Home > Sony > Television > Sony Kdf E42a11e Operating Instructions

Sony Kdf E42a11e Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Sony Kdf E42a11e Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11  GB
    Getting Started3: Connecting an aerial/VCR
    A
    1
    Rear of the TV
    Coaxial cable 
    (not supplied)
    Coaxial cable 
    (supplied)
    IN
    OUT
    R/D/D/D(VARIABLE)
    L/G/S/IYPR/CRPB/CBL/G/
    S/IR/D/
    D/D
    (SmartLink)
    //
    6R     L
    MODEM
    5V  500 mA
    Coaxial cable 
    (not supplied)
    Scart lead 
    (not supplied)
    RF lead 
    (not 
    supplied)
    2-1
    1
    Rear of the TV
    2-3
    VCR
    2-2
    Coaxial cable 
    (supplied)
    B
     
    						
    							12  GB
    1Connect your aerial to the   socket on the 
    rear of the TV.
    If connecting to an aerial only (A)Connect the   socket to the   socket on the rear of 
    the TV with the supplied coaxial cable.
    Go to step 3.
    If connecting to a VCR with an aerial (B)Go to step 2.
    2Connect your VCR.
    1Connect the   socket on the rear of the TV to the 
    input socket on your VCR with the RF lead.
    2Connect the output socket on your VCR to the     
    socket on the rear of the TV with the supplied 
    coaxial cable.
    3Connect the scart socket on your VCR to the  /
    2 scart socket on the rear of the TV with a 
    scart lead.
    Note
    Do not connect the mains lead to your mains socket until 
    all connections are complete.
    3Bundle the cable.
    4: Preventing the TV 
    from toppling over
    Sony strongly recommends using the TV stand SU-
    RG11S (for KDF-E42A11E)/SU-RG11M (for KDF-
    E50A11E) with a support belt designed for your TV.
    5: Switching on the TV
    1Connect the TV to your mains socket (220-
    240V AC, 50Hz).
    2Press 1 on the TV (front side).
    When you switch on the TV for the first time, the 
    Language menu appears on the screen, then go to “6: 
    Selecting the language and country/region” on 
    page 12. 
    When the TV is in standby mode (the 1 (standby) 
    indicator on the front of the TV is red), press TV +/1 
    on the remote to switch on the TV, then go to page 13.
    6: Selecting the language 
    and country/region
    When you switch on the TV for the first time, the 
    Language menu appears on the screen.
    1Press m/M/
    						
    							13  GB
    Getting Started7: Auto-tuning the TV
    After selecting the language and country/region, a 
    message confirming the TV start auto-tuning appears 
    on the screen.
    You must tune the TV to receive channels (TV 
    broadcasts). Do the following to search and store all 
    available channels.
    1Press OK to select “Yes”.
    The TV starts searching for all available digital 
    channels followed by all available analogue 
    channels. This may take some time, please be 
    patient and do not press any buttons on the TV or 
    remote.
    Once all available digital and analogue channels 
    have been stored, the TV returns to normal 
    operation, displaying the digital channel stored on 
    channel number 1. If no digital channels are 
    found, the analogue channel stored on channel 1 is 
    displayed.
    When a message appears for you to confirm the 
    aerial connections
    No digital or analogue channels are found. Check 
    all the aerial connections and press OK twice to 
    start auto-tuning again.
    2The Programme Sorting menu appears on 
    the screen.
    Note
    If some digital channel is found, this step will 
    not appear
    3To change the order in which the channels 
    are stored on the TV. See page 30.
    4Press MENU to exit.
    The TV has now tuned in all the available 
    channels.
    Tip functions are available only for   countries (page 2).
    4 1
    Do  you  want  to  start
    automatic  tuning ?
    Ye sNo
    m
    Number  of  Services  found14
    Searching.         40%
    Digital auto-tune display 
    m
    Auto  Tuning
    Programmes found:
    Searching...
    Analogue auto-tune display
     
    						
    							14  GB
    Watching TV
    1Press 1 on the TV (Front side) to switch on 
    the TV.
    When the TV is in standby mode (the 1 (standby) 
    indicator on the front of the TV is red), press TV 
    "/1 on the remote to switch on the TV.
    2Press DIGITAL to switch to digital mode      
    or  ANALOG to switch to analogue mode.
    The channels available vary depending on the 
    mode.
    3Press the number buttons or PROG
     +/- to select a TV channel.
    To select channel numbers 10 and above using the 
    number buttons, enter the second and third digits 
    within two seconds.
    To select a digital channel using the Digital 
    Electronic Programme Guide (EPG), see page 16.
    In digital mode 
    An information banner appears briefly. The 
    following icons may be indicated on the banner. 
    Additional operations
    Watching TV
    3 1
    2
    32
    PU SH  O PENWEGA GATETV /V ID E OCANNEL VO L U M EPOWERTIM E R LA M PPOWER/STANDBY
    1
    :Radio service
    : Scrambled/Subscription service
    : Multiple audio languages available
    : Subtitles available
    : Subtitles available for the hearing impaired
    : Recommended minimum age for current 
    programme (from 4 to 18 years)
    : Parental Lock
    : Current programme is being recorded
    To Do this
    Turn off the TV 
    temporarily 
    (Standby mode)Press TV "/1.
    Turn on the TV   
    from Standby     
    mode without soundPress %. Press 2 +/- to set the 
    volume level 
    Turn off the TV 
    completelyPress 1 on the front side of the 
    TV.
    Adjust the volume Press 2 + (increase)
     /- (decrease).
    Mute the sound Press %. Press again to restore.
    Switch to digital 
    modePress DIGITAL
    Hide interactive 
    prompts from the 
    screen (in digital 
    mode only)
    Switch to analogue 
    modePress ANALOG.
    Tip 
     functions are available only for   countries (page 2).
     
