Samsung 750 Lcd Tv User Manual

							
English - 9

Share
Sharing a Folder
You can share a folder from your PC to the TV. The maximum number of folders that can be shared is 32.
Your PC will operate as a server to the TV.
Method 1: Select a folder in My Computer, select the Share menu and then select the Share Folder sub-menu.
Method 2: Select a folder in My Computer, right-click over the selected folder and then select Share Folder from the popup menu.
Method 3: Locate the mouse pointer over a folder in the My Computer folder list in the left pane and drag&drop the folder into the Shared Folders pane. If a message appears asking you to confirm the \
shared folder, select Yes.

Cancelling a Shared Folder
You can cancel a shared folder on your PC. Select a folder from the Shared Folder pane and select Unshare Folder.
Method 1: Select a folder from the Shared Folder pane, select the Share menu and then select Unshare Folder.
Method 2: Select a folder from the Shared Folder pane, right-click over the selected folder and then select Unshare Folder from the pop-up menu.
Method 3: Locate the mouse pointer over a folder in the Shared Folder pane and drag&drop the folder into the My Computer pane. If a message appears asking you to confirm the cancelation, select\
 Yes.

Applying the Current Settings
Perform this when synchronization is necessary due to a new shared folde\
r or cancelling a shared folder. The Set Changed State menu applies changes to shared folders to the data saved with the PC sha\
re Program.
Since applying changes to the internal data is a time-consuming process,\
 this function enables users to apply changes to the data only when required.
Until the Set Changed State menu is selected, the changed state of the shared folder is not applied\
 to the server.
Changes to the shared folders are not applied to your PC until you selec\
t the Set Changed State menu.
Method 1: Select the Share menu and select the Refresh DB sub-menu.
Method 2: Click the Set Changed State icon.

 
❑
■
N
●
●
●
■
●
●
●
■
●
●

[750-NA]BN68-02111B-Eng.indb   592009-03-30   �� 1:43:09 
						

							
English - 60

Setting the Access Permission
To enable the TV to find your PC, the TV must be set to Set Device Policy in the Access Permission Settings window. In addition, the PC server and the TV must be on the same subnet.
Method: Select the Share menu and select Set Device Policy. Rejected items are represented in gray. You can change the access permissions by using the Allow Accept / Deny button. To delete an item, select the item and select Delete Item.
Server
Server
You can run or stop using your PC as a server.
Run DLNA Digital Media Server when Windows Starts
You can determine whether to start the PC server automatically when Windo\
ws starts.
Change server name
You can rename the PC server. Enter a new name and click OK. The new name will appear at the top right of the window and will appear on the TV.
Help
Version
The program version information message box appears.
Using the DLNA Function
Using the DLNA Menu
DLNA (Digital Living Network Alliance) enables content saved on a DLNA server (usually your PC) connected to your TV or over a network to be played. Media Play enables playing content saved on a US\
B memory device connected to the TV, while DLNA enables playing content saved on a DLNA server (your PC) connected to your TV or over the network. The procedures to use the content are the same as those for Media Play (USB & DLNA).
If you install the PC share manager program supplied with the TV onto a PC, you can have the PC perform the role of a DLNA server over the network.
For detailed procedures on using the DLNA menu, refer to the ‘Media Play’ instructions. (see pages 39~55)
1. 
Press the MEDIA.P button on the remote control to display the DLNA menu.
2. 
Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then press the ENTERE button.
To exit DLNA mode, press the MEDIA.P button on the remote control.
DLNA does not support the following functions. 
The Background Music and Background Music Setting functions.
Sorting files by preference in the Photo, Music, and Movie folders.
The Change Group Info function.
The Copy / Delete function.
The Safe Remove function.
The REW/FF (π/μ) key functions while a movie is playing.
Playing Movie Continuously (Resume Play) function.
The Skip function may not work with some container such as asf and mkv.
The Divx DRM, Multi-audio, embedded caption does not supported.
Samsung PC Share manager should be permitted by the firewall program on \
your PC.
The Skip (◄/► keys) or Pause function may not work while a movie is playing fo r the DLNA of other manufacturers, depending on the corresponding content information.
The playing time may not be displayed while a movie is playing.
■
●
❑
■
■
■
❑
■
¦
N
N
N
N
•
•
•
•
•
•
•
N
N
N
N
N

