Samsung Le 26r51b Owners Instructions

							English-19
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you
watch most often.
1Press the MENUbutton.
Result
:The main menu is displayed.
2Press the or  button to select Channel.
Press the ENTERbutton.
Result:The options available in the Channelgroup are
displayed.
3Press the or  button to select Sort.Press the ENTERbutton.
Result
: The Prog., Ch.and Nameare displayed.
4Select the channelnumber that you wish to change by pressing the
or button repeatedly.
Press the 
ENTERbutton.
Result: The selected channelnumber and nameare moved to
right side.
5Press the or  button to move to the position in which you would
like to change and then press the ENTERbutton.
Result
: The selected channel is exchanged with the one
previously stored to the chosen number.
6Repeat steps 4to 5for another channel to be sorted.
BN68-00801C-02Eng.qxd  2/25/05 9:53 AM  Page 19
 
						

							English-20
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Channel.
Press the ENTERbutton.
Result: The options available in the Channelgroup are
displayed.
3Press the or  button to select Name.Press the ENTERbutton.
Result
: The currentProg., Ch.and Nameare displayed.
4If necessary, select the channel to be assigned to a new name by
pressing the or  button.
Press the 
ENTERbutton.
Result
: The selection bar is displayed around the name box.
5To... Then...
Select a letter, number or symbol Press the or  button
Move on the next letter Press the  button
Move back the previous letter Press the  button
Confirm the name Press the ENTERbutton
The characters available are :
Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters ( 
_, space)
6Repeat steps 4to 5for each channel to be assigned to a new name.
7When you are satisfied with the setting, press the MENUbutton
to return to the previous menu or press the EXITbutton to return to
normal viewing.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 20
 
						

							Fine Tuning Channel Reception
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however, the signal is weak or distorted, you may have to fine-tune
the channel manually.
Select the channel that you want to fine tune.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Channel.
Press the ENTERbutton.
Result: The options available in the Channelgroup are
displayed.
3Press the or  button to select Fine Tune.
Press the ENTERbutton.
Result: The horizontal bar is displayed.
4Press the  or  button to reach the required setting.
Press the 
ENTERbutton.
Result:An asterisk  “*” appears on the right-hand side of the
channel number. The channel number becames red.
To  reset the fine-tuning, select 
Resetby pressingthe or 
button and then press the ENTERbutton.
5When you are satisfied with the setting, press the MENUbutton
to return to the previous menu or press the EXITbutton to return to
normal viewing.
Fine tuned channels that have been saved are marked with an
asterisk “*” on the right-hand side of the channel number in the
channel banner. And the channel number becames red.
English-21
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 21
 
						

							English-22
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Picture.
Result
: The options available in the Picturegroup are
displayed.
3Press the ENTERbutton.
4Press the ENTERbutton again.
Result
: The options available in the Modegroup are displayed.
5Press the ENTERbutton.
Result
: The Modeis selected.
6Select the required picture effect by pressing the or  button
repeatedly. 
Result
: The following picture effects are available: Dynamic - Standard - Movie - Custom
7When you are satisfied with the setting, press the MENUbutton
to return to the previous menu or press the EXITbutton to return to
normal viewing.
Y ou can also display by simply pressing the P.MODE(Picture Mode) button.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 22
 
						

							English-23
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Picture.
Result
: The options available in the Picturegroup are
displayed.
3Press the ENTERbutton.
4Press the ENTERbutton again.
Result
: The options available in the Modegroup are displayed.
5Select the option (Contrast, Brightness, Sharpness, Colour,Tint) to be adjusted by pressing the or  button. 
Press the ENTERbutton.
Result
: The horizontal bar is displayed.
6Press the  or  button to reach the required setting.
Press the ENTERbutton.
7When you are satisfied with the setting, press the MENUbutton
to return to the previous menu or press the EXITbutton to return to
normal viewing.
Each adjusted setting will be stored separately according to its
input mode.
The Tint is inactivated as following cases.  •  Analog mode (RF, Scart, Video, S-Video)  In case of an input signal setting to PAL-50, PAL-CN,
and SECAM.
•  Component, DVI, and HDMI mode In case of an input signal setting to 60HZ; 480i, 480p,
720p @60Hz, 1080i @60Hz.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 23
 
						

