Sharp AR M165E User Manual
Have a look at the manual Sharp AR M165E User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
84
KEY OPERATORS GUIDE
Select MESSAGE TIME and press the [OK] key. The
following screen will appear.
1Select the desired display time with the
[ ] or [ ] key.
2Press the [OK] key.
KEY TOUCH SOUND
This program is used to set the volume of the key
touch sound that is heard each time a key is pressed.
The initial factory setting is LOW.
Select KEY TOUCH SOUND and press the [OK] key.
The following screen will appear.
1Select the desired volume with the [ ] or
[ ] key.
To turn the key touch sound off,...](http://img.usermanuals.tech/thumb/68/37856/w64_Sharp_AR-M165E-85.png "Page 86
84
KEY OPERATORS GUIDE
Select MESSAGE TIME and press the [OK] key. The
following screen will appear.
1Select the desired display time with the
[ ] or [ ] key.
2Press the [OK] key.
KEY TOUCH SOUND
This program is used to set the volume of the key
touch sound that is heard each time a key is pressed.
The initial factory setting is LOW.
Select KEY TOUCH SOUND and press the [OK] key.
The following screen will appear.
1Select the desired volume with the [ ] or
[ ] key.
To turn the key touch sound off,...")
![Page 87
85
KEY OPERATORS GUIDE
7
To enable the setting, select DISABLE PAPER
SIZE SET and press the [OK] key so that a
checkmark appears in the checkbox.
To disable the setting, select DISABLE PAPER
SIZE SET once again and press the [OK] key so
that the checkmark is cleared from the checkbox.
ENERGY SAVE
These programs are used to configure energy saving
settings. To access one of these programs, select
ENERGY SAVE in the mode selection screen, and
select the desired program in the energy save screen,...](http://img.usermanuals.tech/thumb/68/37856/w64_Sharp_AR-M165E-86.png "Page 87
85
KEY OPERATORS GUIDE
7
To enable the setting, select DISABLE PAPER
SIZE SET and press the [OK] key so that a
checkmark appears in the checkbox.
To disable the setting, select DISABLE PAPER
SIZE SET once again and press the [OK] key so
that the checkmark is cleared from the checkbox.
ENERGY SAVE
These programs are used to configure energy saving
settings. To access one of these programs, select
ENERGY SAVE in the mode selection screen, and
select the desired program in the energy save screen,...")
![Page 88
86
KEY OPERATORS GUIDE
COPY SETTINGS
These programs are used to enable various copy
functions. To access one of these programs, select
COPIER in the mode selection screen, select the
desired program in the copy settings screen, and
press the [OK] key.
EXPOSURE ADJUST
This program is used to adjust the exposure level
when AUTO is used for the exposure mode. The
auto exposure level can be set separately for the
document glass and the SPF.
One of five levels can be selected, with the left end of
the...](http://img.usermanuals.tech/thumb/68/37856/w64_Sharp_AR-M165E-87.png "Page 88
86
KEY OPERATORS GUIDE
COPY SETTINGS
These programs are used to enable various copy
functions. To access one of these programs, select
COPIER in the mode selection screen, select the
desired program in the copy settings screen, and
press the [OK] key.
EXPOSURE ADJUST
This program is used to adjust the exposure level
when AUTO is used for the exposure mode. The
auto exposure level can be set separately for the
document glass and the SPF.
One of five levels can be selected, with the left end of
the...")
![Page 89
87
KEY OPERATORS GUIDE
7
Select DEFAULT TRAY SET and press the [OK] key.
The following screen will appear.
1Select the tray with the [ ] or [ ] key.
2Press the [OK] key.
DEFAULT EXPOSURE
This program is used to select the exposure
mode/level that is initially selected when the
[EXPOSURE] key is pressed.
The factory default setting is AUTO.
Select DEFAULT EXPOSURE and press the [OK]
key. The following screen will appear.
1Select the exposure mode with the [ ] or
[ ] key.
2If you selected TEXT or...](http://img.usermanuals.tech/thumb/68/37856/w64_Sharp_AR-M165E-88.png "Page 89
87
KEY OPERATORS GUIDE
7
Select DEFAULT TRAY SET and press the [OK] key.
The following screen will appear.
