Panasonic Network Scan Functions Dp 190 Operating Instruction

							31
Making Copies
Number of
Copies
(Max. 999)
LT R: Letter-R
INV
: Invoice
INV
: Invoice-R
Exits this
mode.
Number of Copies
(Max. 999)
ANOTHER ORIGINAL?
1:YES  2:NO
NOTE
●An incorrect exposure may occur when
there is a black line at the edge of the
original or an image which the machine
interprets as a black pattern in this mode. The following steps, illustrate how to
make multiple copies when the Sort
Mode is selected. (See pages 24 and 38)
ANOTHER ORIGINAL?
1:YES  2:NO
1: YES Continues to copy another
original, repeat steps 1
and 4-     to step 7.
2: NO Starts making copies.
2
1: YES
    Go to next step.
NOTE:If “2: NO” is selected,
the machine will start
copying only 1-Sided
original.
3
8
5
9
6
23
4
Select Invoice or Invoice-R
as original direction. 
						

							32
Making Copies
■ Energy Saver (Power Saver Mode, Sleep/Shutdown Mode)
These modes save power while the machine is not in use.
To enter
To exit
orAutomatically enters
the Power Saver Mode
after 10 minutes from
the last copy job.
NOTE:
To adjust the default
Power Saver Mode
timer, see page 36.
Automatically enters the Sleep/
Shutdown Mode after 10 minutes
from the last copy job.
NOTE:
To adjust the default Sleep/Shutdown
Mode timer, see page 36.
Flashes :
Power Saver
Mode
To exit
Lights :
Sleep/Shutdown
Mode
Power Saver Mode
Sleep/Shutdown Mode
or any keys
■ Multi-Size Feeding
Use this function when copying mixed (Legal & Letter)
size originals through the ADF. The originals size is
automatically detected and copied full size.
This function is available only when the optional Tray-2
is installed and both Legal and Letter-R size papers are
loaded in Tray-1 and Tray-2 respectively.
NOTE:
1. The default original size is LETTER. If you use the
Multi-Size Feeding function, change the default
original size to MIX in the Copier Settings,
Parameter No. 13 (ORIGINAL SIZE).
(See page 39)
2. Multi-Size Feeding cannot be combined with other
copy functions (except Zoom and Sort mode).
Multi-Size Feeding
Combination
LETTER-R LEGAL
Original Copy
Legal Legal
Letter-R Letter-R
Other Features
Modes Power Consumption Warm Up Time Limited Functions
Normal Operation Approx. 80 W – –
Power Saver Approx. 20 W Approx. 10 sec. –
Sleep Approx. 12 W Approx. 15 sec. –
Shutdown Approx. 1.5 W Approx. 18 sec.
●Printer Function
(USB Local and Network Connection)
●Internet Fax/Email Function
●Facsimile Function
(If the LAN Cable is not connected, and
the DHCP DEFAULT is set to VALID,
while in this mode (Shutdown), the
machine will not answer an incoming
Fax call) (See page 37)
NOTE:When making copies (especially colored originals),  the image may vary depending on the background
color of the original(s).
1
1
1
2
2 
						

							33
Making Copies
Number of
Copies
(Max. 999)
For Variable Zoom Ratios only
Up to 200% in 1%
Down to 50% in 1%
MIX 
 :
Letter-R  and Legal
■  Job Memory
Copy Job can be stored in Memory (M1) for recall at a later time.
● Job Memory mode will not be deleted even if the power switch is turned O\
ff.
To  store a job in memory
Set up the
copy job to
be stored.
To recall a job stored in memory
A
B
C
or
Number of
Copies
(Max. 999)
234
1
12
23
3
2
1
Select the original size
with the Original Size Key. 
						

