Home > Canon > Printer > Canon printer PIXMA MX492 User Manual

Canon printer PIXMA MX492 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MX492 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1004
    							◦Paper has run out:◦
    A different size of paper from that specified by Page size in FAX paper settings  is loaded:
    Load the same size of paper as that specified by  Page size, then press the  OK button.
    •
    You pressed the Stop button to cancel printing of a fax:
    Press the  FAX button to resume printing of the fax.
    Note
    •
    The machine can store up to max. 50 pages* (max. 20 documents) of faxes in the machine's memory.
    * When using ITU-T No.1 chart (Standard mode)
    •
    If the machine's memory becomes full during memory reception, only pages which already have beenreceived are stored in the memory. Print the received faxes stored in the machine's memory, delete
    them from the machine's memory, and have the sender resend the faxes.
    Document Stored in Machine's Memory
    741 
    						
    							Receiving Faxes Using Useful Functions
    Remote Reception
    Rejecting Fax Reception
    Using the Caller ID Service to Reject Calls
    742 
    						
    							Remote ReceptionIf the machine is located away from the telephone, pick up the handset of the telephone connected to the
    machine and dial 25 (the remote reception ID) to receive faxes (remote reception).•
    If you use a rotary pulse line, temporarily switch your telephone to tone dialing. For details on how to switch to tone dialing, refer to your telephone's instruction manual.
    •
    If you have an answering machine connected to the machine that can carry out remote controloperations, the security code for this function may be the same as the remote reception ID. In this case,
    change the remote reception ID in  Remote RX ID in Remote RX  in Adv. FAX settings  under Fax
    settings .
    Adv. FAX settings
    Remote reception can be disabled.
    743 
    						
    							Rejecting Fax ReceptionYou can set the machine to reject faxes with no sender information or those from specific senders.
    Select one of the following conditions to reject faxes.•
    Faxes with no caller identification.
    •
    Faxes from senders not registered in the machine's directory.
    •
    Faxes from senders registered in the machine as rejected numbers.
    Select a fax rejection condition following the procedure below.
    1.
    Make sure that the machine is turned on.
    2.
    Press the  Setup button.
    The  Setup menu  screen is displayed.
    3.
    Use the  button to select  Fax settings, then press the  OK button.
    4.
    Use the  button to select  Security control , then press the OK button.
    5.
    Use the  button to select  FAX RX reject, then press the  OK button.
    6.
    Use the  button to select  ON, then press the  OK button.
    7.
    Use the  button to select the fax rejection condition, then press the  OK button.
    No sender info. Rejects faxes with no caller identification.
    Not in directory Rejects faxes from the senders not registered in the machine's directory.
    Rejected numbers Rejects faxes from the senders registered in the machine as rejected numbers.
    For details on how to register the rejected number, see 
    Registering the Rejected Number .
    Note
    •
    The * (asterisk) on the LCD indicates the current setting.
    •
    When the machine rejects reception,  Reception rejected is displayed on The Fax standby screen.
    •
    Faxes with no caller identification are also rejected when the setting other than  No sender info. is
    selected.
    Registering the Rejected Number Register the rejected number following the procedure below.
    1.
    When the confirmation screen to register the rejected number is displayed, use the 
    button to select  Yes, then press the  OK button.
    744 
    						
    							2.Use the  button to select a registration number, then press the OK button.3.
    Use the  button to select a registration method, then press the  OK button.
    Register the rejected number depending on the registration method.
    •
    From call log (OUT)
    When you select this registration method, the screen to select the fax/telephone number from
    the outgoing call logs is displayed.
    1.
    Use the  button to select a fax/telephone number, then press the  OK button.
    2.
    Press the  OK button again.
    •
    From call log (IN)
    When you select this registration method, the screen to select the fax/telephone number or the name from the incoming call logs is displayed.
    1.
    Use the  button to select a fax/telephone number or a name, then press the  OK button.
    2.
    Press the  OK button again.
    Note
    •
    This registration method may not be available depending on the country or region of
    purchase.
    •
    Direct entry
    When you select this registration method, the screen to register the fax/telephone number is displayed.
    Use the Numeric buttons to enter the fax/telephone number you want to register, then press the
    OK  button.
    Note
    •
    To register another rejected number, use the  button to select another registration number, then
    register the rejected number.
    You can register up to 10 rejected numbers.
    •
    To return to the Fax standby screen, press the  FAX button.
    •
    You can print the list of rejected numbers (REJECTED NUMBER LIST).
    Summary of Reports and Lists
    •
    To change the registered rejected number, display the screen to register the fax/telephone number in
    the same operation, change rejected number, then press the  OK button.
    •
    To delete the registered rejected number, display the screen to register the fax/telephone number in
    the same operation, press the  Back button repeatedly to delete the rejected number, then press the
    OK  button.
    745 
    						