1Select the tray with the [ ] or [ ] key.
2Press the [OK] key.
DEFAULT EXPOSURE
This program is used to select the exposure
mode/level that is initially selected when the
[EXPOSURE] key is pressed.
The factory default setting is AUTO.
Select DEFAULT EXPOSURE and press the [OK]
key. The following screen will appear.
1Select the exposure mode with the [ ] or
[ ] key.
2If you selected TEXT or...")
![Page 90
88
KEY OPERATORS GUIDE
RESOLUTION IN AUTO/TEXT MODE
This program is used to set the resolution used when
the exposure mode is set to AUTO or TEXT. When
300dpi is selected, the first copy time is shorter than
when 600dpi is selected.
The factory default setting is 300dpi.
Select RESOLUTION IN AUTO/TEXT MODE and
press the [OK] key. The following screen will appear.
1Press the [ ] or [ ] key to select the
resolution.
2Press the [OK] key.
PHOTO MODE DEFAULT
This program is used to select the method of...](http://img.usermanuals.tech/thumb/68/37856/w64_Sharp_AR-M165E-89.png "Page 90
88
KEY OPERATORS GUIDE
RESOLUTION IN AUTO/TEXT MODE
This program is used to set the resolution used when
the exposure mode is set to AUTO or TEXT. When
300dpi is selected, the first copy time is shorter than
when 600dpi is selected.
The factory default setting is 300dpi.
Select RESOLUTION IN AUTO/TEXT MODE and
press the [OK] key. The following screen will appear.
1Press the [ ] or [ ] key to select the
resolution.
2Press the [OK] key.
PHOTO MODE DEFAULT
This program is used to select the method of...")
89
MATERIAL SAFETY DATA SHEET Page : 1/4
Date Revised : Aug.18, 2003
Date Issued : Jun. 1, 2003
MSDS No. F-01211
1.PRODUCT AND COMPANY IDENTIFICATION
Product Name : AR-202NT / AR-202T / AR-202ST / AR-202FT / AR-202ST-C / AR-203ST-C /
AR-016T/ AR-016ST / AR-016FT / AR-016RT (Black Toner)
Supplier Identification : Sharp Corporation
22-22 Nagaike-cho, Abeno-ku, Osaka, Japan
Local suppliers are listed below. Please contact the nearest supplier for additional information.
Area (Country) (Name and Telephone Number)
U.S.A. Sharp Electronics Corporation
Sharp Plaza, Mahwah, NJ
Telephone number for information : 1-800-237-4277
Emergency telephone number : 1-800-255-3924
North
America
Canada Sharp Electronics of Canada Ltd.
Telephone number for information : 905-890-2100
Emergency telephone number : 1-800-255-3924
Oceania Australia Sharp Corporation of Australia PTY. Ltd.
No1 Huntingwood Drive Huntingwood Blacktown N.S.W.
Telephone number for information : 1300-13-50-22
Germany Sharp Electronics (Europe) GMBH
Sonninstrasse 3, 20097 Hamburg
Telephone number to access MSDS : 040-2376-2185
For more information : 040-2376-2613
United
Kingdom Sharp Electronics (U. K.) Ltd.
Telephone number for information : 08705-274-277
France Sharp Electronics France S.A.
Telephone number for information : 01-49-90-34-00
Austria Sharp Electronics GMBH
Telephone number for information : 01-727-19-0
Italy Sharp Electronics (Italy) S.P.A.
Telephone number for information : 02895951
Spain Sharp Electronics (Espana) S.A.
Telephone number for information : 93-581-97-00
Netherlands Sharp Electronics Benelux B.V.