							34
Function
General
Settings
General
Settings for
Key OperatorCopier
Settings
Copier
Settings for
Key OperatorPrinter
Settings
Printer
Settings for
Key OperatorFax/Email
SettingsScanner
Settings
Input Key Operator Password 
(See page 13)
General Settings:Changing the Initial Machine Modes
●Power On Default Mode, Key Operator Mode, etc.
(See page 36)
For Key Operator:
Paper Size, Department Counter, Network TCP/IP
settings, etc.
(See pages 36 to 38)
■ Procedure
Select a
Function Mode
COPY :General/Copier
Settings
FAX/EMAIL :Fax/Email
Settings
SCAN/FILE :Scanner Settings
PRINT :Printer SettingsSelect a desired setting by pressing keys.
■ Using Function Modes to Change the Initial Machine Modes
NOTE●Please refer to the appropriate operating instructions manual for function settings on options.
●Function setting is accessible only when the machine is in Ready Mode.: General Settings
: Copier Settings
: Printer Settings
or
Scanner Settings
(Scan Parameters) (See page 50)
Fax/Email Settings
Refer to Operating Instructions
(For Fax and Internet Fax/Email)
12 
						

							35
Function
Exits this
Function
ModeWhen selecting the Key
Operator Mode:
(ex. General Settings)
09 KEY OPERATOR MODE
ENTER PASSWORD=_
Input the Key
Operator
Password (3-digit)
(See page 13) Select a mode with the Cursor
Key or Keypad.
Select a setting with the Keypad.
Confirm a setting with the SET Key.
Copier Settings:Changing the Initial Copy Modes
●Default function of each copy mode
(See page 38)
For Key Operator:
Original setting, Contrast, etc.
(See page 39)
Printer Settings:Changing the Initial Printer Modes
●Default function of each print mode
(See pages 39 and 40)
For Key Operator:
Job completion time, Page protection, Error page print, Spool
function, PS configuration, Font list print, Mailbox data
handling, etc.
(See pages 40 and 41)
NOTE:Normally, you have no need to set the Printer Settings.
When sending the text data from MS-DOS status to the
printer directly, such special printing may require Printer
Settings.
Scanner Settings:Changing the Initial Scanner Modes
●Original default setting, Compression mode, Resolution, etc.
(See page 41)
Fax/Email Settings:Changing the Initial Fax/Email Modes
Refer to Operating Instructions (For Facsimile & Internet Fax/
Email).
Exits this
Function
Mode Setting the desired
Function Parameter(s).
or
Setting the desired Function
Parameter(s).
Select a mode with the Cursor
Key or Keypad.
Select a setting with the Keypad.
Confirm the setting with the SET Key.
3
3
4
4
5
5
6 
						

