Samsung Le 26r51b Owners Instructions

							Dynamic Contrast is to automatically detect distribution of inputted
visual signal and adjust to create optimum contrast.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Picture.
Result
: The options available in the Picturegroup are
displayed.
3Press the ENTERbutton.
4Press the or  button to select Dynamic Contrast.
Press the 
ENTERbutton.
Result: The Dynamic Contrastmenu is displayed.
5Select Onby pressingthe or button.
Press the ENTERbutton. 
6When it has finished, press the EXITbutton to return to normal 
viewing.
This function doesnt work when source is in PC mode or
PIP is set to on.
Dynamic Contrast
English-29
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 29
 
						

							Brightness Sensor
Brightness Sensor is to adjust brightness of screen
either automatically or manually by detecting brightness of
surrounding environment using light detecting sensor.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Picture.
Result
: The options available in the Picturegroup are
displayed.
3Press the ENTERbutton.
4Press the or  button to select Brightness Sensor.
Press the ENTERbutton.
Result: The Brightness Sensormenu is displayed.
5Select Onby pressingthe or button.
Press the ENTERbutton.
Result
: Brightness on the screen is adjusted automatically 
according to brightness of surrounding environment.
6When it has finished, press the ENTERbutton to return to the
previous menu or press the EXITbutton to return to normal 
viewing.
This function doesnt work when source is in PC mode.
English-30
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 30
 
						

							English-31
You can display a sub picture within the main picture of set programme
or video input. In this way, you can watch the picture of set programme
or  video input from any connected equipment whiling watching the
main picture.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Picture.
Result
: The options available in the Picturegroup are
displayed.
3Press the ENTERbutton.
4Press the or  buttonto select PIPand then press theENTERbutton.
Result
: The options available in the PIPmenu are displayed.
5Press the ENTERbutton again. 
Select Onby pressing the  or  button and then press theENTERbutton.
6Press the or  button to select Source and press theENTERbutton. Select a source of the sub picture by pressing
the or button and press the ENTERbutton.
Result
: The sources are displayed in the following order: 
When the main picture is set to TV/Ext. 1/Ext. 2/AV/
S-Video/
Component, only HDMI can be selected and 
when the main picture is set to PC/HDMI, TV/Ext.1/ 
Ext.2/AV/S-Video/
Componentcan be selected. 
7Press the or  button to select Swap.To  interchange the main picture and the sub picture, select Swapoption and press the ENTERbutton.
Result
: The main picture and the sub picture are interchanged.
If main picture is in 
PCmode, Swapis not
available.
8Press the or  button to select Sizeof sub picture and then 
press the ENTERbutton.
Select a size of the sub picture by pressing the or  button and 
then press the 
ENTERbutton.
Result
: The sizes are displayed in the following order:
- -
Viewing the Picture In Picture (PIP)
[PC/HDMI]
[TV/Ext. 1/Ext. 2/AV/S-Video/Component]
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 31
is not
available.
If m\bin pi\fture is in PCmode, Size is not 
\bv\bil\bble.
“ownloaded5
						

							9Press the or  button to select Positionand then press theENTERbutton. 
Select the position of sub picture by pressing the or  button and
then press the 
ENTERbutton.
Result
:Y ou can move the sub picture.
When the size of the sub picture is set to  or  , this feature does not work.
10Press the or  button to select Programmeand then press theENTERbutton. You can select the channel that you want to view
through sub picture by pressing the or  button.
Press the 
ENTERbutton.
Result
: The memorized Programmeis displayed. 
Main: PC/HDMI, Sub: TV
“Programme” is inactive and not available in TV mode.
However, they become active and available in PC/HDMImode.
11To return to normal viewing, press the EXITbutton.
Remote-control functions while PIP is On:
Features Description
PIPUsed to operate On/Off function of PIP
directly.
SOURCEUsed to select a source of the sub picture.
SWAPUsed to interchange the main picture and the 
sub picture.
When the main picture is in the video
mode and the sub picture is in the TV
mode, you might not hear the sound of
main picture when pressing the 
SWAPbutton after changing the sub picture
channel. At this time, reselect the main
picture channel.
POSITIONYou also move the sub picture simply 
by pressing the POSITIONbutton.
SIZESelect a size of the sub picture by pressing the 
SIZEbutton.
SubTV Ext.1 Ext.2 AV
S-VideoComponentPC HDMIMainTV
Ext.1
Ext.2 AV
S-Video
Component PC
HDMIX
X
X
X
X
X
O
O X
X
X
X
X
X
O
O X
X
X
X
X
X
O
O X
X
X
X
X
X
O
O X
X
X
X
X
X
O
O X
X
X
X
X
X
O
O X
X
X
X
X
X
X
XO
O
O
O
O
O
X
X
V iewing the Picture In Picture (PIP)
English-32
[PC/HDMI]
PIP SettingsO: PIP operates
X:   PIP doesn’t operate
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 32
 
						

