Panasonic High Speed Color Scanner Kvs7065c Operating Instructions

							41
Specifications
≥“Weight in pounds” of paper represents the weight of 500 [432k559 mm (17k22 inches)] sheets.
Item
Model No.KV-S7065C
ScannerScanning face Duplex scanning
Scanning method CIS (Contact-type color Image Sensor)
Readout
speedFlatbed 0.704 sec (Letter, 200 dpi) 320 µsec/line
ADF Simplex scanning:
Approx. 60 sheets/min. (Letter, fed lengthwise, 200 dpi)
Approx. 60 sheets/min. (A4, fed lengthwise, 200 dpi)
Duplex scanning:
Approx. 50 sheets/min. (Letter, fed lengthwise, 200 dpi)
Approx. 50 sheets/min. (A4, fed lengthwise, 200 dpi)
Resolution Flatbed/ADF Main scanning direction: 100-600 dpi (1 dpi step)
Sub-scanning direction: 100-600 dpi (1 dpi step)
The optical resolution is 600 dpi.
Tonal gradation Binary mode, Grayscale mode (8 bit), 64-step gradation 
(dither) mode, Error diffusion mode
Image control Image emphasis, Dynamic Threshold, Automatic 
separation, Invert, White level from paper
Paper Size for Flatbed ~ 297k432 mm (11.7k17 in.)
Size for ADF Scanning size: 48k70 mm (1.9k2.8 in.)~
297 mm (11.7 in.)k635 mm (25 in.)
Thickness for ADF 0.05 to 0.15 mm (2.0 to 5.9 mils)
Business card: Thicker than 0.15 mm (5.9 mils)
Note: 1 mil = 1/1000 in.
Weight for ADF 40 to 127 g/m
2 (10.6 to 34 lbs.)
Business card: Thicker than 127 g/m2 (34 lbs.)
Hopper capacity 200 sheets [64 g/m
2 (17 lbs.)]
UnitExternal dimensions 
(WidthkDepthkHeight)755k508k289 mm (29.7k20k11.4 in.)
Mass (Weight) 29 kg (64 lbs.) 
Power requirement AC100–120 V 50/60 Hz AC220–240 V 50/60 Hz
Power
consumption
Maximum
(Scanning)1.5 A (AC100–120 V) 0.7 A (AC220–240 V)
Minimum (Standby)0.6 A (AC100–120 V) 0.3 A (AC220–240 V)
Sleep mode 8 W (AC100–120 V) 8 W (AC220–240 V)
Operating
EnvironmentOperating temperature and 
humidity15 °C to 30 °C (59 °F to 86 °F), 30% to 80% RH
Storage
EnvironmentStorage temperature and humidity 0 °C to 35 °C (32 °F to 95 °F), 10% to 80% RH
OptionRoller exchange kit (KV-SS015), Imprinter unit (KV-SS014), Ink cartridge (KV-SS021), 
Roller cleaning paper (KV-SS03) 
						

							42
Troubleshooting
If a problem occurs while the unit is being used, check the following items and check the scanner status with the User
Utility. If the unit still malfunctions, turn it OFF, unplug the power cord and call for service.
SymptomPossible CauseRemedy
The LED does not light when
the power switch is turned
ON.The power cord is not plugged in. Insert the power plug firmly.
Problem with power supply.Disconnect the scanner from the
electric outlet and call for service.
The computer does not
recognize the scanner.The scanner is not connected to the
computer correctly.Connect the cables correctly.
The scanner is not registered 
correctly.Uninstall the scanner from the
computer. 
Register the scanner hardware again.
(Refer to the Installation Manual on
pages 18 and 19.)
SCSI 
connectionThe computer cannot recognize the
SCSI card.Check your computer whether the
SCSI card is installed correctly using
the device manager’s property. Refer
to the Installation Manual on page 17.
The same ID number is used for the
scanner and the other device.Use the different SCSI ID numbers for
each devices. (See page 13.)
The scanner was turned on after the
computer was turned on.Turn the computer OFF. Turn the
scanner ON, and then turn the
computer ON again.
USB  
connectionThe USB interface of the computer is
not installed correctly.Check the computer whether the USB
interface of your computer is installed
correctly using the device manager’s
property.
The scanner is connected via USB
hub.Do not connect via USB hub.
The cable without High-Seed logo is
used.Use the cable with High-Speed logo.
Scan speed is slow at USB
connection.The scanner is connected with USB
1.1.Connect with USB 2.0.
The ADF does not open
when the ADF door release
is pushed.The ADF door is not closed properly.Push the ADF door release again after
you close the ADF door until it is
locked.
(ADF)
The document has been
loaded on the hopper tray.
But the scanner does not
start scanning.The document is not loaded 
properly.Load the document correctly.
(See page 14.)
The sensor cannot detect the
document as the edge of the document
is curled.Flatten the document and load it again. 
						

