Panasonic Dmc Fz1000 Owners Manual

							361
14. Others
Before cleaning the camera, remove the battery or the DC coupler (optional), or 
disconnect the power plug from the outlet. Then wipe the camera with a dry, soft 
cloth.
•
When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, 
and then with a dry cloth.
•To wipe off the dust or dirt on the m anual ring, use a dry, dust-free cloth.•Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the 
camera, since it may deteriorate the external case or the coating may peel off.
•When using a chemical cloth, be sure to follow the accompanying instructions.
∫For care of the eye cup on the viewfinder
•As the eye cup cannot be removed, gently wipe it with a dry and soft cloth, and be careful not to 
remove it.
•If you wipe the eye cup too hard and it is removed, consult the dealer or Panasonic.
•Do not press the monitor with excessive force. Uneven colors may appear on the monitor and it 
may malfunction.
•If the camera is cold when you turn it on,  the picture on the Monitor/Viewfinder will be slightly 
darker than usual at first. However, the picture will return to normal brightness when the internal 
temperature of the camera increases.
•Do not press the lens with excessive force.•Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it 
to malfunction. Also, be careful when placing the camera outside or near a window.
•When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the picture may 
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before  and after taking 
pictures.
•Retract the lens when carrying the camera.
Cleaning
About the Monitor/Viewfinder
Extremely high precision technology is employed to produce the Monitor/
Viewfinder screen. However there may be some dark or bright spots (red, blue or 
green) on the screen. This is not a malfunction. Though the Monitor/Viewfinder 
screen parts are produced with highly controlled precision technology, some 
pixels may be inactive or always lit. The spots will not be recorded on pictures 
on a card.
About the Lens 
						

							14. Others
362
The battery is a rechargeable lithium ion battery. Its ability to generate power comes 
from the chemical reaction that takes place inside it. This reaction is susceptible to 
the surrounding temperature and humidity. If the temperature is too high or too low, 
the operating time of the battery will become shorter.
Always remove the battery after use.
•
Place the removed battery in a plastic bag, and store or keep away from metallic objects (clips, 
etc.).
If you drop the battery accidentally, check to see if the body of the battery and the 
terminals are damaged.
•
Inserting a damaged battery in the camera will damage the camera.
Bring charged spare batteries when going out.
•Be aware that the operating time of the battery becomes shorter in low temperature conditions 
such as at a ski resort.
•When you travel, do not forget to bring the battery charger (supplied) so that you can charge 
the battery in the country that you are traveling in.
Dispose of unusable battery.
•The battery has a limited life.
•Do not throw the battery into fire because it may cause an explosion.•The unusable battery should be discarded in accordance with battery recycling laws. Call the 
RBRC hotline at 1-800-822-8837 for information.
Do not allow battery terminals to come into contact with metal objects (such as 
necklaces, hairpins, etc.).
•
This can cause short-circuiting or heat generation and you may be badly burned if you touch a 
battery.
•The [CHARGE] indicator may blink under the influence of static electricity or electromagnetic 
wave. This phenomenon has no effects on charging.
•If you use the battery charger near a ra dio, the radio reception may be disturbed.
Keep the charger 1 m (3.3 feet) or more away from radio.
•The charger may generate whirring sounds when it is being used. This is not a malfunction.•After use, be sure to disconnect the power supply device from the electrical outlet.
(A very small amount of current is consumed if it is left connected.)
•Keep the terminals of the charger and battery clean.
Battery
Charger 
						

							363
14. Others
Do not leave the card where the temperature is high, where electromagnetic waves 
or static electricity are easily generated or exposed to direct sunlight.
Do not bend or drop the card.
•
The card may be damaged or the recorded content may be damaged or deleted.•Put the card in the card case or the storage bag after use and when storing or carrying the 
card.
•Do not allow dirt, dust, or water to get into the terminals on the back of the card and do not 
touch the terminals with your fingers.
Notice for when transferring to another party, or disposing of the memory card
“Format” or “delete” using the camera or a PC will only modify the file management 
information, it will not erase the data in the memory card completely.
It is recommended to physically destroy the memory card or use the commercially 
available computer data deletion software to completely erase the data in the 
memory card before transferring to another party or disposing.
Management of data in the memory card is the responsibility of the user.
Card 
						

