Panasonic Digital Camera Dmc Zs50 Owners Manual For Advanced Features

							Wi-Fi/NFC
Using WEB servicesSQW0195
- 231 -
 ■Using WEB services
When sending images to WEB services, such as Facebook or YouTube, the WEB 
service being used must be registered with the “LUMIX CLUB”. Registering multiple 
WEB services will send images to all services simultaneously.
 • Check the “FAQ/Contact us” on the following site for compatible WEB services. http://lumixclub.panasonic.net/eng/c/lumix_faqs/
Preparation:
Make sure that you have created an account on the WEB service you want to use, and 
have the login information available.
Connect to the “LUMIX CLUB” site using a smartphone or 
computer
http://lumixclub.panasonic.net/eng/c/
Enter your “LUMIX CLUB” login ID and password and log in to 
the service 
(→237)
If you have not registered your email address with “LUMIX 
CLUB”, register the email address
Select the WEB service to be used for WEB service link 
settings and register it
 • Follow the instructions on the screen to register the service.    
						

							Wi-Fi/NFC
Using WEB servicesSQW0195
- 232 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Select [New Connection] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Send Images While Recording], 
and then press [MENU/SET]
Use cursor button to select [Web service], and then press 
[MENU/SET]
Select [Via Network] and connect (→250)
Select a WEB service you want to connect
 • When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. T o change the 
send setting, press the [DISP.] button. (→258)
Take still pictures
 • To change the setting or disconnect, press [Wi-Fi] button.  (→190)
Y ou cannot change the settings while sending still pictures. Wait until sending is 
complete.    
						

							Wi-Fi/NFC
Using WEB servicesSQW0195
- 233 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Select [New Connection] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [Web service], and then press 
[MENU/SET]
Select [Via Network] and connect (→250)
Select a WEB service you want to connect
 • When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. T o change the 
send setting, press the [DISP.] button. (→258)
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→190)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MULTI] is limited.
 • Confirmation screen is displayed. If you select [Yes], the operation is executed.    
						

							Wi-Fi/NFC
Using WEB servicesSQW0195
- 234 -
When sending images to [Cloud Sync. Service]
 ■Sending method, and pictures that can be sent
JPEG RAW MP4 AVCHD 3D
Sending a picture each time one is recorded 
[Send Images While Recording] ○ – – – ○
Sending selected pictures
[Send Images Stored in the Camera] ○ – ○ – ○
 • Some images may not be played back or sent depending on the device. • See the operating instructions of the destination device for more information about 
picture playback.
 • For more details about picture sending methods.  (→257)
Preparation:
Y

ou need to register to “LUMIX CLUB”  (→237) and configure the Cloud Sync. setting to send 
a picture to a Cloud Folder. To send images to a PC, Cloud Sync. setting is required. 
Configure the settings on a PC with “PHOTOfunSTUDIO” or on a smartphone with 
“Image App”.
See the part of the manual that applies to your objective.
Sending a picture each time one is recorded ([Send Images While Recording]) 
(→235)
Sending selected pictures ([Send Images Stored in the Camera]) (→236)
 ■About the images sent to a Cloud Folder by the use of [Cloud Sync. 
Service] (Current as of January 2015)
 • If you set the picture destination to [Cloud Sync. Service], sent pictures are  temporarily saved in the cloud folder, and they can be synchronized with the device 
in use, such as the PC or smartphone.
 • A Cloud Folder stores transferred images for 30 days (up to 1000 pictures). T

ransferred images are deleted automatically 30 days after the transfer . 
Furthermore, when the number of stored images exceeds 1000, some images may 
be deleted depending on the [Cloud Limit]  (→258) setting even within 30 days after the 
transfer.
 • When the download of images from a Cloud Folder to all specified devices is  complete, images may be deleted from the Cloud Folder even within 30 days after 
the transfer.    
						

							Wi-Fi/NFC
Using WEB servicesSQW0195
- 235 -
 ■Sending a picture each time one is recorded ([Send Images While 
Recording])
Select [New Connection] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Send Images While Recording], 
and then press [MENU/SET]
Use cursor button to select [Cloud Sync. Service], and then 
press [MENU/SET]
Check the message and press [MENU/SET]
Select [Via Network] and connect (→250)
Check the send setting
 • When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. T o change the 
send setting, press the [DISP.] button. (→258)
Take still pictures
 • To change the setting or disconnect, press [Wi-Fi] button.  (→190)
Y ou cannot change the settings while sending still pictures. Wait until sending is 
complete.    
						

							Wi-Fi/NFC
Using WEB servicesSQW0195
- 236 -
 ■Sending selected pictures ([Send Images Stored in the Camera])
Select [New Connection] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [Send Images Stored in the 
Camera], and then press [MENU/SET]
Use cursor button to select [Cloud Sync. Service], and then 
press [MENU/SET]
Check the message and press [MENU/SET]
Select [Via Network] and connect (→250)
Check the send setting
 • When the connection is established, the confirmation screen for the transmission setting is displayed. Check the setting and press [MENU/SET]. T o change the 
send setting, press the [DISP.] button. (→258)
Select [SINGLE] or [MULTI] 
 • To change the setting or disconnect, press [Wi-Fi] button.  (→190)
 ■When [SINGLE] is selected
  Select the picture  Select [Set]
 ■When [MULTI] is selected
  Select the picture (repeat) • If selected again, the setting will be canceled.  Select [OK] • The number of pictures that can be sent by 
[MULTI] is limited.
 • Confirmation screen is displayed. If you select [Yes], the operation is executed.    
						