							Troubleshooting
43
(ADF)
Double feeding problems
occurs frequently or the
scanner stops loading while
scanning.The rollers are dirty. Clean all of the rollers. (See page 27.)
The rollers have reached their life
expectancy.Replace the paper feed roller module
and the retard roller module. (See
page 35 and page 37.)
The document is curled or folded.Flatten the document and load it again
after reducing the pages.
The irregular type document is to be
scanned.Make a copy of the document on
specified paper (see page 14) and
scan the copy.
The document has a length of less
than 70 mm (2.75 in.).Make a copy of the document on paper
of the specified size and scan the copy.
(See page 14.)
(ADF)
Scanned image is aslant.The document guides are not adjusted
to the size of the document to be
scanned.
The document to be scanned is set
aslant on the hopper tray.Adjust the document guides properly to
the size of the document to be
scanned.
Right and left sides of the document to
be scanned are not the same in height,
because of curl and fold.Remove curl and fold then reduce the
amount of the document.
(ADF)
The scanned document is
blank.The document to be scanned was
loaded face down (upside down).Load the document correctly. 
(See page 17.)
Vertical lines appear on the
scanned document.The ADF glasses and flatbed glass are
dirty.Clean the ADF glasses and flatbed
glass. (See page 31.)
The reference plate and flatbed sheet
are dirty.Clean the reference plate and flatbed
sheet. (See page 31 and page 34.)
The scanning density is
uneven.The ADF glass, reference plate, flatbed
glass and flatbed sheet are dirty.Clean the ADF glass, reference plate,
flatbed glass and flatbed sheet. (See
page 31 and See page 34.)
The quantity distribution of light varies.Adjust shading. Please refer to section
4.6 of a user utility reference manual.
The color of the scanned
document is extremely
different from the original
document.The settings of the computer monitor is
wrong.Adjust the computer monitor settings.
Dark spots or noise appear
on the scanned documents.The ADF glass, reference plate, flatbed
glass and flatbed sheet are dirty.Clean the ADF glass, reference plate,
flatbed glass and flatbed sheet. (See
page 31 and See page 34.)
Scanned image has moire
fringes such as stripe or
wavy pattern noise.It is caused by printing pattern of the
document and the congeniality of the
scanning resolution.Please use the moire reduction
function or change the resolution and
try to scan.
SymptomPossible CauseRemedy 
						

							44
Pag e Pa ge
Index
A
AC inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Acceptable documents . . . . . . . . . . . . . . . 14
Accessories  . . . . . . . . . . . . . . . . . . . . . . . 26
ADF door  . . . . . . . . . . . . . . . . . . .  10, 24, 27
ADF door release . . . . . . . . . . . . . 10, 24, 27
ADF glass . . . . . . . . . . . . . . . . . . . . . .  11, 31
B
Back stopper . . . . . . . . . . . . . . . . . . . . . . . 10
Blower . . . . . . . . . . . . . . . . . . . . . .  32, 33, 34
C
CD-ROM . . . . . . . . . . . . . . . . . . . . . . 1, 9, 40
Cleaning the unit . . . . . . . . . . . . . . . . .  26–34
Component identification  . . . . . . . . . . . . . 10
Control sheet  . . . . . . . . . . . . . . . . . . . . . . 21
CPU  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
D
DIP switch . . . . . . . . . . . . . . . . . . . . . . . . . 13
Document cover . . . . . . . . . . . . . . . . . 10, 23
Document cover detector . . . . . . . . . . . . . 34
Document feeder  . . . . . . . . . . . . . . . . . . . 24
Document guide . . . . . . . . 10, 14, 15, 17, 18
Documents to avoid  . . . . . . . . . . . . . . . . . 14
Double feed detector  . . . . . . . . . . . . . . . . 32
Drive rollers. . . . . . . . . . . . . . . . . . . . .  29, 30
E
Ending sensors . . . . . . . . . . . . . . . . . . . . . 33
Energy Star . . . . . . . . . . . . . . . . . . . . . . . . . 2
Exit door . . . . . . . . . . . . . . . . . . . . 10, 22, 25
Exit door release . . . . . . . . . . . . . . 11, 22, 33
Exit rollers . . . . . . . . . . . . . . . . . . . . . . . . . 30
Exit stopper . . . . . . . . . . . . . . . . . . . . . . . . 10
Exit tray . . . . . . . . . . . . . . . . . . . . . . . . 10, 14
External dimensions . . . . . . . . . . . . . . . . . 41
F
FAN exhaust vent  . . . . . . . . . . . . . . . . . .  10
Fan exhaust vent . . . . . . . . . . . . . . . . . . .  26
Flatbed . . . . . . . . . . . . . . . . . . . . .  19, 23, 41
Flatbed glass . . . . . . . . . . . . . . . .  11, 26, 34
Flatbed sheet . . . . . . . . . . . . . . . .  11, 23, 34
Free rollers . . . . . . . . . . . . . . . . . . . . .  29, 30
H
Hopper . . . . . . . . . . . . . . . . . . . . . . . .  10, 16
Hopper extension tray  . . . . . . . . . . . .  10, 16
Hopper tray  . . . . . . . . . . . . . . . . .  10, 14, 19
I
Image control . . . . . . . . . . . . . . . . . . . . . .  41
Imprinter door. . . . . . . . . . . . . . . . . . . . . .  10
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
L
Landscape . . . . . . . . . . . . . . . . . . . . . . . .  17
LED  . . . . . . . . . . . . . . . . . . . . . . . . . .  12, 42
Limit mark  . . . . . . . . . . . . . . . . . . . . . . . .  17
Loading Documents . . . . . . . . . . . . . .  14, 19
M
Manual feed selector . . . . . . . . . .  10, 16, 18
Memory  . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
Multiple sheets . . . . . . . . . . . . . . . . . . . . .  15
N
Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
O
Operating Environment  . . . . . . . . . . . . . .  41
Option  . . . . . . . . . . . . . . . . . . . . . . . . . . .  41
OS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2 
						