							English-24
Changing the Colour Tone
Resetting the Picture Settings to the Factor y Defaults
You can select the most comfortable colour tone to your eye.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Picture.
Result
: The options available in the Picturegroup are
displayed.
3Press the ENTERbutton.
4Press the ENTERbutton again.
Result
: The options available in the Modegroup are displayed.
5Press the or  button to select Colour Toneand press theENTERbutton. Select the required option by pressing the 
or  button repeatedly. Press the ENTERbutton.
Result
: The following options are available:Cool2 - Cool1 - Normal - Warm1 - Warm2
6When you are satisfied with your choice, press the EXITbutton to
return to normal viewing.
Y ou can return to the factory defaults  picture settings.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Picture.
Result
: The options available in the Picturegroup are
displayed.
3Press the ENTERbutton.
4Press the ENTERbutton again.
Result
: The options available in the Modegroup are displayed.
5Press the  or  buttons to select Reset, then press theENTERbutton.
6Press the EXITbutton to return to normal viewing.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 24
 
						

							English-25
Changing the Picture Size
You can select the picture size which best corresponds to your viewing
requirements.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Picture.
Result
: The options available in the Picturegroup are
displayed.
3Press the ENTERbutton.
4Pressthe or  button to select Sizeand press the ENTERbutton.
5Select the required option by pressing the or  button
repeatedly.
Press the 
ENTERbutton.
Result
: The following options are available:Auto Wide-Wide-Panorama-Zoom-4:3
Zoom : 
Magnifies the 16:9 wide picture (in the
vertical direction) to fit the screen size.
Select  by pressing the 
or 
button. Use the or button to
move the picture up and down. After
selecting  , use the 
or button to
magnify or reduce the picture size in
the vertical direction.
Y ou can select these options by simply pressing the P.SIZE(Picture Size) button on the remote control.
In PC Mode, only Wide and 4:3 mode can be adjusted.
If you press 
P .SIZE(Picture Size) button when PIP is set
to on, PIP function will be cancelled and the picture size
will be changed.
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
Fr eezing the Current Picture
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 25
 
						

							English-26
Using the Digital NR (Digital Noise Reduction) Feature
If the signal received by your television is weak, you can activate
this feature to help reduce any static and ghosting that may appear
on the screen.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Picture.
Result
: The options available in the Picturegroup are
displayed.
3Press the ENTERbutton.
4Press the or  button to select Digital NR.Press the ENTERbutton.
5Press the or  button to select On.Press the ENTERbutton.
6Press the EXITbutton to return to normal viewing.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 26
 
						

							English-27
DNIe (Digital Natural Image engine)
Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm
gives viewers brighter and clearer images.
DNIe technology will match every signal to your eyes.
You can see how DNIe improves the picture by setting DNIe Demo mode
to On.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Picture.
Result
: The options available in the Picturegroup are
displayed.
3Press the ENTERbutton.
4Press the or  button to select DNIe Demoand then press theENTERbutton.
Press the or  button to select On.
Press the ENTERbutton.
DNIe Demo: OffDNIe Demo mode is deactivated.
DNIe Demo: OnThe right-hand side of the screen shows improved DNle
image. The left-hand side of the screen shows the
original image.
Y ou can also select these options by simply pressing theDNIebutton.
5When you are satisfied with your choice, press the EXITbutton to
return to normal viewing.
This function doesn’t work when source is in PC mode.
The 
DNle Demois designed to show the difference between
the regular and DNIe pictures.
By default, the product displays the picture with DNle applied.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 27
 
						

							My Colour Control is to adust the most preferred colours such as Blue,
Green, Pink without interfering with other colours in order for each
consumer to enjoy screen colour of its choice.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Picture.
Result
: The options available in the Picturegroup are
displayed.
3Press the ENTERbutton.
4Press the or  buttonto select My Colour Controland thenpress the ENTERbutton.
Result
: The options available in the My Colour Controlmenu
are displayed.
5Press the or  button to select Easy Controland press theENTERbutton. Select a source of the sub picture by pressing
the or button and press the ENTERbutton.
Result
: The sources are displayed in the following order: Blue - Green  -  Pink - Standard - Custom 
6Press the or  button to select Detail Controland press theENTERbutton.  Select a source of the sub picture by pressing
the or button and press the ENTERbutton.
Result
: The sources are displayed in the following order: Pink - Green - Blue- Reset
7Press the  or  button to reach the required setting.
Press the ENTERbutton.
8When you are satisfied with the setting, press the MENUbutton
to return to the previous menu or press the EXITbutton to return to
normal viewing.
This function captures the current screen in a still image to adjust
the colour.
This function doesnt work when source is in PC mode.
To  return to the factory default settings for My Colour Control
colours, select 
Resetby pressing the  or  button and then
press the ENTERbutton.
English-28
My Colour Control
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 28