Panasonic Dmc Fz1000 Owners Manual

							261
12. Using the Wi-Fi function
1Connect to a smartphone.  (P255)
2Operate the smartphone.
1Connect to a smartphone. (P255)
2Operate the smartphone.
•
The function can be assigned to the top, bottom, 
left or right according to your preference.
•You cannot save pictures taken in RAW format, 
motion pictures recorded with [AVCHD] or with 
their picture quality size set to [MP4] in 4K.
Playing back images in the camera
1 Select [ ].
•You can switch the images to be 
displayed by selecting the icon ( A
) 
on the top left of the screen. To 
display images stored in the camera, 
select [LUMIX].
2 Touch the image to enlarge it.
Saving images stored in the camera
1Select [ ].
•You can switch the images to be 
displayed by selecting the icon ( A
) 
on the top left of the screen. To 
display images stored in the camera, 
select [LUMIX].
2 Touch and hold an image, and drag 
it to save it.





 
						

							12. Using the Wi-Fi function
262
A Wi-Fi connection using NFC function is possible by touching the smartphone to this unit, 
and you can easily transfer images displayed on the screen.
An image can be sent on site immediately after  taking it, so you can easily send it to the 
smartphone
¢ of your family or friend.¢ Installing the “ Image App ” is required for use.
1Play back the picture in the camera.2Launch “ Image App ” on the smartphone.
3While  [ ]  is displayed on the connection 
screen of the “ Image App ”, touch the 
smartphone to  [ ] of the camera.
•
It may take time to complete the connection.•If a connection attempt by touching fails, restart 
the “ Image App ”, and then display the screen in 
step 
2 again.•To transfer more than one image, repeat steps 
1 and 3.
(They cannot be transferred as a batch.)
•Depending on the environment you are using, it may take a few minutes to complete the image 
transfer.
•You do not need to keep the devices in contact with each other while an image is being 
transferred.
Transferring images stored in the camera easily
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON].  (P297)
•Set [Touch Sharing] to [ON]. (P298)
(On your smartphone)
•Check that your smartphone is a compatible 
model.
•Turn on the Wi-Fi function.•Install the “ Image App ” in advance.  (P254) 
						

							263
12. Using the Wi-Fi function
1Connect to a smartphone.  (P255)
2Operate the smartphone.
•
The function can be assigned to the top, bottom, 
left or right according to your preference.
You can send location information acquired with a smartphone to the camera. After 
sending the information, you can also write it on images stored in the camera.
1 Start recording location information
2 Start recording images
3 Finish recording the location information
4 Sending and writing location information
•
Location information different from that at the time of recording may be written. Keep the 
following points in mind:
–Set the camera’s [Home] setting in [World Time] to your region.
–Once you start recording location information with your smartphone, do not change the 
camera’s [Home] setting in [World Time].
•Location information cannot be written on images that were recorded when the clock was not 
set.
Sending images in the camera to an SNS
1 Select [ ].
•You can switch the images to be 
displayed by selecting the icon (
A) 
on the top left of the screen. To 
display images stored in the camera, 
select [LUMIX].
2 Touch and hold an image, and drag 
it to send it to an SNS, etc.
•
The image is sent to a web service 
such as an SNS.
Adding location information to images stored in the camera from a 
smartphone/tablet





 
)25
 
						

							12. Using the Wi-Fi function
264
∫Start recording location information
Operate the smartphone.
∫ Finish recording the location information
Operate the smartphone.
∫ Sending and writing location information
1Connect to a smartphone.  (P255)2Operate the smartphone.
•
Cautions for Use:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject 
when you use this function. Use at your own risk.
•On the smartphone, you can set the acquisition interval of location information and check the 
transfer status of location information.
Refer to [Help] in the “ Image App ” menu for details.
•(When using “ Image App ” for iOS)
If you press the Home or On/Off button of the smartphone while location information is being 
recorded, the recording will stop.
Not available in these cases:
•
The smartphone may fail to acquire location information in China and the border area in the 
neighbouring countries of China.
(As of June 2014)
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
•
Follow the on-screen messages to operate the smartphone.
•Location information is not written onto the images recorded when [Rec Format] is set 
to [AVCHD].
•When the card in the camera lacks sufficient free space, writing location information 
may not be possible.
•Once the location information is sent to the camera, you can also write it on images by 
performing [Location Logging] in the [Playback] menu.