							Index
45
Pag e Pa ge
P
Paper  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Paper feed roller . . . . . . . . . . . . . . . . . 27, 35
Paper jams . . . . . . . . . . . . . . . . . . . . . . . . 24
Paper sensor  . . . . . . . . . . . . . . . . . . . . . . 32
Paper slot . . . . . . . . . . . . . . . . . . . . . . . . . 18
Portrait  . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Power consumption  . . . . . . . . . . . . . . . . . 41
Power cord . . . . . . . . . . . . . . . . . . . 4, 10, 40
Power indicator . . . . . . . . . . . . . . . . . . . . .  10
Power requirement . . . . . . . . . . . . . . . . . . 41
Power switch. . . . . . . . . . . . . . . . . . . .  10, 12
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 7
R
Reference plate  . . . . . . . . . . . . . . 11, 22, 31
Repacking . . . . . . . . . . . . . . . . . . . . . . . . . 40
Replacing Consumable. . . . . . . . . . . . . . . 35
Retard cover . . . . . . . . . . . . . . . . . 27, 28, 37
Retard roller  . . . . . . . . . . . . . . . . . . . .  27, 37
Roller cleaning paper  . . . . . . . . . . . . . . 6, 26
S
SCSI Connection  . . . . . . . . . . . . . . . . . . . . 2
SCSI connector. . . . . . . . . . . . . . . . . . . . . 10
SCSI ID setting . . . . . . . . . . . . . . . . . . . . .  13
Separation roller . . . . . . . . . . . . . . . . . . . . 27
Shading. . . . . . . . . . . . . . . . . . . . . . . . 39, 43
Specifications . . . . . . . . . . . . . . . . . . . . . . 41
Starting sensor . . . . . . . . . . . . . . . . . . . . . 33
STOP/START button  . . . . . . . . . . . . . . . . 10
System requirements  . . . . . . . . . . . . . . . . . 2
T
Top cover  . . . . . . . . . . . . . . . . . . . . . . . . .  10
Troubleshooting  . . . . . . . . . . . . . . . . . . . . 42
U
USB connection  . . . . . . . . . . . . . . . 2, 12, 13USB connector . . . . . . . . . . . . . . . . . . . . .  10
USB hub. . . . . . . . . . . . . . . . . . . . . . . .  2, 42
User utility  . . . . . . . . . . . . . . .  12, 28, 38, 39
W
Waiting sensor . . . . . . . . . . . . . . . . . . . . .  32 
						

							Panasonic Digital Document Company
A Unit of Matsushita Electric Corporation of America
Two Panasonic Way, Secaucus, New Jersey 07094
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
Matsushita Electric Industrial Co., Ltd.
http://www.panasonic.co.jp/global/
© 2004 Panasonic Communications Co., Ltd. All Rights Reserved.
E-040406