Home > Canon > Printer > Canon printer PIXMA MX492 User Manual

Canon printer PIXMA MX492 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MX492 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    of 1004
    							Safety Guide
    Safety Precautions
    Regulatory and Safety Information
    							Safety PrecautionsChoosing a location•
    Do not install the machine in a location that is unstable or subject to excessive vibration.
    Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or
    close to a heating source.
    To avoid the risk of fire or electric shocks, use the machine under the operating environment specified
    in the On-screen Manual.
    Do not place the machine on a thick rug or carpet.
    Do not place the machine with its back attached to the wall.
    Power supply
    Ensure that the area around the power outlet is kept clear at all times so you can easily unplug the
    power cord if necessary.
    Never remove the plug by pulling on the cord.
    Pulling the cord may damage the power cord, leading to possible fire or electrical shock.
    Do not use an extension lead/cord.
    Working around the machine
    Never put your hands or fingers in the machine while it is printing.
    When moving the machine, carry the machine at both ends. In case the machine weighs more than 14 kg, it is recommended to have two people lifting the machine. Accidental dropping of the machine
    causes injury. For the machine's weight, refer to the On-screen Manual.
    Do not place any object on the machine. Especially do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents (alcohol, thinners, etc.) on top of the machine.
    Do not transport or use the machine on a slant, vertically or upside-down, as the ink may leak and
    damage the machine.
    Working around the machine (For the multifunction printer)
    When loading a thick book on the Platen Glass, do not press hard on the Document Cover. The Platen Glass may break and cause injury.
    Print Heads/ink tanks and FINE Cartridges
    Keep ink tanks out of the reach of children. In case ink* is accidentally licked or swallowed, rinse out
    mouth or give one or two glasses of water to drink. If irritation or discomfort occurs, obtain medical
    advice immediately.
    * Clear Ink contains nitrate salts (For models containing Clear Ink).
    In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with skin, wash with soap and water immediately. If irritation to eyes or skin persists, obtain medical advice
    Never touch the electrical contacts on a Print Head or FINE Cartridges after printing.
    The metal parts may be very hot and could cause burns.
    Do not throw ink tanks and FINE Cartridges into fire.
    Do not attempt to disassemble or modify the Print Head, ink tanks, and FINE Cartridges.
    							Regulatory and Safety InformationFor models containing lithium battery•
    Dispose of used batteries according to the local regulations.
    Risk of explosion if battery is replaced by an incorrect type.
    When using your telephone equipment, basic safety precautions should always be followed to reduce the
    risk of fire, electric shock and injury to persons, including the following:
    Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
    Avoid using this product during an electrical storm. There may be a remote risk of electric shock fromlightning.
    Do not use this product to report a gas leak in the vicinity of the leak.
    "CAUTION - To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord."
    IMPORTANTES MESURES DE SÉCURITÉ CONSERVER CES INSTRUCTIONSCertaines mesures de sécurité doivent être prises pendant l'utilisation de matérial téléphonique afin deréduire les risques d'incendie, de choc électrique et de blessures.
    En voice quelquesunes :
    Ne pas utiliser l'appareil près de l'eau, p.ex., près d'une baignoire, d'un lavabo, d'un évier de cuisine, d'un bac à laver, dans un sous-sol humide ou près d'une piscine.
    Éviter d'utiliser l'appareil pendant un orage électrique. Ceci peut présenter un risque de chocélectrique causé par la foudre.
    Ne pas utiliser l'appareil pour signaler une fuite de gaz s'il est situé près de la fuite.
    "ATTENTION - Pour réduire les risques d'incendie, utiliser uniquement des conducteurs de
    télécommunications 26 AWG au de section supérleure."
    Users in the U.S.A. FCC Notice (U.S.A. Only)
    For 120V, 60Hz model
    Model Number: K10415 (Contains FCC Approved WLAN Module K30357)
    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
    (1) This device may not cause harmful interference, and (2) this device must accept any interference
    received, including interference that may cause undesired operation.
    Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
    harmful interference in a residential installation. This equipment generates, uses and can radiate radio
    frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
    interference to radio communications.
    However, there is no guarantee that interference will not occur in a particular installation. If this equipment
    does cause harmful interference to radio or television reception, which can be determined by turning the
    							equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:•
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and receiver.
    Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.
    Consult the dealer or an experienced radio/TV technician for help.
    Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
    Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.
    FCC ID:AZDK30357
    Changes or modifications not expressly approved by the party responsible for compliance could void the
    user's authority to operate equipment.
