Home > Canon > Printer > Canon Imageprograf Ipf815 Mfp M40 User Guide

Canon Imageprograf Ipf815 Mfp M40 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Imageprograf Ipf815 Mfp M40 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 960
    							Print Entire Sheet (Excel)
    For resizing the entire sheet to fit the roll width. Choose this option to enlarge the currently displayed sheet before printing.
    1. Start Microsoft Excel .
    2. If Start imagePROGRAF Print Plug-In  is displayed, click it.3.
    Click  Print from the imagePROGRAF Print Plug-In  toolbar/ribbon.Important
    • When more  than  one  worksheet  is  selected,  the  Printing  Wizard  cannot  be  run.  Select  only  one
    worksheet and click  Print again.
    If a print area is set, a confirmation message dialog box will appear.
    To print the entire sheet, cancel the setting of the print area. The 
    Printing Wizard dialog box is displayed. Windows Software 
    > Print Plug-In for Office >
    iPF815
    Print Entire Sheet (Excel) 4
    345
     
    						
    							4.
    Click  Print Entire Sheet.
    A message will appear informing you that analysis is in progress. The Layout menu will appear automatically.
    Note
    • If data  analysis  requires  time,  a  message  dialog  will  appear.  If  you  select  No,  you  will  return  to  the
    application.
    5. Select  Roll Paper Width that is set in the printer.
    Windows Software 
    > Print Plug-In for Office >
    Print Entire Sheet (Excel)
    iPF8154
    346
     
    						
    							6.
    Select image size.
    7. Select layout.
    8. To configure  Binding, click the  Binding Settings button.
    Refer to  Configuring Binding (Excel) →P.351
     for details on the procedure for configuring  Binding.
    9. Select Next. 10.
    Select Media Type .
    11. Enter Copies. Note
    • When Print in Draft mode is selected, printing is fast but the print quality is poor.
    • Press 
    the Print  Preview   button  to  display  the  preview  screen.  You  can  check  and  make  changes  to
    the layout in the preview screen.
    • When you print to the edge of the roll width, the maximum print length is 18.0m.
    12. If the upper and lower margins are too wide, check  No Spaces at Top or Bottom (Conserve Paper).
    The upper and lower margins can be checked in  Print Preview.
    13. Press Print to start printing. Important
    • If divided into plural pages, try reducing the data size or the range you select.
    • You cannot run Print or Print Preview  if you select it for a worksheet with no data displayed.Windows Software 
    > Print Plug-In for Office >
    iPF815
    Print Entire Sheet (Excel) 4
    347
     
    						
    							Print Selected Area (Excel)
    For resizing the selected range of cells to fit the roll width. Choose this option to enlarge a particular part of the sheet before
    printing.
    1. Start  Microsoft Excel .
    2. If Start imagePROGRAF Print Plug-In  is displayed, click it.3.
    Click Print  from the imagePROGRAF Print Plug-In  toolbar/ribbon.Important
    • When more  than  one  worksheet  is  selected,  the  Printing  Wizard  cannot  be  run.  Select  only  one
    worksheet and click  Print again.
    If a print area is set, a confirmation message dialog box will appear.
    To print the selected area, cancel the setting of the print area. The 
    Printing Wizard dialog box is displayed. Windows Software 
    > Print Plug-In for Office >
    Print Selected Area (Excel)
    iPF8154
    348
     
    						
    							4.
    Click  Print Selected Area . Important
    • If only one cell is selected,  Print Selected Area cannot be selected.
    A message will appear informing you that analysis is in progress. The Layout menu will appear automatically.
    Important
    • If the range selected in  Excel 2007/2010 is too large, it will not be possible to analyze the data. Select
    a smaller range and then run the analysis. Windows Software 
    > Print Plug-In for Office >
    iPF815
    Print Selected Area (Excel) 4
    349
     
    						
    							Note
    • If data  analysis  requires  time,  a  message  dialog  will  appear.  If  you  select  No,  you  will  return  to  the
    application.
    5. Select  Roll Paper Width that is set in the printer.
    6. Select image size.
    7. Select layout.
    8. To configure Binding, click the  Binding Settings button.
    Refer to Configuring Binding (Excel) →P.351
     for details on the procedure for configuring  Binding.
    9. Select Next. 10.
    Select Media Type.
    11. Enter Copies. Note
    • When Print in Draft mode is selected, printing is fast but the print quality is poor.
    • Press 
    
    the Print  Preview   button  to  display  the  preview  screen.  You  can  check  and  make  changes  to
    the layout in the preview screen.
    • When you print to the edge of the roll width, the maximum print length is 18.0m.
    12. If the upper and lower margins are too wide, check  No Spaces at Top or Bottom (Conserve Paper).
    The upper and lower margins can be checked in  Print Preview.
    Windows Software 
    > Print Plug-In for Office >
    Print Selected Area (Excel)
    iPF8154
    350
     