Telephone number for information : 30-6359500
Sweden Sharp Electronics Nordic AB
Telephone number for information : 08-634-36-00
Europe
Switzerland Sharp Electronics(Schweiz)AG
Telephone number for information : 01-846-6111
Middle
East U.A.E. Sharp Middle East FZE
P.O.Box 17115 Jebel Ali, Dubai
Telephone number for information : 04-815311
2.COMPOSITION / INFORMATION ON INGREDIENTS
Substance[ ] Preparation[X]
Ingredient
CAS No. Proportion OSHA PEL ACGIH TLV MAK-TWA NOHSC-TWA
Styrene-Acrylate
copolymer
Carbon black
Iron oxide
Metal Complex dye*29497-14-1
1333-86-4
1309-38-2
109125-51-1
84179-66-8 85-95 %
5-10 %
1-5 %
< 2 %Not listed
3.5mg/m
3
Not listed
0.5mg/m3
Not listed
3.5mg/m
3
Not listed
0.5mg/m3
Not listed
Not listed
Not listed
Not listedNot listed
3mg/m
3
Not listed
Not listed
* EC N0. : 400-110-2, Symbol letter : F, R Phrase : R11
Pegasus-E_Copy_Ex.book 89 ページ ２００４年９月２３日 木曜日 午前１１時４１分
Downloaded From ManualsPrinter.com Manuals
90 MATERIAL SAFETY DATA SHEET Page : 2/4 Date Revised : Aug.18, 2003 Date Issued : Jun. 1, 2003 MSDS No. F-01211 3.HAZARDS IDENTIFICATION Most Important Hazards and Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests performed using toner. When used as intended according to instructions, studies do not indicate any symptoms of fibrosis will occur. Environmental Effects : No data are available. Specific Hazards : Dust explosion (like most finely divided organic powders) Directive 1999/45/EC(Europe) : Not classified as dangerous 4.FIRST-AID MEASURES Route(s) of Entry : Inhalation? Skin? Ingestion? Yes No Possible but very unusual. Inhalation : Remove to fresh air. If symptoms occur, consult medical personnel. Skin Contact : Wash with soap and water for 15 minutes or until particle is removed. If irritation does occur, consult medical personnel. Eye Contact : Flush eyes immediately with water for 15 minutes. If irritation does occur, consult medical personnel. Ingestion : Rinse with water and drink several glasses of water. If irritation or discomfort does occur, consult medical personnel. 5.FIRE-FIGHTING MEASURES Extinguishing Media : Water, CO2, foam and dry chemicals Special Fire Fighting Procedures : None Fire and Explosion Hazards : Toner material, like most finely divided organic powders, may form an explosive mixture. 6.ACCIDENTAL RELEASE MEASURES Personal Precautions : None Environmental Precautions : None Methods for Cleaning Up : Wipe off with paper or cloth. Do not use vacuum cleaner when a large amount is released. It, like most finely divided organic powders, is capable of creating a dust explosion. 7.HANDLING AND STORAGE Handling Technical Measures : None Precautions : None Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust. Try not to disperse the particles. Storage Technical Measures : None Storage Conditions : Keep container closed and Store in a cool and dry place. Keep out of the reach of children. Incompatible Products : None 8.EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Measures Ventilation : Not required under intended use. Pegasus-E_Copy_Ex.book 90 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
91 MATERIAL SAFETY DATA SHEET Page : 3/4 Date Revised : Aug.18, 2003 Date Issued : Jun. 1, 2003 MSDS No. F-01211 Exposure Limit Values OSHA-PEL(USA) : 15mg/m3 (Total Dust), 5mg/m3 (Respirable Dust) ACGIH-TLV(USA) : 10mg/m3 (Total Dust), 3mg/m3 (Respirable Dust) Personal Protective Equipment Respiratory Protection : Not required under intended use. Hand Protection : Not required under intended use. Eye Protection : Not required under intended use. Skin Protection : Not required under intended use. Other Protective Equipment : Use of a dust mask and goggles are recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust. 9.PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical State : Solid Form : Powder Color : Black Odor : odorless Ph : Not applicable Boiling / Melting Point : Not applicable Softening Point(°C) : 100 - 130 Flash Point(°C) : Not applicable lgnition Point(°C ) : > 350 Explosion Properties : No data Density(g/cm³) : 1.1 (bulk density : 0.35) Solubility in Water : Negligible 10.STABILITY AND REACTIVITY Stability : Stable Hazardous Reactions : Dust explosion, like most finely divided organic powders. Conditions to Avoid : Electric discharge, throwing into fire. Materials to Avoid : Oxidizing Materials Hazardous Decomposition Products : CO, CO 2 and NOX Further Information : None 11.TOXICOLOGICAL INFORMATION Acute Toxicity Ingestion(oral) : LD 50 > 2500mg/kg (Rats) Inhalation : No Data Eye irritation : Not an irritant (Rabbits) Skin irritation : Not an irritant (Rabbits) Skin sensitizer : No sensitization Mutagenicity : Negative (Ames Test) Carcinogenicity : In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This classification is given to chemicals for which there is inadequate human evidence, but sufficient animal evidence on which to base an opinion of carcinogenicity. The classification is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung. Studies performed in animal models other than rats did not show any association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats. Pegasus-E_Copy_Ex.book 91 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