							14. Others
364
If a name or birthday is set for [Profile Setup]/Face Recognition function, this personal 
information is kept in the camera and recorded in the image.
Setting a Wi-Fi password is recommended to protect personal information.  (P298)
Disclaimer
•
Information including personal information may be altered or vanish due to erroneous 
operation, effect of static electricity, accident, malfunction, repair, or other handlings.
Please note in advance that Panasonic is not liabl e in any way for any direct or indirect damage 
from the alteration or vanishing of information or personal information.
When requesting a repair, transferring to another party, or disposing.
•After making a copy of personal information, always delete information such as personal 
information and wireless LAN connection settings that you have saved within the camera with 
[Reset Wi-Fi Settings]/[Delete account]  (P54, 287) .
•Reset the settings to protect the personal information.  (P54)•Remove the memory card from the camera when requesting a repair.
•Settings may return to factory default when camera is repaired.•Please contact the dealer where you purchased the camera or Panasonic if above operations 
are not possible due to malfunction.
When transferring to another party, or disposing of the memory card, please refer to 
“Notice for when transferring to another party, or disposing of the memory card”. 
(P363)
When uploading images on web services
•
Images may contain information that can be used for identifying individuals such as titles, 
recording dates, and location information. When uploading images on web services, check 
carefully, and then upload.
About the personal information 
						

							365
14. Others
•Store the battery in a cool and dry place with a relatively stable temperature: [Recommended 
temperature: 15 oC to 25 oC (59 o F to 77  oF), Recommended humidity: 40%RH to 60%RH]
•Always remove the battery and the card from the camera.•If the battery is left inserted in the camera, it will  discharge even if the camera is turned off. If 
the battery continues to be left in the camera, it will discharge excessively and may become 
unusable even if charged.
•When storing the battery for a long period of time, we recommend charging it once a year. 
Remove the battery from the camera and store it again after it has completely discharged.
•We recommend storing the camera with a desiccant (silica gel) when you keep it in a closet or 
a cabinet.
•Check all the parts before taking pictures when you have not used the camera for a long 
period of time.
•Recorded data may be damaged or lost if the camera breaks down due to inappropriate 
handling. Panasonic will not be liable for any damage caused due to loss of recorded data.
•When you use a tripod, make sure the tripod is stable when this unit is attached to it.•You may not be able to remove the card or the battery when using a tripod or unipod.•You may not be able to touch the NFC antenna with another device when using a tripod or 
unipod.
•Make sure that the screw on the tripod or unipod is not at an angle when attaching or detaching 
the camera. You may damage the screw on the camera if you use excessive force when 
turning it. Also, the camera body and the rating label may be damaged or scratched if the 
camera is attached too tightly to the tripod or unipod.
•Read the operating instructions for the tripod or unipod carefully.
When not using the camera for a long period of time
About the picture data
About tripods or unipods 
						

							366
14. Others
•SDXC Logo is a trademark of SD-3C, LLC.•HDMI, the HDMI Logo, and High-Definition Multimedia 
Interface are trademarks or registered trademarks of HDMI 
Licensing LLC in the United States and other countries.
•“AVCHD”, “AVCHD Progressive” and the “AVCHD Progressive” 
logo are trademarks of Panasonic Corporation and Sony 
Corporation.
•Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.
•HDAVI Control™ is a trademark of Panasonic Corporation.
•Adobe is a trademark or registered trademark of Adobe 
Systems Incorporated in the United States and/or other 
countries.
•Windows and Windows Vista are either registered trademarks 
or trademarks of Microsoft Corporation in the United States 
and/or other countries.
•iMovie, Mac and Mac OS are trademarks of Apple Inc., 
registered in the U.S. and other countries.
•App Store is a service mark of Apple Inc.
•Android and Google Play are trademarks or registered 
trademarks of Google Inc.
•The Wi-Fi CERTIFIED Logo is a ce rtification mark of the Wi-Fi 
Alliance.
•The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
•“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and 
“WPA2” are marks or registered marks of the Wi-Fi Alliance.
•DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, 
service marks, or certification marks of the Digital Living 
Network Alliance.
•This product uses “DynaFont” from DynaComware 
Corporation. DynaFont is a registered trademark of 
DynaComware Taiwan Inc.
•QR Code is a registered trademark of DENSO WAVE 
INCORPORATED.
•Other names of systems and products mentioned in these 
instructions are usually the registered trademarks or 
trademarks of the manufacturers who developed the system or 
product concerned. 
						

							This product is licensed under the AVC patent portfolio license for the personal and 
non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard 
(“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a 
personal and non-commercial activity and/or was obtained from a video provider licensed to 
provide AVC Video. No license is granted or shall be implied for any other use. Additional 
information may be obtained from MPEG LA, LLC. See http://www.mpegla.com
 .