
[Size] Change the size of the picture to be transferred.
[Original], [Change]
 • [Change]:  [M] or [S] can be selected for picture size. 
The aspect ratio of the pictures does not change.
[File Format]
*1[JPG], [RAW+JPG], [RAW]
[Delete Location 
Data]
*2You can select whether to delete location information from the picture 
when transferring pictures.
[ON]: 
 Erase location information and transfer.
[OFF]:  Transfer without deleting location information. • The location information is only deleted for the transferred pictures.  (Location information is not deleted from pictures in this unit)
[Cloud Limit]
*2You can select whether to perform [Smart Transfer] when the capacity of 
the Cloud Folder runs out of free space.
[ON]: 
 Do not transfer pictures.
[OFF]:  Delete oldest pictures in order and transfer new pictures.
*1 Only available when the [Destination] is set to [PC].*2 Only available when the [Destination] is set to [Cloud Sync. Service].    
						

							Wi-Fi/NFC
Transferring pictures automatically  [Smart Transfer]SQW0195
- 248 -
[Charge Priority]
Set priority to charge or picture transfer.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select [Charge Priority] and press  
[MENU/SET]
Use cursor button to select an item and press [MENU/SET]
Item Description
[ON] Give priority to charging. Pictures are transferred after charging.
[OFF] Give priority to picture transfers.
 • When remaining battery is low, charging may be prioritized.
[Display Log]
You can check the day the picture was sent and its details.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Smart Transfer] and press  
[MENU/SET]
Use cursor button to select [Display Log] and press  
[MENU/SET]    
						

							Wi-Fi/NFC
About connections
SQW0195- 249 -
After selecting the Wi-Fi function and sending destination, select the connection method. 
If you are out and unable to use your wireless access point, or temporarily connecting to 
equipment you do not ordinarily use, or in a similar situation, it is convenient to make a 
direct connection. 
If you are connecting with the same settings as used previously, you can quickly start 
using the Wi-Fi function by connecting with [History Connection] or [Favorite Connection].
Wireless access point
Connection methodDescription
[Via Network] Connects through a wireless access point. (→250)
[Direct] Your equipment connects directly to the camera. (→253)    
						

							Wi-Fi/NFC
About connectionsSQW0195
- 250 -
[Via Network] Connecting via a wireless access point
Select a connection method to the wireless access point.
 • WPS refers to a function that allows you to easily configure  the settings related to the connection and security of 
wireless LAN devices. T

o check if the wireless access 
point you are using is compatible with WPS, refer to the 
instruction manual of the wireless access point.
Connection method Description
[WPS (Push-Button)] Save push button type wireless access point that is compatible with 
Wi-Fi Protected Setup™ with a WPS mark.
Press the wireless access point WPS button until it 
switches to WPS Mode
 • Refer to the wireless access point instruction manual for details.
[WPS (PIN code)] Save PIN code type wireless access point that is compatible with 
 
Wi-Fi Protected Setup with a WPS mark.
 Select the wireless access point you are connecting to  Enter the PIN code displayed on the camera screen into the 
wireless access point
 Press [MENU/SET] • Refer to the wireless access point instruction manual for details.
[From List] Select this option when you are not sure about the WPS compatibility
, 
or when you want to search for and connect to a wireless access 
point.
 • For details (→251)

.