    						
    							13.
    Press Print to start printing. Important
    • If divided into plural pages, try reducing the data size or the range you select.
    • You cannot run Print or Print Preview  if you select it for a worksheet with no data displayed.Configuring Binding (Excel)
    You can configure Binding margins for binding printouts.
    1. Configure the settings up to  Layout Selection in the Layout screen in  Print Entire Sheet or Print Selected Area .
    Refer 
    to Print  Entire  Sheet  (Excel) →P.345
     
    and  Print  Selected  Area  (Excel) →P.348
      for  the  configuration
    methods.
    2. Click the  Binding Settings button. Important
    • You cannot click the  Binding Settings button in the following situations.
    • When the Image Size  is set to 100%
    • When a graph is selected
    • When page breaks have been set
    • When a sheet or cell is protected
    Open the Binding Settings dialog box. 3.
    If the  Binding checkbox is not checked, select it to turn binding on.
    4. Select  Binding Edge.
    5. Select  Binding Margin. Windows Software 
    > Print Plug-In for Office >
    iPF815
    Configuring Binding (Excel) 4
    351
     
    						
    							6.
    Click the  OK button.
    Return to the  Layout screen. Check that the 
    Binding settings are applied in the preview screen.
    7. Configure the settings in the  Printing Wizard dialog box.Configuring Special Settings
    You can configure  Special Settings from the imagePROGRAF Print Plug-In  toolbar.
    1. Click  imagePROGRAF in the toolbar, and select  Special Settings.2.
    Turn the checkbox for the item you want to change on or off. Item
    Details
    Show progress indicator during plug-in
    startup When this setting is off, hides the progress indicator that appears while
    the plug-in is starting up.
    Center sheets and print areas When this setting is off, printing is performed without changing the
    position. When this setting is on, printing is performed with the top,
    bottom, left, and right margins layed out equally. When this setting is
    off, printing is performed without changing the position. Windows Software > Print Plug-In for Office >
    Configuring Special Settings
    iPF8154
    352
     
    						
    							Item
    Details
    Center sheets and print areas This function is only valid in Microsoft Excel.
    Ensure image quality when creating page
    sizes When this setting is on, documents are created at the maximum size.
    This reduces the enlargement ratio during actual printing, which mini-
    mizes degradation of the quality of photos, etc.
    This function is only valid in [  Microsoft PowerPoint.
    Correct the print area when analyzing For data that cannot be processed with usual data analysis, the print
    area is corrected and then the data is processed. When data analysis
    fails, you may be able to print by turning on this checkbox.
    This function is only valid in  Microsoft Excel. 3.
    Click  OK to close the  Special Settings dialog box. Windows Software > Print Plug-In for Office >
    iPF815
    Configuring Special Settings 4
    353
     
    						
    							HDI Driver
    The Features of HDI Driver ............................................................................................................................. 354
    Operating Environment ................................................................................................................................... 354
    Installation Procedure
    ...................................................................................................................................... 355
    Installing with the Canon Installer ............................................................................................................... 355
    Installing with the Add-A-Plotter Wizard ...................................................................................................... 362
     
    Opening the Plotter Configuration Dialog Box ................................................................................................. 367
    Opening from the AutoCAD File Menu ........................................................................................................ 368
    Opening from the Start Menu ...................................................................................................................... 369
    Plotter Configuration Editor Dialog Box ........................................................................................................... 371
    Media Source and Media Size Settings ...................................................................................................... 372
    Graphics Settings ........................................................................................................................................ 373
    Opening the Custom Properties Dialog Box .................................................................................................... 376
    Custom Properties dialog box ......................................................................................................................... 378
    Paper Detailed Settings ................................................................................................................................... 380
    Output Method Dialog Box .............................................................................................................................. 382
    Color Compatibility Dialog Box ........................................................................................................................ 382
     
    Printing ............................................................................................................................................................ 383The Features of HDI Driver
    The main features of HDI Driver are as follows. •A 
    
    special HDI (Heidi Device Interface) compatible printer driver for the Autodesk, Inc. software applications for Auto-
    CAD and AutoCAD LT architecture (hereafter referred to together as "AutoCAD").
    • You  can  set  up  the  print  job  with  the  most  appropriate  settings  for  the  media  and  print  clear,  sharp  printouts  of  plans
    and diagrams created with AutoCAD. Operating Environment
    The HDI driver operating environment is as follows. •Compatible Operating System
    Windows XP, Windows Vista, Windows 7
    • Compatible AutoCAD Version
    AutoCAD 2005, AutoCAD LT2005, AutoCAD 2006, AutoCAD LT2006,
    AutoCAD 
    
    2007,  AutoCAD  LT2007,  DWG  TrueView  2007,  AutoCAD  2008,  AutoCAD  LT2008,  DWG  TrueView
    2008,
    AutoCAD  2009,  AutoCAD  LT2009,  DWG  TrueView  2009,  AutoCAD  2010,  AutoCAD  LT2010,  DWG  TrueView
    2010,
    AutoCAD 2011, AutoCAD LT2011, DWG TrueView 2011,
    AutoCAD  2008(x64),  DWG  TrueView  2008(x64),  AutoCAD  2009(x64),  AutoCAD  LT2009(x64),  DWG  TrueView 2009(x64),
    AutoCAD 2010(x64), AutoCAD LT2010(x64), DWG TrueView 2010(x64)
    AutoCAD 2011(x64), AutoCAD LT2011(x64), DWG TrueView 2011(x64) Note
    • The supported OS version differs for each version of AutoCAD. Check with Autodesk for details.
    Windows Software 
    > HDI Driver >
    The Features of HDI Driver
    iPF8154
    354
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Imageprograf Ipf815 Mfp M40 User Guide