							Wi-Fi/NFC
Using “LUMIX CLUB”
SQW0195- 237 -
About the “LUMIX CLUB”
Acquire a “LUMIX CLUB” login ID (free).
If you register this unit to the “LUMIX CLUB”, you can synchronize images between the 
devices you are using, or transfer these images to WEB services.
Use the “LUMIX CLUB” when uploading pictures to WEB services.
 • You can set the same “LUMIX CLUB” login ID for this unit and a smartphone.  (→240)
Refer to the “LUMIX CLUB” site for details.
http://lumixclub.panasonic.net/eng/c/
Please note;
 • The service may be suspended due to regular maintenance or unexpected problems,  and service contents may be changed or added to, without prior notice to the users.
 • The service may be stopped in whole or in part with a reasonable period of advance notice.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [LUMIX CLUB], and press  
[MENU/SET]
Select [Set/Add Account]
Select [New account]
 • Connect to the network. Proceed to the next page by selecting [Next]. • A confirmation screen will be displayed if a login ID has already been acquired for the camera. Select [Y
es] to acquire a new login ID, or [No] if you do not need to 
acquire a new login ID.
(Continued on the next page)    
						

							Wi-Fi/NFC
Using “LUMIX CLUB”SQW0195
- 238 -
Select the method for connecting to a wireless access point, 
and set
 • For details (→250) . • The settings screen will only appear during the first connection. Connection 
methods set on this unit are stored and will be used for subsequent connections. 
If you want to change the wireless access point to connect to, press the [DISP .] 
button, then change the connecting destination.
Read through the “LUMIX CLUB” terms of use and select 
[Agree]
 • You can press   to switch pages. • Turn the zoom lever clockwise to enlarge the page display (x2 magnification). • If you turn the zoom lever counterclockwise after enlarging the page, the page  returns to its original size (no magnification).
 • You can use     to move the position of the area to be enlarged. • Press [Q.MENU/ ] button to cancel the process without acquiring a login ID.
Enter the password
 • Enter any combination of 8 to 16 characters and numbers for the password. • For details on how to enter characters, refer to “Entering T ext” (→76).
Check the login ID and select [OK]
 • The login ID (12-digit number) will be displayed automatically.  When logging in to the “LUMIX CLUB” with a computer , you only need to enter the 
numbers.
 • A message is displayed when the connection is complete. Select [OK]. • Be sure to make a note of the login ID and password. • Close the menu after changing settings.    
						

							Wi-Fi/NFC
Using “LUMIX CLUB”SQW0195
- 239 -
 ■Using a previously acquired login ID/confirming and changing login ID 
and password ([Set Login ID])
Preparation:
To use a previously acquired login ID, confirm your ID and password.
To change the “LUMIX CLUB” password on the camera, access the “LUMIX CLUB” 
website from your smartphone or PC and change the “LUMIX CLUB” password in 
advance.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [LUMIX CLUB], and press  
[MENU/SET]
Select [Set/Add Account]
Select [Set Login ID]
 • The login ID and password are displayed. • The password is displayed as “”. • Close the menu if only checking the login ID.
Select the item you wish to change
Enter your login ID or password
 • Refer to “Entering T ext” (→76) for information on how to enter text. • Enter the new password you have created on your smartphone or PC into the 
camera. If the password differs from the one you created on your smartphone or 
PC, you will not be able to upload images.
Select [Exit]    
						

							Wi-Fi/NFC
Using “LUMIX CLUB”SQW0195
- 240 -
 ■To set the same login ID for the camera and the smartphone/tablet
 • Setting the same login ID on this unit and your smartphone is convenient for sending images on this unit to other devices or WEB services.
 ■When either this unit or the smartphone/tablet has acquired the login ID
Connect this unit to the smartphone (→194)
From the “Image App” menu, set the common login ID
 • The login IDs for this unit and the smartphone become the same.
 • After connecting this unit to the smartphone, the setup screen for a common login ID may appear when you display the playback screen. Y

ou can also set a common login 
ID by following the on-screen instructions.
 • This operation is not available for [Wi-Fi Direct] connection.
 ■When this unit and the smartphone/tablet have acquired different login IDs
(When you want to use the smartphone’s login ID for this unit)
Change the login ID and password for this unit to those acquired 
by the smartphone
(When you want to use this unit’s login ID for the smartphone)
Change the login ID and password for the smartphone to those 
acquired by this unit
 ■Check the “LUMIX CLUB” terms of use
Check the details if the terms of use have been updated.
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press  
[MENU/SET]
 (→61)
Use cursor button to select [LUMIX CLUB], and press  
[MENU/SET]
Select [Terms of use]
 • The camera will connect to the network and the terms of use will be displayed.  Close the menu after checking the terms of use.