 
						

							265
12. Using the Wi-Fi function
∫Methods for sending and images that can be sent
¢ Excluding motion pictures recorded with their size set to [4K] in [Rec Quality]•Some images may not be played back or sent depending on the device.
•For information on the playback of images, check the operating instructions of the destination 
device.
•For details on how to send images, refer to  P294.
Click the followings to jump to the beginning of each menu.
Sending images to a smartphone/tablet by controlling the camera
JPEGRAWMP4AVCHD
Sending an image each time a recording 
is made
([Send Images While Recording]) ±
———
Sending selected images
( [Send Images Stored in the Camera]) ±
—±
¢—
Preparations:
•
Install the “ Image App ” in advance.  (P254)
Sending an image each time a recording is made ([Send Images While 
Recording] )P266
Sending selected images ([Send Images Stored in the Camera]) P267 
						

							12. Using the Wi-Fi function
266
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P288)
3Select a device you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P296)
4Take pictures.
•The pictures are sent automatically after taking them.
•To change the setting or disconnect, press [Wi-Fi].  (P252)
You cannot change the settings while sending pictures. Wait until sending is complete.
Sending an image each time a recording is made ([Send Images While 
Recording] )
>[New Connection]  > [Send Images While Recording]  > 
[Smartphone]
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and set.
3 Start “ Image App ”.  (P254)
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]:
1 Start “ Image App ”.  (P254)
When connecting with [Manual Connection] in [Direct]:
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of this unit, and 
then enter the password.
3 Start “ Image App ”.  (P254)
Wi-Fi 
						

							267
12. Using the Wi-Fi function
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P288)
3Select a device you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P296)
4Select [Single Select] or [Multi Select].
•To change the setting or disconnect, press [Wi-Fi].  (P252)
Sending selected images ([Send Images Stored in the Camera])
>[New Connection]  > [Send Images Stored in the Camera]  > 
[Smartphone]
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and set.
3 Start “ Image App ”.  (P254)
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]:
1 Start “ Image App ”.  (P254)
When connecting with [Manual Connection] in [Direct]:
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of this unit, and 
then enter the password.
3 Start “ Image App ”.  (P254)
[Single Select] setting
1 Select the picture.
2 Press [MENU/SET].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is canceled when the picture is selected 
again.
2Select [OK].
•The number of pictures that can be sent by [Multi 
Select] is limited.
•Confirmation screen is displayed. It is executed when [Yes] is selected.
Wi-Fi
2. 
						

							12. Using the Wi-Fi function
268
Displaying pictures on a TV
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P288)
3Select a device you want to connect.
•When the connection is established, the screen is displayed.
4Take or play back pictures on this unit.
•To change the setting or disconnect, press [Wi-Fi].  (P252)
•When a TV is connected to this unit, the TV screen may temporarily return to the status before 
the connection. Pictures are displayed again when you take or play back pictures.
•[Effect] and [Sound] of the Slide Show are disabled.
Not available in these cases:
•
Motion pictures cannot be played back.•During the multi/calendar playback, pictures displayed on the screen of this unit are not 
displayed on TV.
You can display pictures on a TV that supports the 
Digital Media Renderer (DMR) function of the DLNA 
standard.
•
If you display pictures using the Wi-Fi function, they 
cannot be output in 4K resolution. To output them in 4K 
resolution, connect the camera and the TV with an HDMI 
micro cable.  (P301)
Preparations:
Set the TV to DLNA waiting mode.
•
Read the operating instructions for your TV.
>[New Connection]  > [Playback on TV]Wi-Fi 
						

							269
12. Using the Wi-Fi function
Printing Wirelessly
∫Methods for sending and images that can be sent
•
Some images may not be sent depending on the device.•For details on how to send images, refer to  P294.
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P288)3Select a printer you want to connect.4Select pictures, and then print.
•The procedure for selecting pictures is the same as the one for when the USB connection 
cable is connected.
For details, refer to  P315.
•To change the setting or disconnect, press [Wi-Fi].  (P252)
Not available in these cases:
•Motion pictures cannot be printed out.
You can send images to a compatible printer, and print 
them wirelessly.
JPEGRAWMP4AVCHD
Sending selected images
( [Send Images Stored in the Camera]) ±
———
Preparations:
•
You can print out recorded pictures wirelessly from a PictBridge (wireless LAN-compatible)¢ 
printer.
¢ Compliant with the DPS over IP standards.
For details on the PictBridge (wireless LAN-compatible) printer, contact the respective 
company.
> [New Connection]  > [Send Images Stored in the Camera]  > 
[Printer]Wi-Fi 
						

							12. Using the Wi-Fi function
270
When sending images to AV device
You can send pictures and motion pictures  to AV devices in your house (home AV 
devices).
∫ Methods for sending and images that can be sent
•
Some images may not be played back or sent depending on the device.•For information on the playback of images, check the operating instructions of the destination 
device.
•For details on how to send images, refer to  P294.
A
Wireless access point BHome AV device
JPEGRAWMP4AVCHD
Sending an image each time a recording 
is made
([Send Images While Recording]) ±
———
Sending selected images
([Send Images Stored in the Camera]) ±
———