Home > Canon > Printer > Canon printer PIXMA MX492 User Manual

Canon printer PIXMA MX492 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MX492 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1004
    							Authentication Type Confirmation Screen
    Note
    •
    This screen is not available depending on the printer you are using.
    Type of authentication used for client authentication is displayed.
    1.
    Authentication Type Type of authentication used for client authentication is displayed.PSK This machine supports the  PSK authentication method.
    This authentication type  PSK uses a passphrase.
    261 
    						
    							PSK:Passphrase and Dynamic Encryption Setup Screen
    Note
    •
    This screen is not available depending on the printer you are using.
    Enter the passphrase and select the dynamic encryption method.
    1.
    Passphrase:
    Enter the passphrase set to the wireless router. The passphrase should be a string of 8 to 63
    alphanumeric characters or a 64-digit hexadecimal value.
    If you do not know the wireless router passphrase, refer to the instruction manual provided with the
    wireless router or contact its manufacturer.
    2.
    Dynamic Encryption Type
    The dynamic encryption method is selected from either TKIP (basic encryption) or AES (secure
    encryption) automatically.
    262 
    						
    							Setup Information Confirmation Screen
    Note
    •
    This screen is not available depending on the printer you are using.
    Displays the settings used for client authentication.
    Confirm the settings and click  Finish.
    263 
    						
    							Wired LAN Sheet
    Note
    •
    This screen is not available depending on the printer you are using.
    Allows you to set the printer with wired LAN connection.
    To display the  Wired LAN sheet, click the  Wired LAN tab on the Configuration  screen.
    1.
    TCP/IP Setup:
    Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your network
    environment.
    Get IP address automatically Select this option to use an IP address automatically assigned by a DHCP server. DHCP server
    functionality must be enabled on your router.
    Use next IP address Select this option if no DHCP server functionality is available in your setup where you use theprinter, or you want to use a particular IP address or a fixed IP address.
    264 
    						
    							Admin Password SheetSets a password for the printer to allow specific people to perform setup and configurations operation.
    To display the  Admin Password  sheet, click the Admin Password  tab on the Configuration  screen.1.
    Use admin password
    Sets an administrator password with privileges to set up and change detailed options. To use this feature, select this check box and enter a password.
    2.
    Password:
    Enter the password to set.
    3.
    Password Confirmation:
    Enter the password again for confirmation.
    Important
    •
    If you forget the administrator password you specified, initialize the printer to return the password to the default setting.
    265 
    						
    							Network Information ScreenDisplays the network information that is set for the printers and the computers.
    To display the  Network Information  screen, select Network Information  from the View menu.1.
    OK
    Returns to the  Canon IJ Network Tool  screen.
    2.
    Copy All Information
    All network information displayed is copied to the clipboard.
    266 
    						
    							Access Control Sheet
    Note
    •
    This screen is not available depending on the printer you are using.
    You can register the MAC addresses or the IP addresses of computers or network devices to allow access.
    To display the  Access Control  sheet, click the Access Control  tab on the Configuration  screen.
    1.
    Printer Access Control Type:
    Select the type of access control with which to limit access of computers or network devices to the
    printer over a network.
    The setting items may differ depending on the choice of access control methods.
    When Selecting MAC address
    When Selecting IP address
    When Selecting MAC address
    The accessible computers or network devices are specified by their MAC addresses. Computers or
    network devices whose MAC addresses appear on the list are allowed access.
    267 
    						
    							1.Enable printer access control(MAC address)
    Select to enable access control to the printer by MAC address.
    Note
    •
    The two types of access control (i.e., by MAC address and by IP address) can be enabled at the same time.
    An access control type is enabled as long as the  Enable printer access control check box is
    selected, regardless of the type currently displayed by selecting in  Printer Access Control
    Type: .
    •
    When both access control types are enabled at the same time, a computer or a network device
    whose address is registered to either list will be allowed access to the printer.
    2.
    Accessible MAC Addresses:
    Shows the registered MAC addresses and any comments.
    3.
    Edit...
    The  Edit Accessible MAC Address  screen is displayed to edit the settings selected in  Accessible
    MAC Addresses: .
    Edit Accessible MAC Address Screen/Add Accessible MAC Address Screen
    4.
    Add...
    The  Add Accessible MAC Address  screen is displayed to register the MAC address of a computer or
    a network device from which to access the printer over the network.
    Important
    •
    Add the MAC address of all computers or network devices within the network from which to
    access the printer. The printer cannot be accessed from a computer or a network device that is
    not on the list.
    5.
    Delete
    Deletes the selected MAC address from the list.
    When Selecting IP address The accessible computers or network devices are specified by their IP addresses. Computers or network
    devices whose IP addresses appear on the list are allowed access.
    268 
    						
    							1.
    Enable printer access control(IP address)
    Select to enable access control to the printer by IP address.
    Note
    •
    The two types of access control (i.e., by MAC address and by IP address) can be enabled at the same time.
    An access control type is enabled as long as the  Enable printer access control check box is
    selected, regardless of the type currently displayed by selecting in  Printer Access Control
    Type: .
    •
    When both access control types are enabled at the same time, a computer or a network device
    whose address is registered to either list will be allowed access to the printer.
    2.
    Accessible IP Addresses:
    Shows the registered IP addresses and any comments.
    3.
    Edit...
    The  Edit Accessible IP Address  screen is displayed to edit the settings selected in  Accessible IP
    Addresses: .
    Edit Accessible IP Address Screen/Add Accessible IP Address Screen
    4.
    Add...
    The  Add Accessible IP Address  screen is displayed to register the IP address of a computer or a
    network device from which to access the printer over the network.
    Important
    •
    Add the IP address of all computers or network devices within the network from which to access
    the printer. The printer cannot be accessed from a computer or a network device that is not on the list.
    •
    Up to 16 IP addresses can be registered. IP addresses specified by Range Specification are
    counted as one address. Use Range Specification when you intend to register 17 or more IP
    addresses.
    269 
    						
    							5.Delete
    Deletes the selected IP address from the list.
    270 
    						
    All Canon manuals Comments (1)

    Related Manuals for Canon printer PIXMA MX492 User Manual