Ricoh Mp 6002 User Guide

							• Certain types of paper might not be detected properly when placed on the bypass tray. If thishappens, remove the paper and place it on the bypass tray again.
• Pull the extender out when loading A4
, 8 1
/ 2 × 11 or larger sheets in the bypass tray. Adjust
the extenders to match the width of the paper you load.
• When loading wide paper
• When loading narrow paper
• When the [Panel Key Sound] is turned off, it does not sound if you insert paper into the bypass tray. For details about [Panel Key Sound], see "System Settings", Connecting the Machine/ System
Settings
.
• If the machine stops detecting paper sizes while copying or printing, remove the paper and reload it.
• Specify the sizes of paper that are not automatically detected. For details about the sizes that can be detected automatically, see p.135 "Recommended Paper Sizes and Types". For details about
how to specify sizes, see p.130 "Settings to Use the Bypass Tray under the Printer Function",
"Copying from the Bypass Tray", Copy/ Document Server
.
• When loading thick paper, translucent paper, or OHP transparencies, specify the paper size and the paper type.
• Letterhead paper must be loaded in a specific orientation. See, "Loading Orientation-Fixed Paper or Two-Sided Paper", Paper Specifications and Adding Paper
.
Loading Paper into the Bypass Tray
129  CJV115 CJV116      
						

							Settings to Use the Bypass Tray under the Printer Function
• If you select [Machine Setting(s)] in [Bypass Tray] under [Tray Setting Priority] in [System] of thePrinter Features menu, the settings made using the control panel have priority over the printer driver
settings. For details, see "System", Print
.
• The default setting of [Bypass Tray] is [Driver / Command].
• Settings remain valid until they are changed. After printing, be sure to clear settings for the next user.
• For details about setting printer drivers, see "Printing Documents", Print
.
• [Auto Detect] is the default setting for [Printer Bypass Paper Size].
Setting the paper size using the control panel
1. Press the [User Tools/Counter] key.
2.Press [Tray Paper Settings].
3. Press [Printer Bypass Paper Size].
4. Select the paper size.
9. Adding Paper and Toner
130    CJS039   
						

							5.Press [OK].
6. Press the [User Tools/Counter] key.
• When loading thick paper or OHP transparencies, specify the paper size and the paper type.
Setting custom size paper using the control panel
1. Press the [User Tools/Counter] key.
2. Press [Tray Paper Settings].
3. Press [Printer Bypass Paper Size].
4. Press [Custom Size].
If a custom size is already set, press [Change Size].
5. Press [Vertical], enter the size of the paper using the number keys, and then press [
].
6. Press [Horizontal], enter the size of the paper using the number keys, and then press [
].
7. Press [OK] twice.
8. Press the [User Tools/Counter] key.
• When loading thick paper or OHP transparencies, specify the paper size and the paper type.
Setting thick paper or OHP transparencies using the control panel
• Use A4 or 8 1
/ 2 × 11 size OHP transparencies, and specify their size.
• When you load OHP transparencies, check the front and back of the sheets, and place them correctly.
• When printing onto OHP transparencies, remove printed sheets one by one.
Loading Paper into the Bypass Tray
131 CJS039           
						

							1.Press the [User Tools/Counter] key.
2.Press [Tray Paper Settings].
3. Press [
Next].
4. Press [Paper Type: Bypass Tray].
5. Select the proper items, according to the paper type you want to set.
• Press [OHP (Transparency)] on the [Paper Type] area when loading OHP transparencies.
• To load thick paper, press [Do not Display] on the [Paper Type] area, and then select the appropriate paper thickness in the [Paper Thickness] area.
6. Press [OK].
7. Press the [User Tools/Counter] key.
• We recommend that you use specified OHP transparencies.
• For details about paper thickness, see "System Settings", Connecting the Machine/ System Settings
.
9. Adding Paper and Toner
132CJS039      
						

							Loading Paper into the Large Capacity Tray
•(mainly Europe and Asia)
The LCT can hold A4
 paper only. If you want to print on 8 1
/ 2 × 11 or B5 JIS from the LCT,
contact your service representative.
•
(mainly North America)
The LCT can hold 8 1
/ 2 × 11
 paper only. If you want to print on A4 or B5 JIS from the LCT,
contact your service representative.
• The extension unit is required to load A4
, B4 JIS, 8 1
/ 2 × 14, or 8 1
/ 2 × 11.
1. Open the top cover of the LCT.
2.Load paper into the paper tray with the print side up and place it against the left side of
the tray.
Do not stack paper over the limit mark.
3. Press the [Down] key.
The key blinks while the bottom plate is moving down.
Loading Paper into the Large Capacity Tray
133             CJW108 CJW109   
						

							4.Load paper by repeating steps 2 and 3.
5. Close the top cover of the LCT.
9. Adding Paper and Toner
134CJW110   
						