[750-NA]BN68-02111B-Eng.indb   602009-03-30   �� 1:43:09 
						

							
English - 61

ANYNET+
Connecting Anynet+ Devices
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices\
 that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a TV
1. Connect the HDMI IN (1(DVI), 2,  or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
To connect to Home Theater
1. Connect the HDMI IN (1(DVI), 2,  or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theater.
When following the connection above, the Optical jack only outputs 2 cha\
nnel audio. You will only hear sound from the Home Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theater, not the TV.
Connect only one Home Theater.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
¦
N
N
N
N
N
N
Anynet+ Device 1
HDMI 1. CableHDMI 1. CableHDMI 1. CableHDMI 1. Cable
Anynet+ Device 2Anynet+ Device Anynet+ Device 4TV
Anynet+ Device 1
HDMI 1. Cable
HDMI 1. CableHDMI 1. Cable
TV
HDMI 1. Cable
Optical Cable
Anynet+ Device 2Anynet+ Device Anynet+ Device 4
Home Theater

[750-NA]BN68-02111B-Eng.indb   612009-03-30   �� 1:43:10 
						

							
English - 62

Setting Up Anynet+
Press the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools	→	Anynet+ (HDMI-CEC).
Setup
Anynet+ (HDMI-CEC)	→	Off	/	On
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto	Turn	Off	→	No	/	 Yes
Setting an Anynet+ Device to turn Off automatically when the TV is turned Off.
The active source on the TV remote must be set to TV to use the Anynet+ function.
If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.
Switching between Anynet+ Devices
1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2. 
Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Anynet+ devices connected to the TV are listed.
If you cannot find a device you want, press the red button to scan for d\
evices. 
. 
Press the ▲ or ▼ button to select a particular device and press the ENTERE button. It is switched to the selected device.
Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of con\
nected devices.
When the device scan is complete, the number of devices found are not di\
splayed.
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV may not always be automatically displayed in the device list. Press t\
he red button to search for the connected device.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ MenuDescription
View TVAnynet+ mode changes to TV broadcast mode.
Device ListShows the Anynet+ device list.
(device_name) MENUShows the connected device menus. E.g. If a DVD recorder is connected, t\
he disc menu of the DVD recorder will appear.
(device_name) INFOShows the play menu of the connected device. E.g. If a DVD recorder is c\
onnected, the play menu of the DVD recorder will appear.
Recording: (*recorder)Starts recording immediately using the recorder. (This is only available for devices that support the recording function.)
Stop Recording: (*recorder)Stops recording.
ReceiverSound is played through the receiver.
If more than one recording device is connected, they are displayed as (\
*recorder) and if only one recording device is 
connected, it will be represented as (*device_name).
¦
T
❑
■
N
■
N
N
¦
N
N
N
N
N
N
N
N
N
U	Move							E	Enter							R	Return
Anynet+ 	(HDMI-CEC)	 :	On	 																																	▶
Setup
Auto	Turn	Off	 :	Yes
Media	Play	(USB	&	DLNA)
Anynet+
	(HDMI-CEC)	
Content	Library
Internet@TV	
Home	Network	Center
Application
U	Move							E	Enter							R	Return
Anynet+
	(HDMI-CEC)	 :	On
Setup
Auto	Turn	Off	 :	Yes																															▶
U	Move							E	Enter							R	Return
View	TVDevice	List
Recording:	DVDR
DVDR	MENU
DVDR	INFO
Receiver:	Off
Setup

