Home > Canon > Printer > Canon printer PIXMA MX492 User Manual

Canon printer PIXMA MX492 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MX492 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1004
    							Printing with Easy SetupThis section describes the simple procedure for setting the 
    Quick Setup tab  so that you can carry out
    appropriate printing on this printer.
    1.
    Check that the printer is turned on
    2.
    Load paper  on the printer
    3.
    Open the printer driver setup window
    4.
    Select a frequently used profile
    In  Commonly Used Settings  on the Quick Setup  tab, select a printing profile suited for the purpose.
    When you select a printing profile, the  Additional Features, Media Type , and Printer Paper Size
    settings are automatically switched to the values that were preset.
    5.
    Select the print quality
    For  Print Quality , select High, Standard , or Draft  according to your purpose.
    321 
    						
    							Important
    •
    The print quality settings that can be selected may differ depending on a printing profile.
    6.
    Complete the setup
    Click  OK.
    When you execute print, the document is printed with settings that match your purpose.
    Important
    •
    When you select the  Always Print with Current Settings  check box, all settings specified on the
    Quick Setup , Main , and  Page Setup  tabs are saved, and you can print with the same settings from the
    next time as well.
    •
    In the  Commonly Used Settings  window, click Save... to register the specified settings .
    322 
    						
    							Note•
    If the paper settings on the printer driver differ from the cassette paper information registered on theprinter, an error may occur. For instructions on what to do if an error occurs, see "
    Paper setting for
    Printing ."
    For details about the cassette paper information to be registered on the printer, see the following:
    •
    Paper Settings on the Printer Driver and the Printer (Media Type)
    •
    Paper Settings on the Printer Driver and the Printer (Paper Size)
    323 
    						
    							Paper Settings on the Printer Driver and the Printer (Media Type)When you use this printer, selecting a media type and 
    paper size  that matches the print purpose will help
    you achieve the best print results.
    You can use the following media types on this printer.
    Commercially available papers
    Media nameMedia Type in the printer driverCassette paper information registered on the printerPlain Paper (including recycled
    paper)Plain PaperPlain paperEnvelopesEnvelopeEnvelopeOther Photo PaperOther Photo PaperOther Photo
    Canon genuine papers (Photo Printing)
    Media name Media Type in the printer driverCassette paper information registered on the printerPhoto Paper Plus Glossy II Photo Paper Plus Glossy IIPlusGlossyIIPhoto Paper Pro Platinum Photo Paper Pro PlatinumProPlatinumPhoto Paper Pro Luster Photo Paper Pro LusterPro LusterPhoto Paper Plus Semi-gloss Photo Paper Plus Semi-glossSemi-glossPhoto Paper Glossy Glossy Photo PaperGlossyMatte Photo Paper Matte Photo PaperMatte
    Canon genuine papers (Business Letter Printing)
    Media name Media Type in the printer driverCassette paper information registered on the printerHigh Resolution Paper High Resolution PaperHigh Res
    324 
    						
    							Paper Settings on the Printer Driver and the Printer (Paper Size)When you use this printer, selecting a paper size that matches the print purpose will help you achieve thebest print results.
    You can use the following paper sizes on this printer.Printer Paper Size in the printer driverCassette paper information registered on the printerLetter 8.5"x11" 22x28cmLetterLegal 8.5"x14" 22x36cmLegalA5A5A4A4B5B54"x6" 10x15cmKG/4"x6"5"x7" 13x18cm2L/5"x7"8"x10" 20x25cm8"x10"Envelope Com 10Env. Com 10Envelope DLEnvelope DLCustom SizeOthers
    325 
    						
    							Various Printing Methods
    Setting a Page Size and Orientation
    Setting the Number of Copies and Printing Order
    Setting the Stapling Margin
    Execute Borderless Printing
    Fit-to-Page Printing
    Scaled Printing
    Page Layout Printing
    Tiling/Poster Printing
    Booklet Printing
    Duplex Printing
    Stamp/Background Printing
    Registering a Stamp
    Registering Image Data to be Used as a Background
    Setting Up Envelope Printing
    Displaying the Print Results before Printing
    Setting Paper Dimensions (Custom Size)
    Editing the Print Document or Reprinting from the Print History
    326 
    						
