Sharp Ux A255 Thermal Transfer Plain Paper Fax With All Digi Operation Manual

							99
SHARP
Date Revised: .Date Issued :July. 3. 2001
MATERIAL SAFETY DATA SHEET (2/2)MSDS No. B-1026
Section 6. Accidental Release Measures
Rumpling the product may cause the wax layer to peel off. Sweep up or vacuum. When sweeping, avoid
raising film or dust. If a vacuum is used , motor should be rated as dust tight. Wash any residue off skin with
soap and water. Garments may be wasted or dry cleaned after removal of loose film or dust.
Section 7. Handling and Storage
No special precautions for safety reason.
Store in cool, dry place ,avoid direct sunlight.
Section 8. Exposure Control/Personal Protection
Ventilation:None
Eye Protection:None
Protective Clothing:None
Gloves:None
Section 9. Physical and Chemical Properties
Description:Not applicable
Melting Point:71°CFreezing Point:None
Pressurized:NoneBoiling Point:None
pH:NoneSpecific Gravity (H20 = 1):about 1.2
Evaporation Rate:NegligibleWater Solubility:Not applicable
Volatility:None
Section 10. Stability and Reactivity
Stability:Stable
Conditions to Avoid:None
Incompatibility(Materials to Avoid):None
Hazardous Decomposition or Byproducts:CO, CO2, NOX and H2O
Hazardous Polymerization:Will not occur
Section 11. Toxicological Information
Acute Toxicity:None
Chronic Toxicity:None
Section 12. Ecological Information
No environmental effect at normal use.
Section 13. Disposal Consideration
Dispose by the same method of ordinary plastic products in accordance with all applicable regulations. Any
disposal practice must be in compliance with local, state and federal laws and regulations. If necessary,
contact government office and ensure conformity with disposal regulations.
Section 14. Transport Information
No specific precautionary transport measure for safety reasons.
As to storage conditions, see section 7.
Section 15. Regulatory Information
None
Section 16. Other Information
The information herein is given in good faith, but no warranty, if used any process.
Final determination of suitability of any material is the sole responsibility of the user.
Although certain information are described herein, we cannot guarantee, that these are the only hazard, which exist.Information on this data sheet represents our current data and best opinion as to the proper use in handling of
this product under normal conditions.
Restrictions: This information relates only to the specific material designated as supplied by the manufacturer. This
information is supplied to us by the manufacturer and Sharp offers no warranties as to its accuracy and
accepts no responsibilities for any typographical errors which may appear on these sheets. It is the
responsibility of the user to determine the suitability of this product for each particular use.

(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦


¦
¦


						

							100
Quick Reference Guide
Sending Faxes
Place your document 
(up to 10 pages) face 
down in the document 
feeder.
Normal Dialing 
1. Lift the handset or press  .
2. Dial the fax number. 
3. Wait for the reception tone (if a person 
answers, ask them to press their Start 
key). 
4. Press  .
Automatic Dialing
1. Press   or   until the desired des-
tination appears in the display.
2. Press  .
Direct Keypad Dialing  
1. Dial the fax number. 
2. Press .
Recording an Outgoing 
Message
1. Press  ,  , and  .
2. Lift the handset, press  , and 
speak into the handset.
3. When finished, press  .
SPEAKER
START/MEMORY
START/MEMORY
START/MEMORY
REC/
MEMO
START/MEMORY
STOP
Receiving Faxes
Press   until the arrow in the 
display points to the desired reception 
mode.
FAX mode: The fax machine automatically 
answers and receives faxes.
TEL mode: Answer all calls (even faxes) 
by picking up the handset. To begin fax 
reception, press  .
TAD mode: Select this mode when you go 
out to receive both voice messages and 
fa xes.
Storing Auto Dial Numbers
1. Press   once and   twice.
2. Enter the full fax/phone number.
3. Press .
4. Enter a name by pressing number keys.
 
(To enter two letters in succession that 
require the same key, press   after 
entering the first letter.)
5. Press   and then  .
RESOLUTION/
RECEPTION MODE
START/MEMORY
FUNCTION
START/MEMORY
START/MEMORYSTOP
FAX TELJAN-01 10:30
FAX TELJAN-01 10:30
FAX TELJAN-01 10:30TAD
TAD TAD
RESOLUTION/
RECEPTION MODE
A =B =
C =
D =E =F =
G =H =I  =J =K =L =M =
N =O =P =Q =R =S =T =
U =V =W =X =Y =Z =
SPACE =

(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦ø÷÷
¦
¦


						