[750-NA]BN68-02111B-Eng.indb   622009-03-30   �� 1:43:10 
						

							
English - 6

TV Remote Control Buttons Available in Anynet+ Mode
Device TypeOperating StatusAvailable Buttons
Anynet+ Device
After switching to the device, when the menu of the corresponding device is displayed on the screen.
Numeric buttons▲/▼/◄/►/ ENTERE buttonsColor buttons / EXIT button
After switching to the device, while playing a fileπ(Backward search) / μ(Forward search) / ∫(Stop) / ∂(Play) / ∑(Pause)
Device with built-in TunerAfter switching to the device, when you are watching a TV programz button
Audio DeviceWhen Receiver is activatedy / MUTE button
The Anynet+ function only works when the active source on the TV remote control is set to TV.
The ∏ button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.
The TV remote control may not work under certain conditions. If this occurs,\
 reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.
The π, μ operations may differ depending on the device.
Recording
You can make a recording of a TV program using a Samsung recorder.1. 
Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2. 
Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE button. Recording begins.
When there is more than one recording device
When multiple recording devices are connected, the recording devices are\
 listed. Press the ▲ or ▼ button to select a recording device and press the ENTERE button. Recording begins.
When the recording device is not displayed select Device List and press the Red button to search devices
. 
Press the EXIT button to exit.
You can record the source streams by selecting Recording: (device_name).
Pressing the ∏ button will record whatever you are currently watching. If you are watc\
hing video from another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected t\
o the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.
Listening through a Receiver (Home Theater)
You can listen to sound through a receiver instead of the TV speaker. 1. 
Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2. 
Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
. 
Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in j\
ack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
When the receiver (home theater) is set to On, you can hear sound outp\
ut from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home Theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the Speaker Select may be set to External Speaker when you turn the TV on again.
N
N
N
N
N
N
¦
N
N
N
N
N
¦
N
N
N
N
U	Move							E	Enter							R	Return
View	TVDevice	List
Recording:	DVDR
DVDR	MENU
DVDR	INFO
Receiver:	Off
Setup
U	Move							E	Enter							R	Return
View	TVDevice	List
Recording:	DVDR
DVDR	MENU
DVDR	INFO
Receiver:	Off
Setup

[750-NA]BN68-02111B-Eng.indb   632009-03-30   �� 1:43:10 
						

							
English - 64

Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work.Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver (home theater).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work in certain situations. (Searching channels, Operating \
Media Play, Plug & Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to sear\
ch devices again or turn your TV off and on again.
Check if the Anynet+ Function of Anynet+ device is set on.
●
●
●
●
●
●
●
●
●
●
I want to start Anynet+.Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to show the Anynet+ menu and select a menu you want.
●
●
I want to exit Anynet+.Select View TV in the Anynet+ menu.
Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
Press z, CH LIST, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.)
●
●
●
The message ‘Connecting to Anynet+ device...’ appears on the screen.
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is complete.
●
●
The Anynet+ device does not play.You cannot use the play function when Plug & Play is in progress.●
The connected device is not displayed.Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not support Anynet+ functions.
If it is terminated by an abnormal situation such as disconnecting the H\
DMI cable or power cord or a power failure, please repeat the device scan.
●
●
●
●
●
●
The TV program cannot be recorded.Check whether the antenna jack on the recording device is properly conne\
cted.●
The TV sound is not output through the receiver.Connect the optical cable between TV and the receiver.●
¦

[750-NA]BN68-02111B-Eng.indb   642009-03-30   �� 1:43:10 
						

							
English - 6

CONTENT LIBRARY
Using the Content Library
The Content Library allows you to enjoy various content on your TV. You can use the default content stored in the TV memory or you can enjoy new content using a USB device or via the Internet.
Using the Content Library Menu
1. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button.
2. Press the ▲ or ▼ button to select Content Library, then press the ENTERE button.
The Content Library main menu is displayed.
. Press the ◄ or ► button to select an icon (Gallery, Cooking, Game, Children, Wellness, Others, Content Management), then press the ENTERE button.
Using the Remote Control Button in Content Library Menu
ButtonOperations
▲/▼/◄/►Move the cursor and select an item.
ENTERESelect the currently selected item.
RETURNReturn to the previous menu.
EXITStop the current function and return to the Content Library main menu.
zStop Content Library mode and Returns to TV mode.
Color buttonKeys that provide functions are described on the corresponding page.
y / MUTEYou can control the volume of the played content.
CONTENT LIBRARY CONTAINS TEXT, GRAPHICS, IMAGES, MULTIMEDIA, AND OTHER MATERIALS FOR INFORMATIONAL AND PROMOTIONAL PURPOSES ONLY. MATERIALS IN CONTENT LIBRARY HAS BEEN MODIFIED AND KEEPS BEING REVISED AND UPDATED. THE MATERIALS IN THE CONTENT LIBRARY MAY NOT BE SUITABLE FOR ALL AUDIENCES.INFORMATION IN THE CONTENT LIBRARY IS PROVIDED ‘AS IS.’ ALTHOUGH THE INFORMATION PROVIDED TO YOU IN THE CONTENT LIBRARY IS OBTAINED OR COMPLIED FROM SOURCES WE BELIEVE TO BE RELIABLE, SAMSUNG CANNOT AND DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS OR COMPLETENESSOF ANY INFORMATION OR DATA MADE AVAILABLE TO YOU FOR ANY PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE HELD LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES WHATSOEVER ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR THE USE OF, THE CONTENT LIBRARY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
¦
N
Media	Play	(USB	&	DLNA)Anynet+	(HDMI-CEC)	
Content	Library
Internet@TV	Home	Network	Center
Application
R	Return									e	Exit
Gallery
GalleryCookingGameChildrenWellness

