Samsung Le 26r51b Owners Instructions

							English-59
Installing the Wall Mount Kit (LE32R51B, LE32R52B, LE40R51B)
2  Turn the power off and unplug the power cord from the outlet.Place the TV faced down on a soft cloth or cushion on a table.
Remove the four screws from the  back of the TV.
Separate the stand from the TV.
Cover the bottom hole with a cap
Attach the set-bracket onto the rear side of the TV set and secure the screws .
3  Insert three Hangers of the set-bracket into the grooves of the wall-bracket . Fix set-bracket and wall-bracket with screws .
Note: Before installing the set on the wall, connect the cables to the s\
et first.
How to assemble the Wall Mount Bracket
BN68-00801C-02Eng.qxd  2/25/05 9:55 AM  Page 59
 
						

							English-60
Installing the Stand (LE26R51B, LE32R51B, LE32R52B)
1.  Lower the TV set in the direction  of the arrow and fix the stand.
2.  Use the four screws to tightly fix the stand.
< 1 >< 2 >
BN68-00801C-02Eng.qxd  2/25/05 9:55 AM  Page 60
 
						

							English-61
Using the Anti-Theft Kensington Lock
1.  Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction
(Figure 2).
2.  Connect the Kensington lock cable.
3.  Fix the Kensington lock to a desk or a heavy stationary object.
The Kensington lock is a device used to physically fix the system when u\
sing it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ from 
the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for
proper use.
Cable
Figure 1
Figure 2

< LE32R51B / LE32R52B > < LE26R51B / LE40R51B >
BN68-00801C-02Eng.qxd  2/25/05 9:55 AM  Page 61
 
						

							English-62
Technical and Environmental Specifications
Model Name LE26R51B LE32R51B/LE32R52B LE40R51B
PanelSize 26” Diagonal (16:9) 32” Diagonal (16:9) 40” Diagonal (16:9)
Display Size 575.77(H) x323.71(V) mm  697.68 (H) x392.26 (V) mm 885.17 (H) x 497.66 (V) mm
(22.67(H) x 12.74(V) inches) (27.47 (H) x 15.44 (V) inches) (34.85 (H) x 19.59 (V) inches)
T ype a-si TFT active matrix a-si TFT active matrix a-si TFT active matrix
Pixel Pitch 0.4215(H) x 0.4215(V) mm 0.511 (H) x 0.511 (V) mm 0.648 (H) x 0.216 (V) mm (0.0166(H) x 0.0166(V) inches) (0.0201 (H) x 0.0201(V) inches) (0.027 (H) x 0.0085 (V) inches)
V iewing Angle 170/170 (H/V) 170/170 (H/V) 170/170 (H/V)
Resolution 1366 (H) x 768 (v) 1366 (H) x 768 (V) 1366 (H) x 768 (V)
FrequencyHorizontal 30 ~ 61 kHz 30 ~ 61 kHz 30 ~ 61 kHz
Ve r t ical 60 ~ 75 Hz 60 ~ 75 Hz 60 ~ 75 Hz
Display Colour 16,777,216 colours 16,777,216 colours 16,777,216 colours
PC ResolutionMaximum 1360 x 768 @ 60 Hz 1360 x 768 @ 60Hz 1360 x 768 @ 60Hz
Optimum 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz
Input SignalSync. H/V Separate, TTL, P. or N. H/V Separate, TTL, P. or N. H/V Separate, TTL, P. or N.
V ideo Signal 0.7 Vp-p @ 75 ohm 0.7 Vp-p @ 75 ohm 0.7 Vp-p @ 75 ohm
TVColour System PAL, SECAM-B/G, D/K,  PAL, SECAM-B/G, D/K, PAL, SECAM-B/G, D/K,
I, I/I, L/L’, NTPB (AV3.58, 4.43) I, I/I, L/L’, NTPB (AV3.58, 4.43) I, I/I, L/L’, NTPB (AV3.58, 4.43)
Sound System BG, DK, I, L BG, DK, I, L BG, DK, I, L
V ideoColour System PAL/NTSC/SECAM PAL/NTSC/SECAM PAL/NTSC/SECAM
Video System CVBS, S-VHS, RGB CVBS, S-VHS, RGB CVBS, S-VHS, RGB
SCART 1Video Input/Output 1.0 Vp-p @ 75 ohm 1.0 Vp-p @ 75 ohm 1.0 Vp-p @ 75 ohm
RGB Input 0.7 Vp-p @ 75 ohm 0.7 Vp-p @ 75 ohm 0.7 Vp-p @ 75 ohm
Audio Input/Output 500mVrms 500mVrms 500mVrms
SCART 2V ideo Input/Output 1.0 Vp-p @ 75 ohm 1.0 Vp-p @ 75 ohm 1.0 Vp-p @ 75 ohm
Audio Input/Output 500mVrms 500mVrms 500mVrms
Power SupplyInput AC 220 ~ 240 V, 60/50 Hz ±3Hz AC 220 ~ 240 V,  60/50 Hz ±3Hz  AC 220 ~ 240 V,  60/50 Hz ±3Hz 
Power ConsumptionMaximum 140 W 184 W 285 W
Power Saving 
						