							36
Function
00 POWER ON DEFAULT Selects the default operation mode. 1:COPY
1:COPY / 2:FAX / 3:PRINTER / 4:SCANNER
01 SORT MEMORY USAGE Selects whether to display the amount of sort 1:OFF
memory used on the control panel.
1:OFF / 2:DISPLAY
02 DEPT. COUNTER Displays the Total Copy usage and copy limit of
Consult your authorized
the selected department.service provider
04 TONER REPLACEMENTConfirms whether the Toner Cartridge is being replaced.Selecting 1:YES will reset the Print Counter.
1: YES / 2:NO
05 DRUM REPLACEMENT
Confirms whether the Drum Unit is being replaced.
Selecting 1:YES will reset the Drum Life Counter.
1:YES / 2:NO
06 SUPPLY FORMS
Select whether to print the Toner Cartridge or the
Drum Unit Order Form.
1:TONER / 2:DRUM
09 KEY OPERATOR MODE Inputs the key operator password.
ENTER PASSWORD = 
00 GENERAL LIST Prints the general settings list.
PRESS SET TO PRINT
01 PAPER SIZE Selects the Paper Tray and sets the Paper Size.
(See page 42)
1: TRAY-1 / 2:TRAY-2 (Option)
LETTER  →A4  →LEGALPAPER TYPE (LETTER/A4 size only/Tray-1)
1:PLAIN / 2:OHP
03 AUTO RESET TIME Selects the Control Panel reset time. 3:1 min.
1:OFF / 2:30 sec / 3:1 min. / 4:2 min. / 5:3 min. /
6:4 min.
04 ENERGY SAVER MODE Sets the Energy Saver mode and time. 3:SLEEP
1:INVALID / 2:POWER SAVER / 3:SLEEP /
4:SHUTDOWN
Power Saver mode timer: 1-240 min.
Sleep/Shutdown mode timer: 1-240 min.
05 ENERGY SAVER TIME Sets the energy saver timer (power saver mode) Start00:00
Start (ON): 00:00    End (OFF): 00:00 End00:00
Inputs Start and End time with Cursor Keys and
Keypad. Once you set power saver ON/OFF timer,
set timer repeats everyday.
06 LANGUAGE DEFAULT Selects the default message language for the 1:A-ENGLISH
display.
1:A-ENGLISH / 2:C-FRENCH / 3:SPANISH
07 SPECIAL TRAY 1*
Selects the paper tray to use for special paper. 1:NONE
1:NONE / 2:TRAY-1 / 3:TRAY-2 (Option) /
4:BYPASS
09 KEY/TOUCH BEEP Selects the default touch panel sound level. 2:SOFT
1:OFF / 2:SOFT / 3:LOUD
■ General Settings
No.
Modes FunctionInitial
Setting
The following Parameter Settings require the input of the Key Operator Password:
■ General Settings (For Key Operator)
No.
Modes FunctionInitial
Setting
*
Available only when the optional Tray-2 is installed.
NOTE:When inputting above General Settings mode No., no need to input the first 0, input only the second number
of the two digit display. 
						

							37
Function
11ORIG. SET BEEP ADF Selects whether to enable the sound when 2:VALID
paper is placed on the ADF.
1:INVALID / 2:VALID
13 DEPT. COUNTER MODE Monitors the copy usage of each department. Consult your
1: TOTAL COUNTER authorized
2: DEPT. COUNTER service provider
3: DEPARTMENT LIST
16 LANGUAGE PRIORITY
Selects whether to enable the language selection1:OFF
menu to display when the machine comes out of
the Energy Saver Mode, or when the RESET
button is pressed once.
1:OFF / 2:ON
17 DATE & TIME Sets the date and time.
Month, Day, Year, Time
Input the date and time using the Cursor Keys
and the Keypad.
18 DAYLIGHT TIME
Selects whether to enable the daylight time feature.2:VALID
1:INVALID / 2:VALID
19 IP ADDRESS  (DHCP)*
1,*2Displays the address which was reserved by
DHCP server.
20 SUBNET MASK (DHCP)*
1,*2Displays the address which was reserved by
DHCP server.
21 DEF. G/W IP (DHCP)*
1,*2Displays the address which was reserved by
DHCP server.
22 DHCP DEFAULT*
4Selects whether to enable the DHCP. 2:VALID
1:INVALID / 2:VALID
23 DNS SERVER ADDR*
2Selects whether to enable the DNS Server, and 2:VALID
sets its settings for Internet Fax/Email Function.
1:INVALID
2:VALID
   
1:HOST NAME / 2:DOMAIN NAME /
3:PRI. DNS SERVER (IP ADDRESS1) /
4:SEC. DNS SERVER (IP ADDRESS2)
24 MAC ADDRESS Indicates the MAC address.
25 HARD DISK FORMAT*3Formats the hard disk.
26 HARD DISK ERR CHK*3Selects the provision for the hard disk error check.
27 ABBR GROUP ID Inputs the group ID for the address book. 0
0-99
28 COMMUNITY NAME(1)*
2Selects whether to change the Community public
Name(1) SNMP.
Enables read only.
29 COMMUNITY NAME(2)*
2Selects whether to change the Community public
Name(2) SNMP.
Enables read/write.
■ General Settings (For Key Operator) (Continued)
No.
Modes FunctionInitial
Setting
NOTE*
1When setting other than DHCP server Network settings, Parameter No. “22 DHCP DEFAULT” should be set to “INVALID”
first, then setup Parameter No.19 to 21.
*2When Parameter No.19 to 23 (except 22) and No. 28, 29 are set, cycle the power by turning the Power Switch on the Left
Side of the machine OFF and ON.
*3Available only when the optional Hard Disk Drive Unit is installed.*4When not connecting to LAN, the setting of DHCP should be on INVALID. When the setting of DHCP is on VALID,
and the machine is in Shutdown Mode, the machine will not answer an incoming Fax call. 
						