92 MATERIAL SAFETY DATA SHEET Page : 4/4 Date Revised : Aug.18, 2003 Date Issued : Jun. 1, 2003 MSDS No. F-01211 Chronic Effect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of the rats in the high concentration (16mg/m3) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle (4mg/m 3) exposure group, but no pulmonary change was reported in the lowest (1mg/m3) exposure group, the most relevant level to potential human exposures. 12.ECOLOGICAL INFORMATION No data are available. 13.DISPOSAL CONSIDERATIONS Waste from Residues : Waste material may be dumped or incinerated under conditions which meet all federal, state and local environmental regulations. Contaminated Packaging : Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations. 14.TRANSPORT INFORMATION UN Classification : None Not classified as hazardous for transport. 15.REGULATORY INFORMATION US Information TSCA(Toxic Substances Control Act) : All chemical substances in this product comply with all applicable rules or order under TSCA. SARA(Superfund Amendments and Reauthorization Act) Title III 302 Extreme Hazardous Substance : None 311/312 Hazard Classification : None EU Information 1999/45/EC and 67/548/EEC Symbol & Indication : Not required R-Phrase : Not required 76/769/EEC : All chemical substances in this product comply with all applicable rules or order under 76/769/EEC. 16.OTHER INFORMATION NFPA Rating (USA) : Health=1 Flammability=1 Reactivity=0 WHMIS Legislation (Canada) : This product is not a controlled product. List of R phrases : R11 : Highly flammable References IARC(1996) : IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. 65, Printing Process And Printing Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149-261 H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp.280-299. The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. However, all materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist. Pegasus-E_Copy_Ex.book 92 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
93 MATERIAL SAFETY DATA SHEET Page : 1/4 Date Issued :Jun. 1, 2003 MSDS No. F-31211 1.PRODUCT AND COMPANY IDENTIFICATION Product Name : AR-202ND / AR-202DV / AR-202SD / AR-202SD-C (Black Developer) Supplier Identification : Sharp Corporation 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan Local suppliers are listed below. Please contact the nearest supplier for additional information. Area (Country) (Name and Telephone Number) U.S.A. Sharp Electronics Corporation Sharp Plaza, Mahwah, NJ Telephone number for information : 1-800-237-4277 Emergency telephone number : 1-800-255-3924 North America Canada Sharp Electronics of Canada Ltd. Telephone number for information : 905-890-2100 Emergency telephone number : 1-800-255-3924 Oceania Australia Sharp Corporation of Australia PTY. Ltd. No1 Huntingwood Drive Huntingwood Blacktown N.S.W. Telephone number for information : 1300-13-50-22 Germany Sharp Electronics (Europe) GMBH Sonninstrasse 3, 20097 Hamburg Telephone number to access MSDS : 040-2376-2185 For more information : 040-2376-2613 United Kingdom Sharp Electronics (U. K.) Ltd. Telephone number for information : 08705-274-277 France Sharp Electronics France S.A. Telephone number for information : 01-49-90-34-00 Austria Sharp Electronics GMBH Telephone number for information : 01-727-19-0 Italy Sharp Electronics (Italy) S.P.A. Telephone number for information : 02895951 Spain Sharp Electronics (Espana) S.A. Telephone number for information : 93-581-97-00 Netherlands Sharp Electronics Benelux B.V. Telephone number for information : 30-6359500 Sweden Sharp Electronics Nordic AB Telephone number for information : 08-634-36-00 Europe Switzerland Sharp Electronics(Schweiz)AG Telephone number for information : 01-846-6111 Middle East U.A.E. Sharp Middle East FZE P.O.Box 17115 Jebel Ali, Dubai Telephone number for information : 04-815311 2.COMPOSITION / INFORMATION ON INGREDIENTS Substance[ ] Preparation[X] Ingredient CAS No. Proportion OSHA PEL ACGIH TLV MAK-TWA NOHSC-TWA Iron powder 7439-89-6 > 90 % Not listed Not listed Not listed Not listed Styrene-Acrylate copolymer 29497-14-1 5-10 % Not listed Not listed Not listed Not listed Carbon black 1333-86-4 < 1 % 3.5mg/m 33.5mg/m3Not listed 3mg/m3 Pegasus-E_Copy_Ex.book 93 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
94 MATERIAL SAFETY DATA SHEET Page : 2/4 Date Issued :Jun. 1, 2003 MSDS No. F-31211 3.HAZARDS IDENTIFICATION Most Important Hazards and Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests performed using toner. When used as intended according to instructions, studies do not indicate any symptoms of fibrosis will occur. Environmental Effects : No data are available. Specific Hazards : Dust explosion (like most finely divided organic powders) Directive 1999/45/EC(Europe) : Not classified as dangerous 4.FIRST-AID MEASURES Route(s) of Entry : Inhalation? Skin? Ingestion? No No Possible but very unusual. Inhalation : Remove to fresh air. If symptoms occur, consult medical personnel. Skin Contact : Wash with soap and water for 15 minutes or until particle is removed. If irritation does occur, consult medical personnel. Eye Contact : Flush eyes immediately with water for 15 minutes. If irritation does occur, consult medical personnel. Ingestion : Rinse with water and drink several glasses of water. If irritation or discomfort does occur, consult medical personnel. 5.FIRE-FIGHTING MEASURES Extinguishing Media : Water, CO2, foam and dry chemicals Special Fire Fighting Procedures : None Fire and Explosion Hazards : Toner material, like most finely divided organic powders, may form an explosive mixture. 6.ACCIDENTAL RELEASE MEASURES Personal Precautions : None Environmental Precautions : None Methods for Cleaning Up : Wipe off with paper or cloth. Do not use vacuum cleaner when a large amount is released. It, like most finely divided organic powders, is capable of creating a dust explosion. 7.HANDLING AND STORAGE Handling Technical Measures : None Precautions : None Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust. Try not to disperse the particles. Storage Technical Measures : None Storage Conditions : Keep container closed and Store in a cool and dry place. Keep out of the reach of children. Incompatible Products : None 8.EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Measures Ventilation : Not required under intended use. Pegasus-E_Copy_Ex.book 94 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
