Panasonic Dmc Fz1000 Owners Manual

							271
12. Using the Wi-Fi function
Click the followings to jump to the beginning of each menu.
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P288)3Select a device you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P296)
4Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P252)
You cannot change the settings while sending pictures. Wait until sending is complete.
Preparations:
When sending a picture to AV devices, set your device to DLNA waiting mode.
•
Read the operating instructions of your device for details.
Sending an image each time a recording is made ([Send Images While  Recording] )P271
Sending selected images ([Send Images Stored in the Camera]) P272
Sending an image each time a recording is made ([Send Images While 
Recording] )
>[New Connection]  > [Send Images While Recording]  > [AV 
device]
Wi-Fi 
						

							12. Using the Wi-Fi function
272
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P288)3Select a device you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P296)
4Select [Single Select] or [Multi Select].
•To change the setting or disconnect, press [Wi-Fi].  (P252)
Sending selected images ([Send Images Stored in the Camera])
>[New Connection]  > [Send Images Stored in the Camera]  > [AV 
device]
[Single Select] setting
1 Select the picture.
2 Press [MENU/SET].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is canceled when the picture is selected 
again.
2Select [OK].
•The number of pictures that can be sent by [Multi 
Select] is limited.
•Confirmation screen is displayed. It is executed when [Yes] is selected.
Wi-Fi
2. 
						

							273
12. Using the Wi-Fi function
When sending images to PC
∫Methods for sending and images that can be sent
¢ A motion picture recorded in [AVCHD] can be sent to [PC] if the file size is 4 GB or smaller. It 
cannot be sent if the size is greater than 4 GB.
•Some images may not be played back or sent depending on the device.•For information on the playback of images, check the operating instructions of the destination 
device.
•For details on how to send images, refer to  P294.
Click the followings to jump to the beginning of each menu. You can send pictures and motion pictures recorded 
with this unit to a PC.
JPEGRAWMP4AV C H D¢
Sending an image each time a recording 
is made
([Send Images While Recording]) ±±
——
Sending selected images
([Send Images Stored in the Camera]) ±±±±
Preparations:
(On the camera)
•
If the workgroup of the destination PC has 
been changed from the standard setting, you 
also need to change the setting of this unit in 
[PC Connection]. 
(P297)(On your PC)
•Turn the computer on.•Prepare folders for receiving images on the 
PC before sending a picture to the PC. 
(P274)
Sending an image each time a recording is made ([Send Images While 
Recording] )P275
Sending selected images ([Send Images Stored in the Camera]) P276 
						

							12. Using the Wi-Fi function
274
•Create a PC user account [account name (up to 254 characters) and password (up to 32 
characters)] consisting of alphanumeric characters. An attempt to create a receive folder may 
fail if the account includes non-alphanumeric characters.
∫When using “ PHOTOfunSTUDIO ”
1Install “ PHOTOfunSTUDIO ” to the PC.
•For details on hardware requirements and installation, read “About the supplied software” 
(P307) .
2Create a folder that receives images with “ PHOTOfunSTUDIO ”.
•To create the folder automatically, select [Auto-create]. To specify a folder, create a new 
folder, or set a password to the folder, select [Create manually].
•For details, refer to the operating instructions of “ PHOTOfunSTUDIO ” (PDF).
∫When not using “ PHOTOfunSTUDIO ”
(For Windows)
Supported OS: Windows XP/Windows Vista/Windows 7/Windows 8/Windows 8.1
Example: Windows 7
1Select a folder you intend to use for receiving, then right-click.2Select [Properties], then enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the OS.
(For Mac)
Supported OS: OS X v10.5 to v10.9
Example: OS X v10.8
1Select a folder you intend to use for receiving, then click on the items in the 
following order.
[File]   [Get Info]
2Enable sharing of the folder.
•For details, refer to the operating instructions of your PC or Help on the OS.
To create a folder that receives images 
						

							275
12. Using the Wi-Fi function
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P288)3Select the PC you want to connect to.
•When the PC you want to connect to is not displayed, select [Manual Input], and enter the 
computer name of the PC (NetBIOS name for Apple Mac computers).
4Select the folder you want to send.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P296)
5Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P252)
You cannot change the settings while sending pictures. Wait until sending is complete.
Sending an image each time a recording is made ([Send Images While 
Recording] )
>[New Connection]  > [Send Images While Recording]  > [PC]
Wi-Fi 
						