							38
Function
04 2-SIDED MODE DEF. Selects the default duplex priority mode. 1:OFF1:OFF / 2:1→2 / 3:2 →2
05 N in 1 DEF. Selects the N in 1 default mode. 1:ORIENTATION
Procedures: Select a Function
    
               (ex: ORIENTATION) then, select a
    For
               Sub Function (ex: PORTRAIT)
    LEGAL/LETTER
1:ORIENTATION
      1:PORTRAIT
When selecting orientation, there are original
    For INVOICE
sizes, LEGAL     , LETTER     , INVOICE   ,
      2:L-SCAPE
and INVOICE    . You can change the original 2: LAYOUT
size with            of cursor key.
    

    1: 2 in 1
1:PORTRAIT         / 2:L-SCAPE
    
2:LAYOUT
    1: L →R

1:  2 in 1 / 2:  4 in 1 
1:L →R / 2:R →L

1: 
12
34 / 2: 13
24 / 3: 21
43 / 4: 31
42
06 N in 1 WITH FRAME *2Selects whether to create the blank space 1:INVALID
between copy images.
1:INVALID / 2:VALID
*2 
A vailable only for 2 in 1 mode.
07 DIGITAL SKYSHOT Selects the default digital skyshot mode. 1:OFF
1:OFF / 2:ON
09 AUTO EXPOSURE Sets the auto exposure setting. 2:VALID
1: INVALID / 2: VALID
10 SORT PRIORITY ADF Selects the sort priority when using the ADF. 2:SORT
1:NON-SORT / 2:SORT
11 SORT PRIOR. GLASS Selects the sort priority when using the Platen. 1:NON-SORT
1:NON-SORT / 2:SORT
12 1→2 BINDING DEF. Selects the binding location for 1 →2 Copy. 1:LONG EDGE
1:LONG EDGE / 2:SHORT EDGE
13 2 →1 BINDING DEF. Selects the binding location for 2 →1 Copy. 1:LONG EDGE
1:LONG EDGE / 2:SHORT EDGE
19 KEY OPERATOR MODE Inputs the key operator password.
ENTER PASSWORD = 
■  General Settings (For Key Operator) (Continued)
No.
Modes Function Initial
Setting
■  Copier Settings
30 DEVICE NAME *1Inputs the device name when required.Panasonic DP-190
(For Status Monitor/EtherTalk Machine Name)
31 DEVICE LOCATION *
1Inputs the device location when required.
(For Status Monitor)
No.
Modes Function Initial
Setting
NOTE*1When Parameter No 30 and 31 are set, cycle the power by turning the Powe\
r Switch on the Left Side of the
machine OFF and ON. 
						