    This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
    The equipment complies with FCC radiation exposure limits for at uncontrolled equipment. This
    equipment should be installed and operated with minimum distance at least 20cm between the radiator and persons body (excluding extremities: hands, wrists, feet and ankles) and must not be colocated or
    operated with any other antenna or transmitter.
    Canon U.S.A., Inc.
    One Canon Park
    Melville, New York 11747
    Pre-Installation RequirementsOrder Information
    When ordering service from the telephone company for this equipment, the following may be required.
    Universal Service Order Code (USOC): RJ11C
    The Facility Interface Code (FIC): 02LS2
    Service Order Code (SOC): 9.0F
    Connection of the Equipment
    This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
    A label on this equipment contains, among other information, a product identifier in the format
    US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
    The REN is used to determine the number of devices that may be connected to a telephone line.
    Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call.
    In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of
    devices that may be connected to a line, as determined by the total RENs, contact the local telephone
    company. The REN for this product is part of the product identifier that has the format
    US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a
    REN of 0.3).
    A plug and jack used to connect this equipment to the premises wiring and telephone network must
    comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
    							telephone cord and modular plug is provided with this product. It is designed to be connected to acompatible modular jack that is also compliant. See installation instructions for details.
    Connection to party lines is subjected to state tariffs. Contact the state public utility commission, public
    service commission or corporation commission for information.
    If your home has specially wired alarm equipment connected to the telephone line, ensure the installation
    of this equipment does not disable your alarm equipment. If you have questions about what will disable
    alarm equipment, consult your telephone company or a qualified installer.
    In Case of Equipment Malfunction Should any malfunction occur which cannot be corrected by the procedures described in the OnlineManual, disconnect the equipment from the telephone line cable, turn off the power and disconnect the
    power cord. The telephone line cable should not be reconnected or the main power switch turned ON until
    the problem is completely resolved. Users should contact their local authorized Canon Facsimile Service
    Dealer for the servicing of equipment.
    Information regarding Authorized Service Facility locations can be obtained by calling the Canon
    Customer Center.
    Rights of the Telephone Company
    If this equipment causes harm to the telephone network, the telephone company may temporarily disconnect service. The telephone company also retains the right to make changes in facilities and
    services that may affect the operation of this equipment. When such changes are necessary, the
    telephone company is required to give adequate prior notice to the user. However, if advance notice is not
    possible, the telephone company will notify the customer as soon as possible. Also, the customer will be
    advised of his/her right to file a compliant with the FCC if he/she believes it is necessary.
    The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or
    other electronic device to send any message via a telephone FAX machine unless such message clearly
    contains in a margin at the top or bottom of each transmitted page, or on the first page of the
    transmission, the date and time it is sent and an identification of the business or other entity, or other
    individual sending the message and the telephone number of the sending machine or such business, other entity, or individual.
    In order to program this information into your FAX machine, you should complete the procedure to register
    your name, unit's telephone number, time, and date. Refer to the Online Manual.
    Users in Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
    following two conditions:
    (1) this device may not cause interference, and (2) this device must accept any interference, including
    interference that may cause undesired operation of the device.
    This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and
    meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and
    operated keeping the radiator at least 20cm or more away from person's body (excluding extremities: hands, wrists, feet and ankles).
    							Pre-Installation Requirements
    This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be
    connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.
    Pour les usagers résidant au Canada
    Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
    de licence. L'exploitation est autorisée aux deux conditions suivantes :
    (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
    radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
    Cet équipement est conforme aux limites d'exposition aux rayonnements énoncées pour un
    environnement non contrôlé et respecte les règles d'exposition aux fréquences radioélectriques (RF)
    CNR-102 de l'IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus
    entre le dispositif rayonnant et le corps (à l'exception des extrémités : mains, poignets, pieds et chevilles).
    Conditions de pré-installation Avis
    Le présent matériel est conforme aux spécifications techniques applicables d'Industrie Canada.
    L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison d'une interface peut consister en une
    combinaison quelconque de dispositifs, à la seule condition que la somme d'indices d'équivalence de la
    sonnerie de tous les dispositifs n'excède pas 5.
    Users in New Zealand The grant of a Telepermit for any item of terminal equipment indicates only that Spark has accepted that
    the item complies with minimum conditions for connection to its network. It indicates no endorsement of
    the product by Spark, nor does it provide any sort of warranty. Above all, it provides no assurance that
    any item will work correctly in all respects with another item of Telepermitted equipment of a different
    make or model, nor does it imply that any product is compatible with all of Spark's network services.