[750-NA]BN68-02111B-Eng.indb   652009-03-30   �� 1:43:11 
						

							
English - 66

Using the TV Memory Contents
You can use enjoy content stored in the TV memory. You can add/delete content to/from the TV memory. To add/delete content, select Content Management.
To return to Content Library main menu, press the EXIT button.
Gallery
This function plays a SlideShow with high resolution images and backgrou\
nd music and produces various atmospheres. Using the Gallery function of the TV, you can change your home atmosphere.
The copyrights of the Gallery contents and all issues related to them are reserved by TimeSpace, Inc. 
Press the ENTERE button to pause the SlideShow, and also press the ENTERE button to resume the SlideShow.
Press the INFO button to display information on the selected photo. (This is not disp\
layed if the photo has no information.)
Cooking
You can view various recipes and then easily follow them step by step. En\
joy these contents which will give you great ideas for meals.
The recipes introduced in the Cooking contents on the Samsung TV are based on recipes published by Anness Publishing.
The copyrights of the Cooking contents and all issues related to them are reserved by Practical Pictu\
res.
Game
This category provides entertainment games for the whole family.
For the buttons used in the games, refer to the directions on the screen\
.
Color Buttons for Games
ButtonOperations
RedPress to move to the game home screen
GreenPress to pause the game
YellowOption Key
BluePress to exit the game
Children
This is educational and interactive content that children can watch repe\
atedly. 
The copyrights of the Children contents and issues related to them reserved by UpToTen.
Wellness
This is beneficial health management content that provides stretching an\
d massage exercises that can be enjoyed by the whole family.
Others 
The default content is not saved in the TV memory.
You can copy new content to the TV memory using the Content Management screen.
¦
N
❑
N
N
N
❑
N
N
❑
N
N
❑
N
❑
❑
N
R	Return									e	Exit
Gallery
GalleryCookingGameChildrenWellness

