Panasonic Digital Camera Dmc Zs50 Owners Manual For Advanced Features

							Wi-Fi/NFC
Sending pictures to AV equipmentSQW0195
- 221 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Select [New Connection] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Send Images While Recording], 
and then press [MENU/SET]
Use cursor button to select [AV device], and then press 
[MENU/SET]
Select [Via Network] or [Direct] to connect (→249)
Select the device you wish to connect to
 • When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. T o change the 
send setting, press the [DISP.] button. (→258)
Take still pictures
 • To change the setting or disconnect, press [Wi-Fi] button.  (→190)
Y ou cannot change the settings while sending still pictures. Wait until sending is 
complete.    
						

							Wi-Fi/NFC
Sending pictures to AV equipmentSQW0195
- 222 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Select [New Connection] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [AV device], and then press 
[MENU/SET]
Select [Via Network] or [Direct] to connect (→249)
Select the device you wish to connect to
 • When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. T o change the 
send setting, press the [DISP.] button. (→258)
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→190)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MULTI] is limited.
 • Confirmation screen is displayed. If you select [Yes], the operation is executed.    
						

							Wi-Fi/NFC
Sending pictures to a PC
SQW0195- 223 -
Still pictures and motion pictures recorded by the camera can be sent to a PC.
You can make a setting so that pictures in the camera can be sent to a PC automatically 
while the camera battery is charging. ([Smart Transfer] (→242))
 ■Sending method, and pictures that can be sent
JPEG RAW MP4AVCHD*3D
Sending a picture each time one is recorded 
[Send Images While Recording] ○ ○ – – ○
Sending selected pictures
[Send Images Stored in the Camera] ○ ○ ○ ○ ○
*  Motion pictures recorded in [AVCHD] can be sent in file sizes of up to 4 GB. Files la
rger than 4 GB 
cannot be sent.
 • Some images may not be played back or sent depending on the device. • See the operating instructions of the destination device for more information about  picture playback.
 • For more details about picture sending methods.  (→257)
Preparations:
 • Turn the computer on. • Prepare folders for receiving images on the PC before sending a picture to the PC.   (→224)
 • If the standard settings are changed for the workgroup on the connected PC, you must change settings in [PC Connection] on this unit.  (→259)
See the part of the manual that applies to your objective.
Sending a picture each time one is recorded ([Send Images While Recording]) 
(→225)
Sending selected pictures ([Send Images Stored in the Camera]) (→226)    
						

							Wi-Fi/NFC
Sending pictures to a PCSQW0195
- 224 -
 ■To create a folder that receives images
 • Create a PC user account (account name (up to 254 characters) and password (up to 32 characters)) consisting of alphanumeric characters. An attempt to create a receive 
folder may fail if the account includes non-alphanumeric characters.
 ■When using “PHOTOfunSTUDIO”
Install “PHOTOfunSTUDIO” on the PC
 • “PHOTOfunSTUDIO” is not compatible with Mac. • For details on operating environment and installation, read “About supplied software” (→269)
 and “Installing supplied software”  (→270).
Create a folder that receives images with 
“PHOTOfunSTUDIO”
 • To create the folder automatically, select [Auto-create]. To specify a folder, 
create a new folder , or set a password to the folder, select [Create manually].
 • For details, refer to the operating instructions of “PHOTOfunSTUDIO” (PDF).
 ■When not using “PHOTOfunSTUDIO”
(For Windows)
Supported OS: Windows 8.1 / Windows 8 / Windows 7 / Windows Vista
Example: Windows 7
Select a folder you intend to use for receiving, then right-
click
Select [Properties], then enable sharing of the folder
 • For details, refer to the operating instructions of your PC or Help on the operating system.
(For Mac)
Supported OS: OS X v10.5 to v10.10
Example: OS X v10.8
Select a folder you intend to use for receiving, then click on 
the items in the following order
[File] → [Get Info]
Enable sharing of the folder
 • For details, refer to the operating instructions of your PC or Help on the  operating system.    
						

