Home > Canon > Printer > Canon printer PIXMA MX492 User Manual

Canon printer PIXMA MX492 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MX492 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1004
    							Notice for Unplugging the Power CordTo unplug the power cord, follow the procedure below.
    Important
    •
    When you unplug the power cord, press the  ON button, then confirm that the  POWER lamp is off.
    Unplugging the power cord while the  POWER lamp is lit or flashing may cause drying or clogging of the
    print head and print quality may be reduced.
    •
    If the power cord is unplugged, the date/time settings will be reset and all documents stored in the machine's memory will be lost. Send or print a necessary document before unplugging the power cord.
    1.
    Press the  ON button to turn the machine off.
    2.
    Confirm that the  POWER lamp is off.
    3.
    Unplug the power cord.
    The specification of the power cord differs depending on the country or region of use.
    121 
    						
    							LCD and Operation PanelThe mode button (A) on the operation panel allows you to switch between the copy mode, scan mode, fax
    mode, and setup menu screen.
    Pressing the  Menu button (B) in the respective modes shows the menu screen to select various functions or
    settings.
    Selecting a Menu or Setting Item
    On the menu screen or settings screen, use the 
     or  button (C) to select an item or option, then press
    the  OK button (D) to proceed with the procedure.
    To return to the previous screen, press the  Back button (E).
    Example: Changing the scan contrast for faxing.
    Press the  Menu button in the Fax standby screen.
    Press the  or  button (C) to select  FAX TX settings.
    Press the OK button (D).
    122 
    						
    							Select Scan contrast , press the OK button (D).
    Use the  or  button (C) to change the contrast, then press the  OK button (D).
    123 
    						
    							Entering Numbers, Letters, and SymbolsUse the Numeric buttons to enter or edit such information as unit name, a recipient's name for the directory,
    etc.
    Switching the Input Mode
    Each time the  Tone button is pressed, the input mode is switched in the following order: lowercase mode
    (:a), uppercase mode (:A), then numeric mode (:1).
    The current input mode appears at the upper right corner of the LCD.
    Entering Numbers, Letters, and Symbols
    Press the  Tone button to switch the input mode.
    Use the Numeric buttons to enter the desired characters.
    •
    To insert a space
    Press the 
     button five times.
    •
    To delete the last entered character
    Press the  Back button.
    Editing Entered Numbers, Letters, and Symbols
    Press the or  button to move the cursor under the position you want to edit.
    •
    To insert a space
    Press the 
     button five times.
    •
    To insert a character
    Move the cursor under the character to the right of the insertion position, then enter the character. The
    character on the cursor will move to the right and the new character will be inserted.
    •
    To delete a character
    Move the cursor under the character, then press the  Back button.
    List of Characters Assigned to Each Numeric Button
    ButtonLowercase mode (:a)Uppercase mode(:A)Numeric mode(:1)Fax/Telephone no.  11abcåäáàãâæçABCÅÄÁÀÃÂÆÇ22
    124 
    						
    							defëéèêDEFËÉÈÊ33gh i ï í ì îGH I Ï Í Ì Î44jklJKL55mnoñøöóòõôMNOÑØÖÓÒÕÔ66pqrsþPQRSÞ77tuvüúùûTUVÜÚÙÛ88wxyzýWXYZÝ99  00. @ - _ SP*1
     # ! " , ; : ^ ` = / | ' ? $ % & + ( ) [ ] { } < > \ *2
     ~*2#Switch the input mode.
    *1 "SP" indicates a space.
    *2 Displayed only when entering characters in the LAN settings.
    125 
    						
    							Loading Paper / Originals
    Loading Paper
    Loading Originals
    126 
    						
    							Loading Paper
    Loading Plain Paper / Photo Paper
    Loading Envelopes
    Media Types You Can Use
    Media Types You Cannot Use
    Printing Area
    127 
    						
    							Loading Plain Paper / Photo PaperYou can load plain paper or photo paper.
    Important
    •
    If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial
    print, it can cause paper jams.
    Note
    •
    We recommend Canon genuine photo paper for printing photos.
    For details on the Canon genuine paper, see 
    Media Types You Can Use .
    •
    You can use general copy paper.
    For the page size and paper weight you can use for this machine, see 
    Media Types You Can Use .
    1.
    Prepare paper.
    Align the edges of paper. If paper is curled, flatten it.
    Note
    •
    Align the edges of paper neatly before loading. Loading paper without aligning the edges may
    cause paper jams.
    •
    If paper is curled, hold the curled corners and gently bend them in the opposite direction until the paper becomes completely flat.
    For details on how to flatten curled paper, see "Load the paper after correcting its curl." in 
    Paper Is
    Smudged/Printed Surface Is Scratched .
    •
    When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at a
    time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper
    and reduce the print quality.
    2.
    Open the front cover (A) gently.
    The paper output tray (B) opens.
    128 
    						
    							3.
    Grab the right and left sides of the front cover and pull out the cassette until it stops.
    4.
    Use the right paper guide (C) to slide both paper guides all the way out.
    5.
    Load the paper in the center of the cassette WITH THE PRINT SIDE FACING DOWN.
    Push the paper stack all the way to the back of the cassette.
    * The above figure shows the machine with the paper output tray raised.
    Important
    •
    Always load paper in the portrait orientation (D). Loading paper in the landscape orientation (E) can cause paper jams.
    129 
    						
    							6.
    Slide the right paper guide (C) to align the paper guides with both sides of the paper stack.
    Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
    * The above figure shows the machine with the paper output tray raised.
    Note
    •
    Do not load sheets of paper higher than the load limit mark (F).
    •
    Keep the paper stack height below the tabs (G) of the paper guides.
    * The above figure shows the machine with the paper output tray raised.
    •
    Load small size paper, such as 4" x 6" (10 x 15 cm), by pushing it in all the way to the back of the cassette.
    130 
    						
    All Canon manuals Comments (1)

    Related Manuals for Canon printer PIXMA MX492 User Manual