95 MATERIAL SAFETY DATA SHEET Page : 3/4 Date Issued :Jun. 1, 2003 MSDS No. F-31211 Exposure Limit Values OSHA-PEL(USA) : 15mg/m3 (Total Dust), 5mg/m3 (Respirable Dust) ACGIH-TLV(USA) : 10mg/m3 (Total Dust), 3mg/m3 (Respirable Dust) Personal Protective Equipment Respiratory Protection : Not required under intended use. Hand Protection : Not required under intended use. Eye Protection : Not required under intended use. Skin Protection : Not required under intended use. Other Protective Equipment : Use of a dust mask and goggles are recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust. 9.PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical State : Solid Form : Powder Color : Black Odor : odorless Ph : Not applicable Boiling / Melting Point : Not applicable Flash Point(°C) : Not applicable lgnition Point(°C ) : No data Explosion Properties : No data Density(g/cm³) : 7.3 (bulk density : 2.0) Solubility in Water : Negligible 10.STABILITY AND REACTIVITY Stability : Stable Hazardous Reactions : Dust explosion, like most finely divided organic powders. Conditions to Avoid : Electric discharge, throwing into fire. Materials to Avoid : Oxidizing Materials Hazardous Decomposition Products : CO, CO 2 and NOX Further Information : None 11.TOXICOLOGICAL INFORMATION Acute Toxicity Ingestion(oral) : LD 50 > 2500mg/kg (Rats) Inhalation : No data Eye irritation : No data Skin irritation : Not an irritant (Rabbits) Skin sensitizer : No sensitization Mutagenicity : Negative (Ames Test) Carcinogenicity : In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This classification is given to chemicals for which there is inadequate human evidence, but sufficient animal evidence on which to base an opinion of carcinogenicity. The classification is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung. Studies performed in animal models other than rats did not show any association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats. Pegasus-E_Copy_Ex.book 95 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
96 MATERIAL SAFETY DATA SHEET Page : 4/4 Date Issued :Jun. 1, 2003 MSDS No. F-31211 Chronic Effect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of the rats in the high concentration (16mg/m3) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle (4mg/m 3) exposure group, but no pulmonary change was reported in the lowest (1mg/m3) exposure group, the most relevant level to potential human exposures. 12.ECOLOGICAL INFORMATION No data are available. 13.DISPOSAL CONSIDERATIONS Waste from Residues : Waste material may be dumped or incinerated under conditions which meet all federal, state and local environmental regulations. Contaminated Packaging : Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations. 14.TRANSPORT INFORMATION UN Classification : None Not classified as hazardous for transport. 15.REGULATORY INFORMATION US Information TSCA(Toxic Substances Control Act) : All chemical substances in this product comply with all applicable rules or order under TSCA. SARA(Superfund Amendments and Reauthorization Act) Title III 302 Extreme Hazardous Substance : None 311/312 Hazard Classification : None EU Information 1999/45/EC and 67/548/EEC Symbol & Indication : Not required R-Phrase : Not required 76/769/EEC : All chemical substances in this product comply with all applicable rules or order under 76/769/EEC. 16.OTHER INFORMATION NFPA Rating (USA) : Health=1 Flammability=1 Reactivity=0 WHMIS Legislation (Canada) : This product is not a controlled product. References IARC(1996) : IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. 65, Printing Process And Printing Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149-261 H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp.280-299. The information on this data sheet represents our current data and best opinion as to the proper use in handling of this product under normal conditions. However, all materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist. Pegasus-E_Copy_Ex.book 96 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
