Panasonic Pt D9610U Projector User Manual

61
Screen examples for different size settings (For PT-D9610U)
INPUT 
PICTURE
Default
Through
H-Fit
V-Fit
HV-Fit85
¢640·400£43
¢1152·864£54
¢1280·1024£
SIZE
SETTING
The picture is displayed at 
maximum size while maintaining 
the original aspect.
* If the picture extends outside the screen, the top-left corner is used as the reference point. 

62
Power up function
The projector is provided with a power up function which allows the performance of the lamp to be utilized to the
maximum level.
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select OPTION.
Press the ENTER button. ... The OPTION screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select LAMP POWER.
Press the LEFT ( ) and RIGHT ( ) arrow buttons to select HIGH (power up)
setting in LAMP POWER mode....

This equipment has 3 mode types for adjusting to the use environment.
Switching procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select OPTION.
Press the ENTER button. ... The OPTION screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select CONTRAST MODE.
Press the LEFT ( ) and RIGHT ( ) arrow buttons to select the mode.
Press the MENU button twice.
• The on-screen display will disappear and the screen will return...

When receiving 480i with analog component signal YCbCr input, it is possible to switch Cb, Cr input.
Switching procedure 
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select PICTURE.
Press the ENTER button. ... The PICTURE screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select FORMAT.
Press the LEFT ( ) and RIGHT ( ) arrow buttons to switch signal format.
• Switching is done with the SMPTE and BETACAM toggle.
• This...

65
Displaying a test pattern
17 types of test pattern are built in. These test patterns can be used to check the various adjustment settings.
Use the following procedure to display a test pattern.
•These test patterns cannot reflect the adjustment results of various picture settings such as picture
quality, positions, and sizes. Be sure to project an external input signal for various adjustments. 
Operating procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN...

66
Displaying the projector settings
Display procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP  ( ) and DOWN ( ) arrow buttons to select OPTION.
Press the ENTER button. ... The OPTION screen will be displayed.
Press the UP  ( ) and DOWN ( ) arrow buttons to select  SYSTEM
INFORMATION.
Press the ENTER button. ... The SYSTEM INFORMATION screen will be
displayed.
Firmware version number
Cumulative lamp usage time (normal mode)
Cumulative lamp usage time (HIGH mode)...

67
Adjusting the edge blending
Adjustment procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select POSITION.
Press the ENTER button. ... The POSITION screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select EDGE BLENDING.
Press the ENTER button. ... The EDGE BLENDING screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select designate the area 
to blend.
• If blending the upper part : set...

68
Adjusting the color matching
The projector is equipped with color matching adjustment functions to adjust color balance when using several
units in combination.
Adjustment procedure 
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select PICTURE.
Press the ENTER button. ... The PICTURE screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select COLOR MATCHING.
Press the LEFT ( ) and RIGHT( ) arrow buttons to turn ON....

69
This projector is provided with an ID number function, so that if multiple projectors are being used together, the
projectors can be controlled all at once or separately using a single remote control unit.
Because the factory pre-setting of the ID number is ALL, using only one projector do not require this setting.
Setting ID numbers
Setting procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP( )and DOWN( ) arrow buttons to select OPTION.
Press the ENTER button. ... The...

70
Setting remote control unit ID numbers
When an ID number has been assigned for a projector, you then need to assign the same ID number as the
projectors to be controlled to the remote control unit which is to be used to operate these projectors, otherwise the
remote control unit cannot be used.
Because the factory pre-setting of the projector ID number is ALL, using only one projector requires the use of the
ID ALL button on the remote control unit for this setting.
Setting method
Within 5 seconds of...