[750-NA]BN68-02111B-Eng.indb   662009-03-30   �� 1:43:11 
						

							
English - 67

Using the Content Management
Content Management
You can add or delete contents using the Content Management.
You can select multiple content items by selecting content items repeated\
ly and pressing the Yellow button.
My Contents
You can check the content saved in the TV memory for each subitem of the Content Library.
Select a content item and press the ENTERE button. You can play or delete the selected content item.
Internet Download
If your TV connect to the internet via a LAN cable, you can directly download th\
e contents provided by Samsung Electronics.
Select a content item and press the ENTERE button. You can play the selected content item or copy it to the TV memory.
USB
You can check the content saved on the USB device for each subitem of the\
 Content Library.
Select a content item and press the ENTERE button. You can play the selected content item or copy it to the TV memory.
Content Library only supports USB Mass Storage Class devices (MSC). MSC is a Mass Sto\
rage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers.
Playing a game using an external USB memory device will allow you to sav\
e your game (depending on the game). Take care as removing the USB memory device while saving data to the USB memo\
ry device may cause the data to be lost.
Downloading New Contents
New content other than the built-in content will be provided via the Sam\
sung. com website free of charge. When you download the paid contents, you need UDN number to download contents. Ch\
eck the UDN number before downloading a new content item.
Downloading Content
1. Visit the www.samsung.com website.
2. Select a content item in the Contents Download page.
. Download the contents onto the USB memory device.
4. Go to Content Library main menu by pressing CONTENT button or choosing Content Library (Menu → Application	→	Content	Library).
. Plug the USB memory into USB port on the side of the TV. 
6. You can see the content sub item which you downloaded.
7. Select a content item and press the ENTERE button.
8. You can play the selected content item or copy it to the TV memory.
●
Setup
Screen Saver Run Time: Select to set the waiting time before the screen saver appears.
Save UDN: Saves the UDN number to a USB device.
An NTFS format USB storage device does not support saving UDN. We recommend using a FAT format USB storage device.
¦
❑
N
■
●
■
●
■
●
N
N
N
■
●
●
N
Content	Management
R	Return									e	ExitGameChildrenWellnessOthersContent	Management
R	Return									e	Exit
1/1
œ	›
My	ContentsInternet	Download	USBSetup
TV	Memory						17.16GB/189.00MB	Available
GalleryCookingGameChildrenWellnessOthers
Content	Management	>	My	Contents

[750-NA]BN68-02111B-Eng.indb   672009-03-30   �� 1:43:11 
						

							
English - 68

INTERNET@TV
You can enjoy the best of the Internet in perfect harmony with the simpli\
city and reliability of your television.
If you have some problems while using a widget service, please contact t\
he content provider. In the widget, press the green button to get contact information or refer to help website for the widget provi\
der information.
In some regions, only English may be supported for services.
Getting Started with Internet@TV
Internet@TV provides an integrated Internet and television experience powered by th\
e Yahoo!® Widget Engine. You can monitor financial stocks, share photos with friends and family, and track news and weather all through the Internet@TV service on your television.
You may experience slow operation or hesitation when using this function \
due to network conditions.
When running Internet@TV for the first time, the basic settings proceed automatically.
The first step is to set up your network. For more information on how to\
 configure your network, refer to ‘Setting the Network’. (see pages 30~35)
After your network is operational, the Internet@TV software guides you t\
hrough a step-by-step setup wizard.
What is a Widget?
A TV Widget is a small web application that allows you to easily access yo\
ur favorite site using the remote control. You can enjoy various types of information, such as the latest news, weather informati\
on, and stock information, etc. on your TV along with your friends or family members.
Some widgets may not be supported depending on the regulations of the co\
rresponding country. 
Some widgets will only support limited services depending on the regulat\
ions of the corresponding country.
The color buttons may work differently depending on the widget.
The operation may not be smooth depending on the network condition.
The Snippet is a symbol of Widget.
What is a Snippet?
A snippet shows a part of the Widget contents such as weather and stock i\
nformation that the user wants to view.
The snippets are automatically updated in real time.
It may take a few seconds to load the snippet.
1. 
Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button.
2. 
Press the ▲ or ▼ button to select Internet@TV, then press the ENTERE button.
Internet@TV starts.
Press the INTERNET@ button on the remote control to display the Internet@TV menu.
. 
The General Disclaimer is displayed on the screen. Select I accept or I do not accept.
For more information on the General Disclaimer, refer to the ‘Legal Notice’. (see page 36)
4. 
The ‘welcome screen’ is the starting point of the Internet@TV guided setup.
If you select Exit Setup, this step is resumed when you press the INTERNET@ button.
Select Let’s get started!
. Choosing your location allows TV Widgets to use localized content.
Select your country from the list provided.
N
¦
N
N
N
❑
N
N
N
N
N
❑
N
N
N
O
N
N
N
N
Welcome	to	Yahoo!®	TV	Widgets!
Yahoo!	TV	Widgets	bring	the	best	of	the	internet	to	
your	TV!	You	can	get	updated	weather	conditions	or	
sports	scores,	get	updated	information	on	stocks,	or	
even	view	full-screen	photos	and	video!
We	just	need	to	get	a	few	things	set	up,	and	you’ll	be	
on	your	way!
Let’s	get	started! Exit	setup
1

[750-NA]BN68-02111B-Eng.indb   682009-03-30   �� 1:43:11