97 INDEX Symbols / Numbers [ ] key .....................................................................15 2 in 1 / 4 in 1 copy .....................................................66 250-sheet paper feed unit / 2 x 250-sheet paper feed unit.....41 [2-SIDED COPY] key ................................................15 2-sided printing..........................................................18 A [ACC.#-C] key .....................................................15, 23 Arrow keys ................................................................15 Auditing mode ...........................................................23 Auto clear ......................................................17, 46, 83 [AUTO IMAGE] key ...................................................15 Auto paper select mode ............................................47 Auto power shut-off ...................................................85 Auto power shut-off mode .........................................17 Auto power shut-off timer ..........................................85 Auto tray switching ..............................................22, 49 B [BACK] key ................................................................14 Base screen ..............................................................18 Beep ..........................................................................84 Bypass tray .............................................13, 18, 20, 61 Bypass tray extension .........................................13, 20 Bypass tray guides ..............................................13, 20 Bypass tray paper feed roller ....................................37 C [C] key .................................................................14, 46 [CA] key...............................................................15, 18 Card shot...................................................................71 Centre tray ................................................................12 Charger cleaner ..................................................12, 38 Checking the total output count.................................36 Cleaning the machine - Bypass tray paper feed roller ..............................37 - Document glass and SPF/document cover .........37 - Transfer charger .................................................38 Cleaning the transfer charger....................................38 Copy functions ..........................................................45 [COPY] key / indicator ...............................................14 Copy number display ................................................14 [COPY RATIO] key ...................................................15 D DATA indicator ................................................... 14, 15 Default settings ........................................................ 18 Developer replacement required icon ...................... 28 Disable auto paper selection .................................... 88 Display ......................................................... 14, 16, 39 Document cover ....................................................... 13 - Cleaning ............................................................. 37 - Removing ........................................................... 47 Document feeder tray ............................................... 13 Document glass ................................................. 12, 45 - Cleaning ............................................................. 37 - Normal copying .................................................. 45 - Two-sided copies of one-sided originals ............ 58 Dual page copy ........................................................ 62 E Envelopes ................................................................ 20 Erase copy ............................................................... 69 Exit area ................................................................... 13 Exposure - Making a copy darker or lighter .......................... 48 [EXPOSURE] key ............................................... 15, 48 F [FAX] key / indicator ................................................. 15 [FAX STATUS] key .................................................. 14 Features ................................................................... 10 Feeding roller cover ........................................... 13, 29 Front cover ............................................................... 12 Fusing unit paper guide ...................................... 13, 33 Fusing unit release levers .................................. 13, 32 G Glass cleaner ..................................................... 12, 37 H Handles .................................................................... 12 I Indicators and display messages ............................. 28 Installation requirements ............................................ 8 INTERRUPT indicator ........................................ 14, 63 [INTERRUPT] key .................................................... 14 J Job separator tray kit ................................................ 12 K Key operator code .................................................... 75 Key operator program list ......................................... 77 Key operator programs ............................................ 75 Pegasus-E_Copy_Ex.book 97 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals
