Samsung Le 26r51b Owners Instructions

							English-39
Listening to the Sound of the Sub Picture
During the PIP feature is activating, you can listen to the sound of the
sub picture.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Sound.
Result
: The options available in the Soundgroup are displayed.
3Press the ENTERbutton.
4Press the or  button to select Sound Selectand then press
the ENTERbutton.
Result
:MainandSubare displayed.
Y ou can select this option when the PIP is in “
On”.
5Select the Subby pressing the or  button.
Press the ENTERbutton.
Result
:Y ou can listen to the sound of the sub picture.
To  listen the sound of the current main picture, set to 
Main.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 39
 
						

							English-40
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is displayed when
you press the INFO button. You must also set the time if you wish to
use the automatic On/Off timers.
If you disconnect the power cord, you have to set the clock
again.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Setup.
Press the ENTERbutton.
Result
: The options available in the Setupgroup are displayed.
3Press the or  button to select Time.
Press the ENTERbutton.
Result: The Timemenu is displayed with Clock Setselected.
4Press the ENTERbutton. 
5To... Press the...
Move to Houror Minuteor button
Set the Houror Minuteor button
Press the ENTERbutton. 
6When you are satisfied with the setting, press the MENUbutton
to return to the previous menu or press the EXITbutton to return to
normal viewing.
7To  display the... Press the...
Current time and selected audio/videoINFObutton
setting status
Y ou can also set hour and minute by pressing the number buttons 
on the remote control.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 40
 
						

							English-41
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after which
the television automatically switches to standby mode.
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the or  button to select Setup.
Press the ENTERbutton.
Result
: The options available in the Setupgroup are displayed.
3Press the or  button to select Time.
Press the 
ENTERbutton.
Result: The Timemenu is displayed with Clock Setselected.
4Press the or  button to select Sleep Timer.Press the ENTERbutton.
5Press the or  button repeatedly and cycle through the preset
time intervals (Off, 30, 60,  90, 120, 150, 180).
Press the
ENTERbutton. 
Result
:The TV automatically switches to standby mode when the
timer reaches 0. 
6To  cancel the sleep timer function, select Offby pressing the
or  button and then press the ENTERbutton.
7Press the EXITbutton to return to normal viewing.
Y ou can set the sleep timer by simply pressing the SLEEPbutton on the
remote control.
1Press the SLEEPbutton on the remote control.
Result:If the sleep timer is not yet set, Offis displayed.
Otherwise, the remaining time before which the television
switches to standby mode is displayed.
2Select the preset time interval for staying on by pressing the SLEEP
button repeatedly.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 41
 
						

							You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your
choice at the time you select.
Switch off automatically at the time you select.
The first step is to set the television’s clock
(refer to “Setting and Displaying the Current Time” on page 40 ).
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Setup.
Press the ENTERbutton.
Result
: The options available in the Setupgroup are displayed.
3Press the or  button to select Time.
Press the ENTERbutton.
Result: The Timemenu is displayed with Clock Setselected.
4Press the or  button to select On Timer.Press the ENTERbutton. 
Result
:The On Timermenu is displayed.
5Set the time, channel and volume level at which you wish the set to
be switched on.
T o... Press the...
Move to Hour, Minute,Programme, and V olumeor button
Set Hour, Minute,Programme, and Volumeor button
Move to Activationor button
Select Ye sto enable above setting or  button
Press the ENTERbutton. 
6Press the or  button to select Off Timer.
In the same way, set the time at which you wish the set to
be switched off automatically.
You can also set hour and minute by pressing the number 
buttons on the remote control.
English-42
Switching the Television On and Off Automatically
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 42
 
						

							English-43
Activating the Child Lock
This feature allows you to prevent unauthorized users, such as children,\
from watching unsuitable programmes by muting out video and audio.
Child Lock cannot be released using the buttons on the lower-right
panel. Only the remote control can release the Child Lock setting, so
keep the remote control away from children.This function does not work in PC mode.
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the or  button to select Setup.
Press the ENTERbutton.
Result
: The options available in the Setupgroup are displayed.
3Press the or  button to select Child Lock.Press the ENTERbutton.
Result
: The options available in the Child Lockgroup are
displayed.
4Press the ENTERbutton again.
Result
: The Child Lockis selected.
5Press the or  button to select On.
Press the ENTERbutton.
6Press the or  button to select Programme.
Press the ENTERbutton.
7Press the  or  button to select the channels to lock.
Press the ENTERbutton.
8Press the or  button to select Lock.
Press the ENTERbutton.
9Press the  or  button to select Lockedto lock the channels.
Press the ENTERbutton. 
10Repeat steps 6and 9for each channel to be locked or unlocked.
11Press the EXITbutton to return to normal viewing.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 43
 