							Recommended Paper Sizes and Types
This section describes recommended paper sizes and types.
• If you use damp or curled paper, a staple clogging or paper jam may occur.
• Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a misfeed.
• When you load OHP transparencies, check the front and back of the sheets, and place them correctly, or a misfeed might occur.
• For details about and recommendations concerning thick paper, see p.146 "Thick Paper".
Tray 1
Paper type and weightPaper sizePaper capacity52–169 g/m 2
 (14 lb. Bond–90 lb.
Index)
Plain Paper–Thick Paper 1
A4
8 1
/ 2 × 11
1,550 sheets × 252–169 g/m 2
 (14 lb. Bond–90 lb.
Index)
Plain Paper–Thick Paper 1*1
8 1
/ 2 × 11
A4
1,550 sheets × 2
*1
To load paper any of the sizes specified above, contact your service representative.
Tray 1 (A3/11 × 17 tray unit)
Paper type and weightPaper sizePaper capacity52–128 g/m 2
 (14–34 lb. Bond)
Plain Paper–Thick Paper 1
A3
11 × 17
1,000 sheetsRecommended Paper Sizes and Types
135               
						

							Paper type and weightPaper sizePaper capacity52–128 g/m2
 (14–34 lb. Bond)
Plain Paper–Thick Paper 1*1
A4, B4 JIS, 11 × 17
, 8 1
/ 2 × 14, 8 1
/ 2 × 11
A3, A4, B4 JIS,
8 1
/ 2 × 14
, 8 1
/ 2 × 11
1,000 sheets
*1
To load paper any of the sizes specified above, contact your service representative.
Tray 2
Paper type and weightPaper sizePaper capacity52–169 g/m 2
 (14 lb. Bond–90 lb.
Index)
Plain Paper–Thick Paper 1Paper sizes that can be
detected automatically:
A3
, A4, A5, B4 JIS
, B5 JIS, 11 × 17,
8 1
/ 2 × 14
, 8 1
/ 2 × 13,
8 1
/ 2 × 11
, 8 1
/ 4 × 13
, 8 × 13, 7 1
/ 4 × 10 1
/ 2
, 5 1
/ 2 × 8 1
/ 2, 8K,
16K
550 sheets52–103 g/m 2
 (14–28 lb. Bond)
Plain Paper–Middle ThickPaper sizes that can be
detected automatically:
A5
, 5 1
/ 2 × 8 1
/ 2
550 sheets52–169 g/m 2
 (14 lb. Bond–90 lb.
Index)
Plain Paper–Thick Paper 1Select the paper size using
the System Settings menu:
8 1
/ 4 × 14
, 8 × 10 1
/ 2,
182 × 210 mm
, 170 ×
210 mm
, 210 × 340 mm
, 11 × 15, 11 × 14,
10 × 15
550 sheets9. Adding Paper and Toner
136                                                
						

							Paper type and weightPaper sizePaper capacity52–169 g/m2
 (14 lb. Bond–90 lb.
Index)
Plain Paper–Thick Paper 1*1
Vertical: 139.7–297.0 mm
Horizontal: 139.7–432.0
mm
Vertical: 5.50–11.69 inches
Horizontal: 5.50–17.00
inches
550 sheetsTab Stock  *2
52–169 g/m 2
 (14 lb. Bond–90 lb.
Index)
Plain Paper–Thick Paper 1A4, 8 1
/ 2 × 11, 8 1
/ 2 ×
14550 sheets
*1 For details about how to load custom size paper, contact your service representative.
*2 The tab sheet holder is required.
Tray 3
Paper type and weightPaper sizePaper capacity52–216 g/m 2
 (14 lb. Bond–80 lb.
Cover)
Plain Paper–Thick Paper 2Paper sizes that can be
detected automatically:
A3
, A4, A5, B4 JIS
, B5 JIS, 11 × 17,
8 1
/ 2 × 14
, 8 1
/ 2 × 13,
8 1
/ 2 × 11
, 8 1
/ 4 × 13
, 8 × 13, 7 1
/ 4 × 10 1
/ 2
, 5 1
/ 2 × 8 1
/ 2, 8K,
16K
550 sheets52–216 g/m 2
 (14 lb. Bond–80 lb.
Cover)
Plain Paper–Thick Paper 2Select the paper size using
the System Settings menu:
8 1
/ 4 × 14
, 8 × 10 1
/ 2,
182 × 210 mm
, 210 ×
340 mm
, 11 × 15, 11
× 14
, 10 × 15
550 sheetsRecommended Paper Sizes and Types
137                                  
						

							Paper type and weightPaper sizePaper capacity52–216 g/m2
 (14 lb. Bond–80 lb.
Cover)
Plain Paper–Thick Paper 2*1
Vertical: 139.7–297.0 mm
Horizontal: 180.0–432.0
mm
Vertical: 5.50–11.69 inches
Horizontal: 7.09–17.00
inches
550 sheetsTab Stock  *2
52–216 g/m 2
 (14 lb. Bond–80 lb.
Cover)
Plain Paper–Thick Paper 2A4, 8 1
/ 2 × 11, 8 1
/ 2 ×
14550 sheets
*1 For details about how to load custom size paper, contact your service representative.
*2 The tab sheet holder is required.
Bypass tray 
(mainly Europe and Asia)
Paper type and weightPaper sizePaper capacity52–216 g/m 2
 (14 lb. Bond–80 lb.
Cover)
Plain Paper–Thick Paper 2Paper sizes that can be
detected automatically:
A3
, A4, A5,
100 × 148 mm
• Plain Paper–Middle Thick: 100 sheets
• Thick Paper 1: 30 sheets
• Thick Paper 2: 20 sheets9. Adding Paper and Toner
138