    This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for
    which it is designed. Spark will accept no responsibility should difficulties arise in such circumstances.
    This condition typically applies to 56 kbit/s modems and V34 facsimile machines.
    Please note when you connect an extension phone to this device, if you use an extension phone which
    has features such as "last number redial", redial memory numbers may be lost.
    The automatic calling functions of this equipment must not be used to a nuisance to other Spark
    Telepermitted equipment only may be connected to the telephone port. The telephone port is not
    specifically designed for 3-wire connected equipment. 3-wire connected equipment might not respond to
    incoming ringing when attached to this port.
    Users in Jordan This printer contains WLAN Module approved by TRC/LPD/2013/130
    							Name of WLAN Module : K30357
    Only for European Union and EEA (Norway, Iceland and Liechtenstein)
    This symbol indicates that this product is not to be disposed of with your household waste, according to
    the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product
    or to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper
    handling of this type of waste could have a possible negative impact on the environment and human
    health due to potentially hazardous substances that are generally associated with EEE. At the same time,
    your cooperation in the correct disposal of this product will contribute to the effective usage of natural
    resources. For more information about where you can drop off your waste equipment for recycling, please
    contact your local city office, waste authority, approved WEEE scheme or your household waste disposal
    service. For more information regarding return and recycling of WEEE products, please visit www.canon-
    Korisnici u Srbiji
    Ovaj simbol označava da ovaj proizvod ne sme da se odlaže sa ostalim kućnim otpadom, u skladu sa
    WEEE Direktivom (2012/19/EU) i nacionalnim zakonima. Ovaj proizvod treba predati određenom centru
    za prikupljanje, npr. na osnovi "jedan-za-jedan" kada kupujete sličan novi proizvod, ili ovlašćenom centru
    za prikupljanje za reciklažu istrošene električne i elektronske opreme (EEE). Nepravilno rukovanje ovom
    vrstom otpada može da ima moguće negativne posledice po životnu sredinu i ljudsko zdravlje usled
    potencijalno opasnih materijala koji se uglavnom vezuju za EEE. U isto vreme, vaša saradnja na ispravnom odlaganju ovog proizvoda će doprineti efikasnom korišćenju prirodnih resursa. Za više
    informacija o tome gde možete da predate vašu staru opremu radi recikliranje, vas molimo, da
    kontaktirate lokalne gradske vlasti, komunalne službe, odobreni plan reciklaže ili Gradsku čistoću. Za više
    informacija o vraćanju i recikliranju WEEE proizvoda, posetite stranicu www.canon-europe.com/weee.
    Environmental Information Reducing your environmental impact while saving money
    Power Consumption and Activation Time
    The amount of electricity a device consumes depends on the way the device is used. This product is designed and set in a way to allow you to reduce your electricity costs. After the last print it switches toReady Mode. In this mode it can print again immediately if required. If the product is not used for a time,
    the device switches to its Power Save Mode. The devices consume less power (Watt) in these modes.
    If you wish to set a longer Activation Time or would like to completely deactivate the Power Save Mode,
    please consider that this device may then only switch to a lower energy level after a longer period of
    time or not at all.
    Canon does not recommend extending the Activation Times from the optimum ones set as default.
    							Energy Star®
    The Energy Star ®
     programme is a voluntary scheme to promote the development and purchase of
    energy efficient models, which help to minimise environmental impact.
    Products which meet the stringent requirements of the Energy Star ®
     programme for both environmental
    benefits and the amount of energy consumption will carry the Energy Star ®
     logo accordingly.
    Paper types
    This product can be used to print on both recycled and virgin paper (certified to an environmental stewardship scheme), which complies with EN12281 or a similar quality standard. In addition it can
    support printing on media down to a weight of 64g/m 2
    , lighter paper means less resources used and a
    lower environmental footprint for your printing needs.
    RMC Regulatory Model Code (RMC) is for identification and proof that the product complies with theregulations. Please note that RMC is different from the marketing model number of the product.
    							Main Components and Basic Operations
    Main Components
    About the Power Supply of the Machine
    LCD and Operation Panel
    Entering Numbers, Letters, and Symbols
    							Main Components
    Front View
    Rear View
    Inside View
    Operation Panel
    All Canon manuals Comments (1)

    Related Manuals for Canon printer PIXMA MX492 User Manual