    						
    							15  GB
    Watching TV
    To access Text
    Press /. Each time you press /, the display changes 
    cyclically as follows:
    Text t Text over the TV picture (mix mode) t No 
    Text (exit the Text service)
    To select a page, press the number buttons or PROG 
    +/-.
    To hold a page, press  / .
    To reveal hidden information, press  / .
    Return to normal TV mode, press ANALOG.
    Tips
    • Ensure that the TV is receiving a good signal, or some text 
    errors may occur.
    • Most TV channels broadcast a Text service. For 
    information on the use of the service, select the index page 
    (usually page 100).
    When four coloured items appear at the bottom of the Text 
    page, Fastext is available. Fastext allows you to access pages 
    quickly and easily. Press the corresponding coloured button 
    to access the page.
    Picture Freeze
    Freezes the TV picture (e.g. to make a note of a 
    telephone number or recipe).
    1Press  on the remote control.
    2Press  again to return to normal TV mode.
    To change the screen mode manually to 
    suit the broadcast
    Press   repeatedly to select Wide, Smart, 4:3, 14:9, 
    or Zoom.
    Displays wide screen (16:9) broadcasts in the correct 
    proportions.
    Displays conventional 4:3 broadcasts with an 
    imitation wide screen effect. The 4:3 picture is 
    stretched to fill the screen.
    Displays conventional 4:3 broadcasts (e.g., non-wide 
    screen TV) in the correct proportions.
    As a result, black border areas are visible on the 
    screen.
    Displays 14:9 broadcasts in the correct proportions. 
    As a result, black border areas are visible on the 
    screen.
    Displays cinemascopic (letter box format) broadcasts 
    in the correct proportions.
    * Parts of the top and bottom of the picture may be cut off.
    Tips
    • Alternatively, you can set “Auto Format” to “On”. If the 
    broadcaster sends format information the TV will 
    automatically select the best mode to suit the broadcast 
    (page 25).
    • You can adjust the position of the picture when selecting 
    Smart, 14:9, or Zoom. Press m/M to move up or down 
    (e.g., to read subtitles).
    Return to the 
    previous channel 
    watched (for more 
    than five seconds)
    Access the 
    Programme index 
    table (in analogue 
    mode only)
    To access the Input 
    signal index tablePress .
    Press OK. To select a channel, 
    press m/M, then press OK.
    Press OK. Press 
    , to select
    the desired input signal, press   
    m/M, then press OK.
    To Do this
    Wide
    Smart*
    4:3
    14:9*
    Zoom*
     
    						
    							16  GB
    Checking the Digital Electronic Programme Guide 
    (EPG) 
    001
    002
    003
    006
    007
    008
    009
    014
    024
    029
    030
    040BBC ONE Wales
    BBC 2W
    ITV 1 Wales
    ITV 2
    BBC THREE
    Channel 4
    Teletext
    E4
    price-drop.tv
    UKTV FOOD
    CBBC Channel
    BBC NEWS 24Thu 27 May All Categories
    Select: Action list: +/- 1 day on/off Thu 27 May 10:31
    10:30 11:00City Hospital   Houses Be…   Bargain Hu…   Cash in the…
    The…   The…   Sch…   Sch…   The Daily Politics
    This M…   i   i   This Morning                      i   This Morning
    Sally Jessy Rap…   Judge Judy  Judge J…   Judge J…
    This is BBC THREE                                         This is BB…
    Self…   The Vi…   Teen Big B…   From Th…   News at N…
    No Event Information
    E4 Preview
    No Event Information
    Food and D…   Ready Stea…   No Event Information
    Mat…   Mat…   K…   K…   K…   Look…   Look…   Zig Zag
    BBC News        BBC News                                BBC News
    Next Previous 30 min view Category
    11:3012:00
    OK
    1In digital mode, press   to display the 
    Digital Electronic Programme Guide 
    (EPG).
    2Perform the desired operation in following 
    table.
    Digital Electronic Programme 
    Guide (EPG)
    To Do this
    Turn off the EPG Press  .
    Move through the EPG Press m/M/
    						