							39
Function
00 COPY SETTING LIST Prints the copier settings list.
PRESS SET TO PRINT
01 ORIGINAL (HOME) Selects the default Halftone setting. 2:TEXT/PHOTO
1:TEXT / 2:TEXT/PHOTO / 3:PHOTO
02 TEXT CONTRAST Selects the contrast setting for the Text mode. 3
1-5
03 T/P CONTRAST
Selects the contrast setting for the Text/Photo mode.3
1-5
04 PHOTO CONTRAST Selects the contrast setting for the Photo mode. 3
1-5
05 MAX. COPY SETTING Determines the maximum number of copies/ 999
sets allowed to be copied.
1-999
08 MEM. FULL  ACTION
Selects the action to take during memory full condition.1:PRINT
1:PRINT / 2:CANCEL
09 TONER SAVE (TEXT) Selects the toner save in Text mode. 1:OFF
1:OFF / 2:ON
10 TONER SAVE (T/P) Selects the toner save in Text/Photo mode. 1:OFF
1:OFF / 2:ON
11TONER SAVE (PHOTO) Selects the toner save in Photo mode. 1:OFF
1:OFF / 2:ON
13 ORIGINAL SIZE Selects the default original size setting. LTR
LTR / INV   / INV     / LGL / MIX
(LTR: Letter, INV: Invoice, LGL: Legal,
MIX: Letter and Legal)
00 NUMBER OF PRINTS Sets the initial number of prints 1
1-999
01 PAPER SIZE Sets the paper size setting. LETTER
LETTER / INVOICE / FLS1 / FLS2 / A4 /
B5 / A5 / LEGAL
Sheet Bypass only: INVOICE, B5, A5, FLS1/FLS2
02 PAPER TRAY Sets the default Paper Tray setting. AUTO
AUTO / BYPASS / TRAY-1 / TRAY-2 (Option)
03 PRINT DIRECTION Sets the default print direction setting. 1:PORTRAIT
1:PORTRAIT / 2:L-SCAPE
04 PRINT DATA Determines the provision of the print data.
PRESS SET TO PRINT
The following Parameter Settings require the input of the Key Operator Password:
■ Copier Settings (For Key Operator)
No.
Modes FunctionInitial
Setting
■ Printer Settings
No.
Modes FunctionInitial
Setting
 
						

							40
Function
05 2-SIDED PRINT Selects whether the 2-Sided print setting is 1:OFF
enabled.
1:OFF / 2:ON
06 BIND POSITION Sets the bind position. 1:LONG EDGE
1:LONG EDGE / 2:SHORT EDGE
07 RESOLUTION Sets the resolution setting. 2:600dpi
1:300dpi / 2:600dpi / 3:1200dpi
08 FONT (PCL)*1 Sets the PCL font. 0
0-99
09 SYMBOL TABLE (PCL)*
1Sets the PCL symbol table. 11
0-35
10 PITCH (PCL)*
1Sets the PCL pitch. 10.00
0.44-99.99
11POINT SIZE (PCL)*
1Sets the PCL point size. 12.00
4.00-999.75
12 LINES/PAGE (PCL)*
1Sets the PCL lines/page. 60
5-128
13 RETURN CHARACTER (PCL)*
1Sets the PCL return character. 1:CR
1:CR / 2:CR+LF
14 MUTUAL A4/LETTER Selects whether the mutual size A4/LETTER is 1:OFF
enabled.
1:OFF / 2:ON
15 MAILBOX MEMORY*
2Indicates the mailbox memory status.
19 KEY OPERATOR MODE Inputs the key operator password.
ENTER PASSWORD = 
■ Printer Settings (Continued)
No.
Modes FunctionInitial
Setting
00 PRINTER SETTINGS Prints the printer settings.
PRESS SET TO PRINT
01 COMPLETION TIME Sets the job completion time setting. 180SEC
1-999SEC (second)
02 PAGE PROTECTION Selects whether to enable automatic 1:OFF
compression when the received data exceeds
the page memory capacity.
(This is accomplished by reducing resolution,
and/or deleting pixels to fit the data onto the
available page memory, then print it out.)
When the setting is in the OFF position, upon
exceeding the page memory capacity, the print
job is deleted and an Error message is displayed.
1:OFF / 2:ON
The following Parameter Settings require the input of the Key Operator Password:
■ Printer Settings  (For Key Operator)
No.
Modes FunctionInitial
Setting

*1Available only when the optional Printer Controller Module is installed.
*2Available only when the optional Hard Disk Drive Unit is installed.