							101
Guía de referencia rápida
Transmisión de mensajes telefax
Coloque el original 
(hasta 10 páginas) cara 
abajo en el alimentador 
de documentos.
Marcación normal  
1.
Levante el auricular u oprima: .
2.
Marque el número de telefax. 
3.
Espere hasta escuchar el tono de 
recepción (si contestara una persona, 
pídale oprimir su tecla Start). 
4. Oprima: .
Marcación automática
1. Oprima la tecla de flecha   o   
hasta que en el visor aparazca el destino 
deseado.
2. 
Oprima: .
Marcación directa por teclado  
1.
Marque el número de fax. 
2.Oprima: .
Grabacion de un mensaje de 
bienvenida
1. Oprima la tecla  , tecla de flecha 
, y  .
2. Levante el auricular, 
oprima la tecla  
 y hable en el microtel
éfono.
3. 
Oprima la tecla   cuando haya 
finalizado.
SPEAKER
START/MEMORY
START/MEMORY
START/MEMORY
REC/
MEMO
START/MEMORY
STOP
Recepción de mensajes telefax
Oprima  hasta que la flecha que 
hay en el display señale hacia el número de 
recepción deseado
Modo FAX: El aparato telefax contesta y 
transmite automáticamente mensajes telefax.
Modo TEL: Responda a todas las llamadas 
(incluso mensajes de fax), levantando el 
auricular. Para iniciar la recepción de fax, 
oprima
 .
Modo TAD: 
Seleccione este modo cuando 
salga para recibir tanto mensajes hablados 
como telefax.
Memorizar números marc. 
automática
1. Oprima  una vez y  dos veces.
2.Introduzca el número de telefax/teléfono 
completo.
3.Oprima: .
4. 
Ingrese el nombre oprimiendo las teclas 
numéricas. (Para ingresar sucesivamente 
dos letras que requieren la misma tecla, 
oprima
  después de ingresar la 
primera letra).
5. Oprima  y luego .
RESOLUTION/
RECEPTION MODE
START/MEMORY
FUNCTION
START/MEMORY
START/MEMORYSTOP
FAX TELJAN-01 10:30
FAX TELJAN-01 10:30
FAX TELJAN-01 10:30TAD
TAD TAD
RESOLUTION/
RECEPTION MODE
A =B =
C =
D =E =F =
G =H =I  =J =K =L =M =
N =O =P =Q =R =S =T =
U =V =W =X =Y =Z =
SPACE =

(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦ø÷ø
¦
¦


						

							102
A
Anti Junk Fax, 79
Audible signals, 93
Auto-dial numbers
Storing, 34, 56
Using, 59
C
Caller ID, 73-77
Caller ID List, 81
Contrast, 54
Copies, 71
Copy cut-off setting, 72
D
Date, setting, 18-19
Daylight Saving Time, 19
Dial mode, 10
Dialing
Automatic, 59
Direct Keypad, 60
Normal, 55
Direct Keypad Dialing, 60
Display messages, 91
Distinctive ring, 78
Document feeder, 52
Document guides, 52
Document restrictions, 52
Document sizes, 51
Document, maximum scanning size, 51
E
ECM (Error Correction Mode), 62
Extension telephone
Using, 67
F
FAX reception mode, 20, 65
Fax reception on TAD failure, 38
Fax Signal Receive, 68
H
Halftone setting, 53
Handset, 9
Handset receiver volume, 22
Housing, cleaning, 86
I
Imaging film, replacing, 12
J
Jams, clearing, 94-95
L
Letters, entering, 17, 57
Line error, 87
Loading paper, 14
Loading the document, 52
M
Memory transmission, 64
Memory, substitute reception to, 70
Message List, 81
Messages
Erasing, 37
Listening to, 36
Listening to remotely, 46
Setting allowed time, 38
N
Normal Dialing, 55
Number of rings in FAX reception mode, 
65
Number of rings in TAD mode, 35
O
OGM only mode, 39
OpenLCR, 23-32
Ordering parts, 96
Outgoing message, 33
Index

(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦ø÷ù
¦
¦


						

							Index
103
Override Ringing, 43
P
Paper jams, clearing, 94-95
Paper size setting, 15
Paper tray extension, 11
Paper, loading, 14
Power cord, 9
Print contrast setting, 15
Print head, cleaning, 84-85
Priority Call, 76
R
Reception mode
FAX mode, 20, 65
TAD mode, 20, 34
TEL mode, 20, 66
Reception Ratio setting, 69
Redialing, 61
Remote code number, 45
Remote operations, 45Resolution, 53
Ringer volume, 22
S
Scanning glass, cleaning, 85
Sender’s name and number, entering, 
16-17
Setup List, 81
Speaker volume, 21
T
TAD reception mode, 20, 34
TEL reception mode, 20, 66
TEL. LINE jack, 10
Telephone line cord, 10
Telephone Number List, 81
Time, setting, 18-19
Toll Saver function, 35
Transaction Report, 82
Setting print condition, 83
Transfer Function, 40

(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦ø÷ú
¦
¦


						

							
(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦ø÷û
¦
¦


						

							
(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦ø÷ü
¦
¦


						

							
(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦ø÷ý
¦
¦


						

							1. Call your fax from a touch-tone telephone, and 
press   #   when the outgoing message begins. 
2. Enter your remote code:                   . 
3. Press   #   . 
4. After listening to your messages, you can either 
hang up to save them, or enter one of the 
commands on the reverse side. 
REMOTE OPERATION CARD 
The card below is provided as a quick guide to remote operation. Cut it out 
and carry it with you when you go out. 
Remote Operation Guide

(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦ø÷þ
¦
¦


						

							REMOTE COMMANDS
FAX RECEPTION MODES 
TAD mode .........................81#
FAX mode .........................82#
TEL mode .........................83#
TRANSFER FUNCTION 
Turn on .............................91#
Turn off .............................92#
New transfer number ........90#
       (Tel. #)       #
Record transfer OGM .......93#
To quickly disconnect........**   
OGM ONLY MODE 
Turn on .............................11# 
Turn off .............................12#  PLAYBACK 
Play messages .................7# 
Move backward/repeat......2#
Skip forward ......................5#
Stop ..................................0#
Play new messages only ..6#
(first stop playback) 
ERASING MESSAGES 
Erase single message ......3# 
Erase all messages ..........33#
RECORDING A MEMO 
Start ..................................*#   
End ...................................0# 
RECORDING A NEW OGM 
Start ..................................4*

(
3
3õ
)
6
6
2
¦
¦

(
.
,
¦ø÷ÿ
¦
¦