Panasonic Dmc Fz1000 Owners Manual

							291
12. Using the Wi-Fi function
You can select the method for connecting to the device you 
are using.
Select the connection method  supported by your device.
Connecting from a location away from your house (direct connection)
[Wi-Fi Direct]
1Set the device to Wi-Fi DirectTM mode.
2Select [Wi-Fi Direct].3Select the device to connect to.
•Read the operating instructions of your device for details.
[WPS Connection][WPS (Push-Button)]
1Select [WPS (Push-Button)].2Set the device to WPS mode.
•You can wait longer for a connection by pressing the [DISP.] 
button on this unit.
[WPS (PIN code)]
1Select [WPS (PIN code)].2Enter the PIN code of the device into this unit.
[Manual Connection]
Enter the SSID and password into 
the device. The SSID and 
password are displayed on the 
connection waiting screen of this 
unit.
•
If the destination is [Smartphone], 
you can set up a connection by 
scanning the QR code with the smartphone.  (P256, 257)
•If you press [MENU/SET] on the camera, the QR code will be 
enlarged. When it is difficult to scan the QR code, try enlarging it. 
						

							12. Using the Wi-Fi function
292
When the Wi-Fi function is used, a record is saved in the history. You can register records 
as favorites.
Connecting from the history or favorites a llows you to easily connect with the same 
settings as the previous ones.
1Press [Wi-Fi].
2Select [Select a destination from History] or 
[Select a destination from Favorite].
3Select item.
1Press [Wi-Fi].2Select [Select a destination from History].
3Select the item you want to register to favorites, and then press  1.4Enter a registration name.
•For details on how to enter characters, refer to “Entering Text” section on  P55.•A maximum of 30 characters can be entered. A two-byte character is treated as two 
characters.
Connecting quickly with the same settings as the previous ones 
([Select a destination from History]/[Select a destination from Favorite])
[Select a destination from 
History] Connects with the same settings as the previous ones.
[Select a destination from 
Favorite]Connects with settings registered as favorites.
Registering records as favorites 
						

							293
12. Using the Wi-Fi function
1Press [Wi-Fi].2Select [Select a destination from Favorite].
3Select the favorite item you want to edit, and then press  1.4Select the item.
•
Performing [Reset Wi-Fi Settings] clears the history and the contents saved in [Select a 
destination from Favorite].
•When connecting to a network to which many PCs are connected by using [Select a destination 
from History] or [Select a destination from Favorite], a connection attempt may fail because the 
previously-conn ected device will be identified  from among many devices.
If a connection attempt fails, reconnect by using [New Connection].
Editing the items registered to favorites
[Remove from Favorite] —
[Change the Order in 
Favorite]Select the destination.
[Change the Registered 
Name]•For details on how to enter characters, refer to “Entering 
Te x t” section on  P55.•A maximum of 30 characters can be entered. A two-byte 
character is treated as two characters.
Save frequently-used Wi-Fi connection settings as favorites
The number that can be saved in the history is limited.
We recommend that you save frequently-used Wi-Fi connection settings by registering 
them as favorites. (P292)
Checking the connection detail of the history or favorite
If [DISP.] is pressed when selecting an item in  the history or favorites, the detail of the 
connection can be displayed. 
						

							12. Using the Wi-Fi function
294
When sending images, select the method for sending them after selecting [New 
Connection].
After the connection has been completed, settings for sending, such as the image size for 
sending, can also be changed.
∫Images that can be sent
¢1 Sending by [Send Images While Recording] is not available.
¢ 2 A motion picture recorded in [AVCHD] can be sent to [PC] if the file size is 4 GB or smaller. It 
cannot be sent if the size is greater than 4 GB.
¢ 3 Excluding motion pictures recorded with their size set to [4K] in [Rec Quality]
•Some images may not be played back or sent depending on the device.
•Refer to the manual of the destination equipment or the web service for more information on 
how to playback pictures.
About settings for sending images
DestinationJPEGRAWMP4¢1AVCHD¢1, 2
[Smartphone] ±—±¢3—
[PC] ±±±±
[Cloud Sync. Service] ±—±
¢3—
[Web service] ±—±
¢3—
[AV device] ±———
[Printer]
¢ 1± ——— 
						

							295
12. Using the Wi-Fi function
A picture can be automatically sent to a  specified device every time you take it.
•Since the camera gives priority to recording,  sending may take longer during the recording.
•When connected with [Send Images While Recording], [ ] is 
displayed on the recording screen, and [ ] is displayed while 
sending a file.
•If you turn off this unit or the Wi-Fi connection before sending is 
complete, unsent pictures will not be resent.
•You may not be able to delete files or use the playback menu 
while sending.
Not available in these cases:
•
Motion pictures cannot be sent.
Images can be selected and sent after recording.
•
Details of the playback menu [Favorite] or [Print Set] settings will not be sent.
Not available in these cases:
•
Some images taken with a different camera may not be able to be sent.•Images that have been modified or edited with a computer may not be able to be sent.
Send Images While Recording
Send Images Stored in the Camera
55 
						