						

							If no signal is being received or the signal is very weak, a blue screen\
automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
Blue Screen mode to Off.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Setup.
Press the ENTERbutton.
Result
: The options available in the Setupgroup are displayed.
3Press the or  button to select Blue Screen.Press the ENTERbutton.
4Press the or  button to select On.
Press the ENTERbutton.
5Press the EXITbutton to return to normal viewing.
English-44
Setting the Blue Screen Mode
Y ou can hear melody sound when the television is powered on or off.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Setup.
Press the 
ENTERbutton.
Result
: The options available in the Setupgroup are displayed.
3Press the or  button to select Melody.Press the ENTERbutton.
4Press the or  button to select On.
Press the ENTERbutton.
5Press the EXITbutton to return to normal viewing.
Selecting the Melody 
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 44
 
						

							English-45
Selecting a Device from External Sources
Your set enables you to choose which audio/video signals are output to
the external connector.
1Press the MENUbutton.
Press theENTERbutton to select Input.
Result: The options available in the Inputgroup are displayed.
2Press theENTERbutton. 
Result
: The options available in the Source Listmenu are
displayed.
When no external device is connected to your set,
only 
TV, Ext.1, Ext.2are activated in theSource List. AV, S-Video, Component, PC,HDMI are activated only when they are connected
to your set.
3Select the required device by pressing the  or  button. 
Press theENTERbutton.
4Repeat step 1.
Press the  or  button to select Edit Name.
Press theENTERbutton. 
Result
: The options available in the Edit Namemenu are
displayed.
5Select the device that you wish to edit by pressing the  or 
button.
Result
: The following options are available:Ext.1 - Ext.2 - AV - S-Video - Component - PC - HDMI
6Press theENTERbutton. 
7Select the required device by pressing the  or  button
repeatedly.
Press the
ENTERbutton. 
Result
: The following options are available:---- - VCR - DVD - D-VHS - Cable STB - HD STB -
Satellite STB - AV Receiver - DVD Receiver - Game -
Camcorder - DVD Combo - DHR - PC
8When you are satisfied with the setting, press the MENUbutton
to return to the previous menu or press the EXITbutton to return to
normal viewing. 
DHR: DVD HDD Recorder
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 45
 
						

							English-46
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1Check that all the necessary connections have been made.
2Press the SOURCEbutton.
Result
: The edited device and audio status are displayed on top-
left of the set.
3Press theSOURCEbutton until the required input source is selected.
If you change the external source while viewing, pictures
might take a short period of time to be switched. 
TVmode can be selected by pressing the TVor  / button on the
remote control but you cannot select it by pressing the 
SOURCE
button.
V iewing Pictures from External Sources
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 46
 
						

							English-47
Setting up Your PC Software(Based on Windows XP)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Sam\
sung Dealer.)
1First, click on “Control Panel” on the Windows start menu.
3When the control panel window appears, click on
“
Display” and a display dialog-box will appear.
2When the control panel window appears, click on
“
Appearance and Themes” and a display
dialog-box will appear.
4Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
- 1360 x 768 @ 60 Hz
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “
60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
*See “Display Modes” on page 63.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 47
 
						

							Auto adjustment allows the PC screen of set to self-adjust to the
incoming PC video signal.
The values of fine, coarse and position are adjusted automatically.
Press the PCbutton on the remote control to select the PC mode.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Setup.
Press the ENTERbutton.
Result
: The options available in the Setupgroup are displayed.
3Press the or  button to select PC.
Press the ENTERbutton.
Result
: The options available in thePCmenu are displayed.
4Press the or  button to select Auto Adjustment.
Press the ENTERbutton.
Result
: The screen quality and position are automatically
adjusted.
Adjusting the PC Screen Automatically
English-48
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 48