							Wi-Fi/NFC
Sending pictures to a PCSQW0195
- 225 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Select [New Connection] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Send Images While Recording] 
and press [MENU/SET]
Use cursor button to select [PC] and press [MENU/SET]
Select [Via Network] or [Direct] to connect (→249)
Select the PC you want to connect to
 • If the PC you want to connect to is not displayed, select [Manual Input], then enter the computer name (for Mac, enter the NetBIOS name).
Select the folder you want to send to
 • When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. T o change the 
send setting, press the [DISP.] button. (→258)
Take still pictures
 • To change the setting or disconnect, press [Wi-Fi] button.  (→190)
Y ou cannot change the settings while sending still pictures. Wait until sending is 
complete.    
						

							Wi-Fi/NFC
Sending pictures to a PCSQW0195
- 226 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Select [New Connection] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [PC] and press [MENU/SET]
Select [Via Network] or [Direct] to connect (→249)
Select the PC you want to connect to
 • If the PC you want to connect to is not displayed, select [Manual Input], then enter the computer name (for Mac, enter the NetBIOS name).
Select the folder you want to send to
 • When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. T o change the 
send setting, press the [DISP.] button. (→258)
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→190)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MULTI] is limited.
 • Confirmation screen is displayed. If you select [Yes], the operation is executed.    
						

							Wi-Fi/NFC
Sending pictures to a PCSQW0195
- 227 -
 ●Folders sorted by the sent date are created in the specified folder , and pictures are 
saved in those folders.
 ●If the screen for a user account and password entry appears, enter the one you set on 
your PC.
 ●If the computer name (for Mac, the NetBIOS name) contains spaces, etc., the name 
may not be properly recognized. If you cannot connect, we recommend changing 
the computer name (for Mac, the NetBIOS name) to a combination of 15 or less 
alphanumeric characters only.    
						

							Wi-Fi/NFC
Using WEB services
SQW0195- 228 -
Through “LUMIX CLUB”, you can send still pictures and motion pictures to social 
networking services, etc. By selecting the setting to automatically transfer still pictures 
and motion pictures to [Cloud Sync. Service], you can receive the transferred still pictures 
and motion pictures on a PC or a smartphone.
You can make a setting so that pictures in the camera can be sent to a WEB service or 
cloud synchronization service automatically while the camera battery is charging. ([Smart 
Transfer] (→242))
Wireless access pointWEB services
Cloud 
synchronization 
services
LUMIX CLUB
See the part of the manual that applies to your objective. 
When sending images to WEB service (→229)
When sending images to [Cloud Sync. Service] (→234)    
						

							Wi-Fi/NFC
Using WEB servicesSQW0195
- 229 -
When sending images to WEB service
 ■Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD 3D
Sending a picture each time one is recorded 
[Send Images While Recording] ○ – – – ○
Sending selected pictures
[Send Images Stored in the Camera] ○ – ○ – ○
 • Some images may not be played back or sent depending on the device. • For details about playback of pictures, check the WEB service to which you will send 
the pictures.
 • For more details about picture sending methods.  (→257)
Preparation:
Y

ou need to register to “LUMIX CLUB”  (→237) to send a picture to a WEB service.
When sending images to WEB services, such as Facebook or YouTube, the WEB 
service being used must be registered with the “LUMIX CLUB”. Registering multiple WEB 
services will send images to all services simultaneously. (→231)
See the part of the manual that applies to your objective.
Sending a picture each time one is recorded ([Send Images While Recording]) 
(→232)
Sending selected pictures ([Send Images Stored in the Camera]) (→233)    
						

							Wi-Fi/NFC
Using WEB servicesSQW0195
- 230 -
 ●Images uploaded to the WEB service cannot be displayed or deleted with this camera. 
Check images by accessing the WEB service with your smartphone or computer .
 ●If sending images fails, a report email outlining the failure will be sent to the email 
address registered with “LUMIX CLUB”.
 ●Images may contain personal information that can be used to identify the user , 
such as a title, the time and date when the images were taken, and the location 
where the image was taken. Check this information before uploading images to 
WEB services.
 ●Panasonic assumes no responsibility for the damages resulting from the leakage, 
loss, etc. of images uploaded on WEB services.
 ●When uploading images to the WEB service, do not delete images from this 
camera, even after they have finished sending, until you have checked that 
they have been properly uploaded to the WEB service. Panasonic assumes no 
responsibility for the damages resulting from the deletion of images stored in this 
unit.