    							•You can register the rejected number in Rejected numbers in TEL no. registration  under Fax
    settings .
    746 
    						
    							Using the Caller ID Service to Reject CallsIf you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's IDmatches the condition specified in this setting, the machine rejects the phone call or fax reception from the
    sender.
    Note
    •
    This setting may not be supported depending on the country or region of purchase.
    Contact your telephone company to confirm whether it provides this service.
    Specify the setting following the procedure below.
    1.
    Make sure that the machine is turned on.
    2.
    Press the  Setup button.
    The  Setup menu  screen is displayed.
    3.
    Use the  button to select  Fax settings, then press the  OK button.
    4.
    Use the  button to select  Security control , then press the OK button.
    5.
    Use the  button to select  Caller rejection, then press the OK button.
    6.
    Use the  button to select  Subscribed, then press the  OK button.
    You can now perform settings for  Caller rejection.
    7.
    Use the  button to select whether to reject a phone call or fax reception from an
    anonymous number, then press the  OK button.
    8.
    Use the  button to select whether to reject a phone call or fax reception out of the
    subscribed service area, then press the  OK button.
    9.
    Use the  button to select whether to reject a phone call or fax reception from the
    specified numbers, then press the  OK button.
    If you select  Reject, you can register the fax/telephone number to reject.
    When  Register rejected no.?  is displayed on the LCD, use the 
     button to select Yes, then register
    the fax/telephone number to reject.
    For details on how to register the rejected number, see 
    Registering the Rejected Number .
    Note
    •
    Even if you select Reject, the machine rings once.
    (The machine may not ring depending on the country or region of purchase.)
    747 
    						
    							Other Useful Fax Functions
    Using the Information Services
    Transmission/Reception of Faxes Using ECM
    Document Stored in Machine's Memory
    Summary of Reports and Lists
    748 
    						
    							Using the Information ServicesYou can use various information services such as provided by banks, and make airline reservations or hotel
    reservations. Since these services require tone dialing to use their services, you need to temporarily switch
    to tone dialing if your machine is connected to a rotary pulse line.
    Using the Touch Tone Line
    Using the Rotary Pulse Line
    Important
    •
    You may need to contract with the service providers for some information services. For details, contact the service providers.
    Using the Touch Tone Line
    •
    Dialing by Using the On Hook Dial Function
    Note
    •
    You can use the on hook dial function only when  Hook setting in Security control  under Fax
    settings  is set to  Enable.
    Security control
    1.
    Make sure that the machine is turned on.
    2.
    Press the  FAX button.
    The Fax standby screen is displayed.
    3.
    Press the  Color button or the  Black button.
    4.
    Use the Numeric buttons to dial the number of the information service.
    5.
    When the recorded message for the information service answers, use the Numeric buttons to
    press the numbers in accordance with the message.
    6.
    Press the  Stop button to finish using the service.
    •
    Dialing by Using the Telephone Connected to the Machine
    1.
    Make sure that the machine is turned on.
    2.
    Press the  FAX button.
    The Fax standby screen is displayed.
    3.
    Lift the handset of the telephone.
    4.
    Use the telephone to dial the number of the information service.
    5.
    When the recorded message for the information service answers, use the telephone to press the numbers in accordance with the message.
    6.
    Hang up the handset to finish using the service.
    749 
    						
    							Using the Rotary Pulse Line•
    Dialing by Using the On Hook Dial Function
    Note
    •
    You can use the on hook dial function only when Hook setting in Security control  under Fax
    settings  is set to  Enable.
    Security control
    1.
    Make sure that the machine is turned on.
    2.
    Press the  FAX button.
    The Fax standby screen is displayed.
    3.
    Press the  Color button or the  Black button.
    4.
    Use the Numeric buttons to dial the number of the information service.
    5.
    When the recorded message for the information service answers, press the  Tone button to
    switch to tone dialing.
    6.
    Use the Numeric buttons to press the numbers in accordance with the message.
    7.
    Press the  Stop button to finish using the service.
    •
    Dialing by Using the Telephone Connected to the Machine
    1.
    Make sure that the machine is turned on.
    2.
    Press the  FAX button.
    The Fax standby screen is displayed.
    3.
    Lift the handset of the telephone.
    4.
    Use the telephone to dial the number of the information service.
    5.
    When the recorded message for the information service answers, use the telephone to switch to tone dialing.
    When you dial the number of the information service using the telephone connected to the
    machine, you cannot use the machine to switch to tone dialing. For instructions on how to switch
    to tone dialing, refer to your telephone's instruction manual.
    6.
    Use the telephone to press the numbers in accordance with the message.
    7.
    Hang up the handset to finish using the service.
    750 
    						
    All Canon manuals Comments (1)

    Related Manuals for Canon printer PIXMA MX492 User Manual