98 L LINE indicator............................................................15 LINE STATUS indicator ............................................15 Loading paper ...........................................................18 Loading paper in the bypass tray ..............................20 M Main features ............................................................10 Maintenance icon ......................................................28 Manuals provided with the product .............................9 Margin shift................................................................68 Message....................................................................28 Misfeed removal ........................................................29 - Bypass tray .........................................................30 - In the machine ....................................................31 - SPF .....................................................................29 - Tray 1 ..................................................................33 - Tray 2 ..................................................................34 N Normal copying - Copying from the document glass ......................45 - Copying from the SPF .........................................46 Numeric keys ............................................................14 O Offset function .....................................................63, 65 [OK] key ....................................................................14 ONLINE indicator ......................................................14 Operation in copy, print, scan, and fax modes ..........16 Operation panel...................................................12, 14 Original guides ....................................................13, 46 Original misfeed ........................................................29 [OUTPUT] key ...........................................................15 P Paper.........................................................................18 [PAPER SELECT] key ..............................................15 Parallel port ...............................................................12 Part names and functions .........................................12 Photoconductive drum ..............................................13 Power off ...................................................................17 Power on ...................................................................17 Power save modes....................................................17 Power switch .......................................................12, 17 Preheat mode............................................................17 Press the [INTERRUPT] key. ....................................63 [PRINT] key / indicator ..............................................14 Problem .....................................................................25 Product configurations ................................................3 R [READ-END] key ...................................................... 15 Reducing or enlarging a copy - Automatic ratio selection .................................... 52 - Preset copy ratios/zoom..................................... 52 - XY zoom copying ............................................... 54 Removing the document cover ................................ 47 Replacing the toner cartridge ................................... 35 Reversing tray .................................................... 13, 29 Right side cover ................................................. 13, 29 Roller rotating knob ...................................... 13, 31, 32 Rotation copy ........................................................... 64 RSPF - One-sided copies of two-sided originals ............ 60 - Two-sided copies of two-sided originals ............ 59 S [SCAN] key / indicator .............................................. 14 Selecting the tray ..................................................... 49 Setting the number of copies ................................... 49 Side cover ................................................................ 13 Side cover handle .................................................... 13 [SPECIAL FUNCTION] key ...................................... 15 Specifications ........................................................... 73 SPF .......................................................................... 46 - Acceptable originals ........................................... 47 - Cleaning ............................................................. 37 - Original misfeed ................................................. 29 - Two-sided copying of one-sided originals .......... 57 Standard sizes ......................................................... 50 [START] indicator ..................................................... 15 [START] key ....................................................... 15, 46 Storage of supplies .................................................. 42 Stream feeding ......................................................... 87 Stream feeding mode ............................................... 46 T Toner cartridge ................................................... 13, 35 Toner cartridge lock release lever ...................... 13, 35 Toner cartridge replacement required icon .............. 28 Top tray .................................................................... 12 Tray 1 ....................................................................... 12 Tray 2 ....................................................................... 12 Troubleshooting - Machine/copying problems ................................ 25 Troubleshooting and maintenance ........................... 24 Two-sided copies using the bypass tray .................. 61 Two-sided copying ................................................... 56 U USB 1.1 port (USB-1) ............................................... 12 USB 2.0 (Hi-Speed mode) ....................................... 83 USB 2.0 port (USB-2) ............................................... 12 Z Zoom ........................................................................ 52 Pegasus-E_Copy_Ex.book 98 ページ ２００４年９月２３日 木曜日 午前１１時４１分 Downloaded From ManualsPrinter.com Manuals