							12. Using the Wi-Fi function
296
Pressing [DISP.] after completing a connection  allows you to change the settings for 
sending such as the image size for sending.
¢ 1 Only available when the destination is set to [Web service].
¢ 2 Only available when the destination is set to [PC].
¢ 3 Only available when the destination is set to [Cloud Sync. Service] or [Web service].
¢ 4 Only available when the destination is set to [Cloud Sync. Service].
Changing the settings for sending images
[Size] Resize the image to send.
[Original]/[Auto]
¢
1/[Change]•If you select [Auto], the image size is determined by the 
circumstances at the destination.
•You can select the image size for [Change] from [M], [S] or [VGA].
The aspect ratio does not change.
[File Format]¢2[JPG]/[RAW iJPG]/[RAW]
[Delete Location 
Data]¢ 3
Select whether to delete the location information from images before 
sending them.
[ON]: Delete the location information, then send.
[OFF]: Keep the location information and send.
•This operation only deletes the location information from the images 
that are set to be sent.
(The location information will not be deleted from the original images 
stored in this unit.)
[Cloud Limit]¢4
You can select whether to send images when the Cloud Folder runs 
out of free space.
[ON]: Do not send images.
[OFF]: Delete images from the oldest ones, then send new 
images. 
						

							297
12. Using the Wi-Fi function
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Select the menu.
•
Refer to P283 for details.
•For details on how to enter characters, refer to “Entering Text” section on  P55.
•If you are using the PC with standard settings, you do not need to change the workgroup.
> [Setup]  > [Wi-Fi]  > [Wi-Fi Setup]  > Desired item to be set
[LUMIX CLUB]Acquires or changes the “LUMIX CLUB” login ID.
[PC Connection]
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as 
the destination PC is required.
(The default setting is “WORKGROUP”.)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
Exit the menu after it is set.
[Restore to Default]:
Restores the default state.
Confirmation screen is displayed. It is executed when [Yes] is 
selected.
Exit the menu after it is executed.
[Device Name]
You can change the name of this unit.
1Press [DISP.].
2Enter the desired device name.
•For details on how to enter characters, refer to “Entering Text” 
section on  P55.
•A maximum of 32 characters can be entered.
[NFC Operation]
Configures the settings for the NFC function.
[ON]:
NFC function is worked.
[OFF]
MENU 
						

							12. Using the Wi-Fi function
298
•For details on how to enter characters, refer to “Entering Text” section on  P55.•Make a copy of password.
If you forget the password, you can reset it with [Reset Wi-Fi Settings] in the [Setup] menu, 
however other settings will also be reset. (excluding [LUMIX CLUB] )
•A “MAC Address” is a unique address that is used to identify network equipment.
•“IP address” refers to a number that identifies a PC connected to a network such as the 
Internet. Usually, the addresses for homes are automatically assigned by the DHCP function 
such as a wireless access point. (Example: 192.168.0.87)
¢ [Approved Regulations] is only available on the version DMC-FZ1000P.
[Touch Sharing]
Sets the camera operation after the connection with the NFC 
function is complete.
[ON]:
When a Wi-Fi connection is complete by using the NFC function 
during single picture playback, the single picture can be 
transferred.
[OFF]
[Wi-Fi Password]
To prevent incorrect operation or use of the Wi-Fi function by a 
third party and to protect saved personal information, it is 
recommended that you protect the Wi-Fi function with a 
password.
Setting a password will automatically display the password input 
screen when the Wi-Fi function is used.
[Setup]:
Enter any 4-digit numbers as the password.
[Delete]
[Network Address]Displays the MAC address and IP address of this unit.
[Approved 
Regulations]¢The technical compliance standard authentication number is 
displayed. 
						

							299
13.Connecting to other equipment
Enjoying Motion Pictures in 4K
∫ Playing Back on a TV Screen
By connecting the camera to a TV that supports motion pictures in 
4K and playing back motion pictures recorded with their size set to 
[4K] in [Rec Quality], you can enjoy finely-detailed motion pictures 
in 4K. Even though the output resolution will be lower, you can also 
play them back by connecting the camera to  a TV that does not support motion pictures in 
4K.
Connect the camera and a 4K-compatible TV with an HDMI micro cable, 
and display the playback screen.  (P301)
•When [VIERA Link] is set to [ON] and the camera is connected to a TV supporting VIERA Link, 
input of the TV will be switched automatically  and playback screen will be displayed. Refer to 
P304  for details.
•When you have motion pictures recorded with [Rec Format] set to 
[MP4] and their size set to [4K] in [Rec Quality], you can also play 
them back by inserting the card into the SD card slot of a TV that 
supports motion pictures in 4K.
•Read the operating instructions for the TV.
∫Watching on a PC
To play back motion pictures recorded with their size set to [4K] in [Rec 
Quality] on a PC, use the software “ PHOTOfunSTUDIO ” on the DVD 
(supplied).
•
To play back and edit motion pictures in 4K, you need a high-performance PC 
environment.
•Refer to the operating instructions of “ PHOTOfunSTUDIO ” (PDF).
∫ Storing on a PC
You can acquire recorded pictures to a  PC by connecting the camera and the PC.
Refer to  P306 for details.
Watching motion pictures in 4K
Preparation: If the size is [4K], set [HDMI Mode (Play)]  (P52) to [AUTO] or [4K].
Storing 4K motion pictures 
						

							13. Connecting to other equipment
300
∫Storing on a DVD or CD
You cannot dub motion pictures recorded with their size set to [4K] in [Rec Quality] to 
Blu-ray discs and DVDs with Panasonic recorders. (As of June 2014)
With the “ PHOTOfunSTUDIO ” software on the DVD (supplied), you can convert 4K motion 
pictures into smaller sized motion pictures  or copy 4K motion pictures to a DVD or CD.
•
Refer to the operating instructions of “ PHOTOfunSTUDIO ” (PDF).