							12. Using the Wi-Fi function
276
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P288)
3Select the PC you want to connect to.
•When the PC you want to connect to is not displayed, select [Manual Input], and enter the 
computer name of the PC (NetBIOS name for Apple Mac computers).
4Select the folder you want to send.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.].  (P296)
5Select [Single Select] or [Multi Select].
•To change the setting or disconnect, press [Wi-Fi].  (P252)
•Folders sorted by the sent date are created in the specified folder, and pictures are saved in 
those folders.
•If the screen for a user account and password entry appears, enter the one you set on your PC.•When the computer name (NetBIOS name for Appl e Mac computers) contains a space (blank 
character), etc., it may not be recognized correctly.
If a connection attempt fails, we recommend that you change the computer name (or NetBIOS 
name) to the one consisting of only alphanumeric characters, with a maximum of 
15 characters.
Sending selected images ([Send Images Stored in the Camera])
>[New Connection]  > [Send Images Stored in the Camera]  > [PC]
[Single Select] setting
1 Select the picture.
2 Press [MENU/SET].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is canceled when the picture is selected 
again.
2Select [OK].
•The number of pictures that can be sent by [Multi 
Select] is limited.
•Confirmation screen is displayed. It is executed when [Yes] is selected.
Wi-Fi
2. 
						

							277
12. Using the Wi-Fi function
Using Web services
You can send pictures and motion pictures to an SNS, etc. via “LUMIX CLUB”.
By setting up automatic transfers of pictures and motion pictures to the Cloud Sync. 
Service, you can receive the transferred pi ctures or motion pictures on a PC or 
smartphone.
Click the followings to jump to the beginning of each menu.
∫ Methods for sending and images that can be sent
¢ Excluding motion pictures recorded with their size set to [4K] in [Rec Quality]•Some images may not be played back or sent depending on the device.•For information on the playback of images, check the web service.
•For details on how to send images, refer to  P294.
A
Wireless access point BWeb service CCloud Sync. Service
Preparations:
You need to register to “LUMIX CLUB” (P283)  to send a picture to a web service.
To send images to a web service, you need to register the web service.  (P279)
When sending images to web service P277
When sending images to Cloud Sync. Service P281
When sending images to web service
JPEGRAWMP4AVCHD
Sending an image each time a recording 
is made
([Send Images While Recording]) ±
———
Sending selected images
([Send Images Stored in the Camera]) ±
—±
¢—
LUMIX CLUB
 
						

							12. Using the Wi-Fi function
278
Click the followings to jump to the beginning of each menu.
•
Images uploaded to the web service cannot be displayed or deleted with this camera. Check 
images by accessing the web service with your smartphone or computer.
•If sending images fails, a report email outlining the failure will be sent to the email address 
registered with “LUMIX CLUB”.
•Images may contain personal information that can be used to identify the user, such as a 
title, the time and date when the images was taken, and the location where the image 
was taken. Check this information before uploading images to web services.
Sending an image each time a recording is made ([Send Images While 
Recording] )P279
Sending selected images ([Send Images Stored in the Camera]) P280
•Panasonic assumes no responsibility for the damages resulting from the leakage, loss, etc. 
of images uploaded on web services.
•When uploading images to the web service, do not delete images from this camera, even 
after they have finished sending, until you  have checked that they have been properly 
uploaded to the web service. Panasonic assumes no responsibility for the damages 
resulting from the deletion of images stored in this unit. 
						

							279
12. Using the Wi-Fi function
When sending images to web services, the w eb service being used must be registered 
with the “LUMIX CLUB”.
•
Check the “FAQ/Contact us” on the following site for compatible web services.
http://lumixclub.panasonic.net/eng/c/lumix_faqs/
Preparation:
Make sure that you have created an account on the web service you want to use, and 
have the login information available.
1Connect to the “LUMIX CLUB” site using a smartphone or computer.
http://lumixclub.panasonic.net/eng/c/
2Enter your “LUMIX CLUB” login ID and password and log in to the service. 
(P283)
3Register your email address.
4Select the web service to be used and register it.
•Follow the instructions on the screen to register the service.
1Select the menu.
2Select [Via Network], and connect.  (P288)
3Select a web service you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.]. (P296)
4Take pictures.
•To change the setting or disconnect, press [Wi-Fi].  (P252)
You cannot change the settings while sending pictures. Wait until sending is complete.
Registering web services
Sending an image each time a recording is made ([Send Images While 
Recording] )
>[New Connection]  > [Send Images While Recording]  > [Web 
service]
Wi-Fi 
						

							12. Using the Wi-Fi function
280
1Select the menu.
2Select [Via Network], and connect.  (P288)3Select a web service you want to connect.
•When the connection is complete, the screen is displayed. To change the send setting, 
press [DISP.]. (P296)
4Select [Single Select] or [Multi Select].
•To change the setting or disconnect, press [Wi-Fi].  (P252)
Sending selected images ([Send Images Stored in the Camera])
>[New Connection]  > [Send Images Stored in the Camera]  > [Web 
service]
[Single Select] setting
1 Select the picture.
2 Press [MENU/SET].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is canceled when the picture is selected 
again.
2Select [OK].
•The number of pictures that can be sent by [Multi 
Select] is limited.
•Confirmation screen is displayed. It is executed when [Yes] is selected.
Wi-Fi
2.