							English-63
Technical and Environmental Specifications
Display Mode (PC)
Model LE26R51B LE32R51B/LE32R52B LE40R51B
W eightWith stand 11.3 kg (24.91 lbs) 17.7 kg (39.02 lbs) 27.2 kg (59.96 lbs)
Environmental Considerations
Operating Temperature 10°C to 40°C (50°F to 104°F) 10°C to 40°C (50°F to 104°F) 10°C to 40°C (50°F to 104°F)
Operating Humidity 10% to 80%, non-condensing 10% to 80%, non-condensing 10% to 80%, non-condensing
Storage Temperature -20°C to 45°C (-4°F to 113°F) -20°C to 45°C (-4°F to 113°F) -20°C to 45°C (-4°F to 113°F)
Storage Humidity 5% to 95%, non-condensing 5% to 95%, non-condensing 5% to 95%, non-condensing
Audio Characteristics
Audio Input RCA Jack(L, R), 0.5 Vrms(-9dB) RCA Jack (L, R), 0.5Vrms (-9dB) RCA Jack (L, R), 0.5Vrms (-9dB)
Audio Input (PC) 3.5Ø Stereo Jack, 0.5Vrms (-9dB) 3.5Ø Stereo Jack, 0.5Vrms (-9dB) 3.5Ø Stereo Jack, 0.5Vrms (-9dB)
Headphone Output Max. 10mW Output Max. 10mW Output  Max. 10mW Output 
(3.5Ø Stereo Jack, 32Ω) (3.5Ø Stereo Jack, 32 Ω) (3.5Ø Stereo Jack, 32 Ω)
Frequency RF: 80Hz ~ 15kHz (at -3dB) RF: 80Hz ~ 15kHz (at -3dB) RF: 80Hz ~ 15kHz (at -3dB)
Response A/V: 80Hz ~ 20kHz (at -3dB) A/V: 80Hz ~ 20kHz (at -3dB) A/V: 80Hz ~ 20kHz (at -3dB)
Sound
Output 5 W X 2 10 W X 2 10 W X 2
3D Surround SRS TrusurroundXT SRS TrusurroundXT SRS TrusurroundXT
Stereo Nicam/A7 Nicam/A3 Nicam/A2
Both screen position and size will vary depending on the type of PC moni\
tor and its resolution.
The table below shows all of the display modes that are supported:
Mode Resolution Horizontal Vertical Pixel Clock Sync Polarity Frequency (kHz) Frequency (Hz) Frequency (MHz) (H/V)
IBM640 x 480 31.469 59.940 25.175 - / -
720 x 400 31.469 70.087 28.322 - / +
VESA640 x 480 37.861 72.809 31.500 - / -
640 x 480 37.500 75.000 31.500 - / -
800 x 600 37.879 60.317 40.000 + /+
800 x 600 48.077 72.188 50.000 + /+
800 x 600 46.875 75.000 49.500 + /+
1024 x 768 48.364 60.000 65.000 - / -
1024 x 768 56.476 70.069 75.000 - / -
1024 x 768 60.023 75.029 78.750 + /+
1360 x 768 47.712 60.015 85.800 + /+
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selec\
ted.
DVI dose not support PC function.
BN68-00801C-02Eng.qxd  2/25/05 9:55 AM  Page 63
 
						

							English-64
Pin Configurations
SCART Connector
Pin Signal
1Audio output R
2 Audio input R
3 Audio output L
4 Audio chassis return
5V ideo chassis return (RGB blue)
6 Audio input L
7 RGB blue input
8 Switching voltage
9V ideo chassis return (RGB green)
10 AV-Link (Ext 1) 11 RGB green input
Pin Signal
12 -
13 Video chassis return (RGB red)
14 -
15 RGB red input
16 Blanking signal (RGB switching)
17 Video chassis return
18 Blanking signal ground
19 Video output
20 Video input
21 Screening/chassis return
PC Input Connector (15Pin)
Pin Signal
1Red (R)
2 Green (G)
3 Blue (B)
4 Grounding
5 Grounding (DDC)
6 Red (R) Grounding
7 Green (G) Grounding
8 Blue (B) Grounding
Pin Signal
9Reserved
10 Sync Grounding 11 Grounding
12 Data (DDC)
13 Horizontal sync.
14 Vertical sync.
15 Clock (DDC)
BN68-00801C-02Eng.qxd  2/25/05 9:55 AM  Page 64
 
						

							English-65
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICEThe mains lead on this equipment is supplied with a moulded plug incorpo\
rating a fuse. The value of the fuse
is indicated on the pin face of the plug and, if it requires replacing, \
a fuse approved to BSI1362 of the same
rating must be used. Never use the plug with the fuse cover omitted if t\
he cover is detachable.
If a replacement fuse cover is required, it must be of the same colour a\
s the pin face of the plug. Replacement
covers are available from your dealer. If the fitted plug is not suitable for the power points in your house \
or the
cable is not long enough to reach a power point, you should obtain a sui\
table safety approved extension lead
or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse
and then safely dispose of the plug. DO NOT connect the plug to a mains socket as there is a risk of shock
hazard from the bared flexible cord.
IMPORTANTThe wires in the mains lead are coloured in accordance with the followin\
g code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying\
 the terminals in your plug, 
proceed as follows:
The wire coloured BLUE must be connected to the terminal marked with the\
 letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with th\
e letter L or coloured
BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED
WITH THE LETTER E OR BY THE EARTH SYMBOL, OR COLOURED GREEN OR
GREEN AND YELLOW.
BN68-00801C-02Eng.qxd  2/25/05 9:55 AM  Page 65
 
						

							-AFTER SALES SERVICE
-Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
ELECTRONICS
BN68-00801C-02Eng.qxd  2/25/05 9:55 AM  Page 66