    							Setting a Page Size and OrientationThe paper size and orientation are essentially determined by the application software. When the page size
    and orientation set for  Page Size and Orientation  on the Page Setup  tab are same as those set with the
    application software, you do not need to select them on the  Page Setup tab.
    When you are not able to specify them with the application software, the procedure for selecting a page size
    and orientation is as follows:
    You can also set page size and orientation on the  Quick Setup tab.1.
    Open the printer driver setup window
    2.
    Select the paper size
    Select a page size from the  Page Size list on the  Page Setup  tab.
    3.
    Set Orientation
    Select  Portrait  or Landscape  for Orientation . Check Rotate 180 degrees  check box when you want to
    perform printing with the original being rotated 180 degrees.
    4.
    Complete the setup
    Click  OK.
    When you execute print, the document will be printed with the selected page size and the orientation.
    Note
    •
    If  Normal-size  is selected for  Page Layout, then Automatically reduce large document that the
    printer cannot output  is displayed.
    Normally, you can leave the check box checked. During printing, if you do not want to reduce large
    documents that cannot be printed on the printer, uncheck the check box.
    327 
    						
    							Setting the Number of Copies and Printing OrderThe procedure for specifying the number of copies and printing order is as follows:
    You can also set the number of copies on the  Quick Setup tab.1.
    Open the printer driver setup window
    2.
    Specify the number of copies to be printed
    For  Copies  on the  Page Setup  tab, specify the number of copies to be printed.
    3.
    Specify the print order
    Check the  Print from Last Page  check box when you want to print from the last page in order, and
    uncheck the check box when you want to print from the first page. Check the  Collate check box when you are printing multiple copies of a document and want to print out
    all pages in each copy together. Uncheck this check box when you want to print all pages with the same
    page number together.
    •
    Print from Last Page :  /Collate : 
    •
    Print from Last Page :  /Collate : 
    •
    Print from Last Page :  /Collate : 
    328 
    						
    							•
    Print from Last Page:  /Collate : 
    4.
    Complete the setup
    Click  OK.
    When you execute print, the specified number of copies will be printed with the specified printing order.
    Important
    •
    When the application software that you used to create the document has the same function, specify the
    settings on the printer driver. However, if the print results are not acceptable, specify the function
    settings on the application software. When you specify the number of copies and the printing order with
    both the application software and this printer driver, the number of copies may be multiplied numbers of
    the two settings or the specified printing order may not be enabled.
    •
    Print from Last Page  appears grayed out and is unavailable when  Tiling/Poster is selected for  Page
    Layout .
    •
    When Booklet  is selected for  Page Layout, Print from Last Page  and Collate  appear grayed out and
    cannot be set.
    •
    When  Duplex Printing (Manual)  is selected, Print from Last Page  appears grayed out and cannot be
    set.
    Note
    •
    By setting both  Print from Last Page  and Collate , you can perform printing so that papers are collated
    one by one starting from the last page.
    These settings can be used in combination with  Normal-size, Borderless , Fit-to-Page , Scaled , and
    Page Layout .
    329 
    						
    							Setting the Stapling Margin
    The procedure for setting the staple side and the margin width is as follows:
    1.
    Open the printer driver setup window
    2.
    Specify the side to be stapledCheck the position of the stapling margin from  Stapling Side on the Page Setup  tab.
    The printer analyzes the  Orientation and Page Layout  settings, and automatically selects the best
    staple position. When you want to change the setting, select from the list.
    3.
    Set the margin width
    If necessary, click  Specify Margin... and set the margin width, and then click  OK.
    330 
    						
    All Canon manuals Comments (1)

    Related Manuals for Canon printer PIXMA MX492 User Manual