    							17  GB
    Watching TV
    Set a programme to be displayed 
    automatically on the screen when it starts 
    – Reminder1Press m/M/
    						
    							18  GB
    Using the Favourite list 
    Tip 
     functions are available only for   countries (page 2) To Do this
    Create your Favourite list for the first time A message appears asking if you want to add channels to the Favourite list 
    when you press   for the first time.
    1Press OK to select “Yes”.
    2Press m/M to select the channel you want to add, then press 
    OK.
    If there are more than five channels in the list, press the green button for 
    the next five channels or press the red button for the previous five 
    channels. If you know the channel number, you can use the number 
    buttons to directly select a channel.
    3Press OK.
    Channels that are stored in the Favourite list are indicated by a   
    symbol.
    Turn off the Favourite list Press  .
    Move through in the Favourite list Press m/M.
    Display the previous or next five channels Press the red (previous) or green (next) button.
    See brief details on current programmes Press   while selecting a channel. Press again to cancel.
    Watch a channel Press OK while selecting a channel.
    Add or remove channels in the Favourite 
    list
    1Press the blue button.
    Channels that are stored in the Favourite list are indicated by a   
    symbol.
    2Press m/M to select the channel you want to add or remove.
    If there are more than five channels in the list, press the green button for 
    the next five channels or press the red button for the previous five 
    channels. If you know the channel number, you can use the number 
    buttons to directly select a channel.
    3Press OK.
    4Press the blue button to return to the Favourite list.
    Remove all channels from the Favourite 
    list1Press the blue button.
    2Press the yellow button.
    A display appears to confirm that you want to delete all channels from the 
    Favourite list.
    3Press < to select “Yes”, then press OK to confirm.
    BBC NEWS 24Fri 15 Apr 16:35 
    001   BBC ONE
    002   BBC TWO
    003   ITV 1 
    004   Channel 4
    005   Channel 5 Evening  News
    Up Down Set up
    Select: Set: Back:OK
    1In digital mode, press   to display the 
    Favourite list.
    A message appears asking if you want to add 
    channels to the Favourite list when the Favourite 
    list is blank.
    2Perform the desired operation in following 
    table.Favourite list
     
    						
    							19  GB
    Using the Menu
    Viewing pictures from 
    connected equipment
    Switch on the connected equipment, then 
    perform one of the following operation.
    For equipment connected to the scart sockets using a 
    fully-wired 21-pin scart lead
    Start playback on the connected equipment.
    The picture from the connected equipment appears on 
    the screen.
    For an auto-tuned VCR page 11
    Press PROG +/-, or the number buttons, to select the 
    video channel. You can also press  /  repeatedly 
    until the correct input symbol (see below) appears on 
    the screen. 
    For other connected equipment
    Press  /  repeatedly until the correct input 
    symbol (see below) appears on the screen or press OK 
    to 
    access the Input signal index table. Press , to select 
    an input source, press m/M, then press OK.
    Additional operations
    Navigating through 
    menus
    1Press MENU to display the menu.
    2Press M/m to select a menu icon, press ,.
    3Press M/m/
    						
    							20  GB
    Overview of the menus
    The following options are available in each menu. For 
    details on navigating through menus, see (page 19).
    Also, see page in parentheses for details of each menu.
    1Picture Adjustment
    Picture Mode (21)   
    Contrast/Brightness/Colour/Hue/
    Sharpness (21) 
    Colour Tone (21)
    Reset (22)
    Noise Reduction (22)
    Iris (22)
     
    2Sound Adjustment
    Sound Effect (23)
    Treble/Bass/Balance (23)
    Reset (23)
    Dual Sound (24)
    Auto Volume (24)
    3Screen
    Auto Format (25)
    Screen Format (25)
    RGB Center (25)
    4Features
    AV2 Output (26)
    TV Speakers (26)
    PC Adjustment (27)
    Select: Set: End:OKMENU
    Picture Mode
    Contrast
    Brightness
    Colour
    Hue
    Sharpness
    Colour   Tone
    Reset
    Noise Reduction
    IrisCustom
    Max
    50
    50
    0
    15
    War m
    Auto
    High Picture  Adjustment1
    2
    3
    4
    5
    6
    5Timer
    Sleep Timer (28)
    Clock Set (28)
    Timer (28)
    6Set Up
    Auto Start Up (29)
    Language (29)
    Country (29)
    Auto Tuning (30)
    Programme Sorting (30)
    Programme Labels (31)
    AV Preset (31)
    – Label/Skip
    Manual Programme Preset (31)
    – Programme/System/Channel/Label/AFT/
    Audio Filter/Skip/Decoder/ATT/Confirm
    Digital Set Up (34)
    – Digital Tuning/Digital Set-up
     
    						
    All Sony manuals Comments (0)

    Related Manuals for Sony Kdf E42a11e Operating Instructions