							English-33
Adjusting the Volume
You can adjust the volume using your remote control.
Press the  button to increase the volume.
Result
:A horizontal bar is displayed and the volume increases
until you release the button. The cursor moves to the right
to indicate the volume.
Press the  button to decrease the volume.
Result
:A horizontal bar is displayed and the volume decreases
until you release the button. The cursor moves to the left
to indicate the volume.
Additional sound adjustments are available on your set.
For further details, refer to pages 
34to 39.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 33
 
						

							English-34
Switching the Sound Off Temporarily
You can switch the sound off temporarily.
Example
:  You wish to answer the telephone.
1Press the MUTEbutton.
Result
:The sound is switched off and “Mute” is displayed.
2When you wish to turn the sound back on, press the MUTEbutton again or either of the volume buttons.
Result
: The sound comes back on at the same volume as before
and the “Mute” indication disappears.
Selecting the Sound Mode
You can set the sound mode by pressing the DUAL button.
When you press it, the current sound mode is displayed on the screen.
If the receiving conditions deteriorate, listening will be easier
if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs,
switch to 
Mono.
Default
Automatic change
DUAL 1
Automatic change
DUAL 1
Audio Type
Mono
Stereo Dual
Mono
Stereo
Dual
FM
Stereo
NICAM Stereo
DUAL 1/2
MONO
STEREO MONO
DUAL 1 DUAL 2 MONO
MONO STEREO MONO        DUAL 1 DUAL 2
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 34
 
						

							English-35
Changing the Sound Standard
Adjusting the Sound Settings
You can select the type of the special sound effect to be used when
watching a given broadcast.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Sound.
Result
: The options available in the Soundgroup are displayed.
3Press the ENTERbutton.
4Press the ENTERbutton again.
Result
: The Modeis selected.
5Select the required sound effect by pressing the or  button
repeatedly and then press the ENTERbutton.
Result
: The following sound effects are available: Standard - Music - Movie - Speech - Custom 
6When you are satisfied with the setting, press the MENUbutton
to return to the previous menu or press the EXITbutton to return to
normal viewing.
Y ou can also select these options by simply pressing the
S.MODE(Sound Mode) button on the remote control.
The sound settings can be adjusted to suit your personal preferences.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Sound.
Result
: The options available in the Soundgroup are displayed.
3Press the ENTERbutton.
4Select Equalizerby pressing the or  button and then press
the ENTERbutton.
5Select the required option by pressing the  or  button.  
6Press the  or  button to reach the required setting.
Press the 
ENTERbutton.
7When you are satisfied with the setting, press the MENUbutton
to return to the previous menu or press the EXITbutton to return to
normal viewing.
If you make any changes to these settings, the Sound Mode is
automatically switched to 
Custom.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 35
 
						

							Setting the TruSurround XT (SRS TSXT)
TruSurround XT is a patented SRS technology that solves the problem
of playing 5.1 multichannel content over two speakers.
T rusurround delivers a compelling,virtual surround sound experience
through any two-speaker playback system, including internal television
speakers. It is fully compatible with all multichannel formats.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Sound.
Result
: The options available in the Soundgroup are displayed.
3Press the ENTERbutton.
4Press the or  button to select SRS TSXTand then
press the  ENTERbutton.
5Select the required option by pressing the or  button.
Press the ENTERbutton.
Result
: The sources are displayed in the following order: Off - 3D Mono - Stereo
6Press the EXITbutton to return to normal viewing.
You can also set these options simply by pressing the SRS button
on remote control.
T ruSurround XT, SRS and symbol are trademarks of SRS Labs,
Inc. TruSurround XT technology is incorporated under license from
SRS Labs, Inc.
English-36
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 36
 
						

							Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it is no\
t
easy for you to adjust the volume every time the channel is changed.
This feature let you automatically adjust the volume of the desired
channel by lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation signal is low.
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Sound.
Press the ENTERbutton.
Result: The options available in the Soundgroup are displayed.
3Press the or  button to select Auto Volume.Press the ENTERbutton.
4Press the or  button to select On.
Press the ENTERbutton.
5Press the EXITbutton to return to normal viewing.
English-37
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 37
 
						

							English-38
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
Plug a set of headphones into the 3.5mm mini-jack socket on the rear pan\
el
of the set.
Result
:The sound is heard through the headphones.
For further details on how to set your headphone preferences,
refer to the section below.
When you insert the head set jack into the corresponding port,
you can operate only 
SRS TSXT, Internal Muteand Sound Select (in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may damage  your hearing.
Y ou will not receive sound from the speakers when you
connect headphones to the system.
Selecting the Internal Mute
If you want to hear the sound through separate speakers,
cancel the internal amplifier. 
1Press the MENUbutton.
Result
: The main menu is displayed.
2Press the or  button to select Sound.
Result
: The options available in the Soundgroup are displayed.
3Press the ENTERbutton.
4Press the or  button to selectInternal Mute.Press the ENTERbutton.
5Press the or  button to select On.Press the ENTERbutton.
6Press the EXITbutton to return to normal viewing.
When Internal Muteis set to On, the Sound menus except for
Sound Select (in PIP mode) cannot be adjusted.
BN68-00801C-02Eng.qxd  2/25/05 9:54 AM  Page 38