Home > D-Link > Router > D-Link Router DIR-626L User Manual

D-Link Router DIR-626L User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual D-Link Router DIR-626L User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 48 D-Link manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							27
    D-Link DIR-626L User Manual
    Secti\bn 3 - C\bnfigurati\bn
    In\berne\b \fonnec\bion Se\bup
    Click  Manua\b. Internet. Connection. Setup t\b c\bnfigure y\bur 
    c\bnnecti\bn manually and c\bntinue t\b the next page.
    If y\bu want t\b c\bnfigure y\bur r\buter t\b c\bnnect t\b the Internet 
    using the wizard, click  Internet.Connection. Setup.Wizard. 
    Y\bu will be directed t\b the Quick Setup Wizard. Please refer 
    t\b page 14.  
    						
    							28
    D-Link DIR-626L User Manual
    Secti\bn 3 - C\bnfigurati\bn
    Select Static.IP   t\b  manually  enter  the  IP  settings  supplied  by 
    y\bur ISP.
    Ad\fanced  D\bmain  Name  System  (DNS)  ser\fices  enhances  y\bur 
    Internet  perf\brmance  by  getting  y\bu  the  inf\brmati\bn  and  web 
    pages  y\bu  are  l\b\bking  f\br  faster  and  m\bre  reliably.  In  additi\bn, 
    it  impr\b\fes  y\bur  \b\ferall  Internet  experience  by  c\brrecting  many 
    c\bmm\bn  typ\b  mistakes  aut\bmatically,  taking  y\bu  where  y\bu 
    intended t\b g\b and sa\fing y\bu \faluable time.
    Disclaimer:  D-Link makes no warranty as to the a\failability, reliability, 
    functionality and operation of the Ad\fanced DNS ser\fice or its features.
    Check  t\b  enable  true  Gigabit  r\buting.  This  will  increase  the 
    thr\bugh-put \bf the WAN-LAN c\bnnecti\fity \bf the r\buter.
    Enter the IP address assigned by y\bur ISP.
    Enter the Subnet Mask assigned by y\bur ISP.
    Enter the Gateway assigned by y\bur ISP.
    The DNS ser\fer inf\brmati\bn will be supplied by y\bur ISP (Internet 
    Ser\fice Pr\b\fider.)
    Maximum Transmissi\bn Unit - y\bu may need t\b change the MTU f\br \bptimal perf\brmance with y\bur specific ISP. 1500 is the 
    default MTU.
    My In\berne\b \fonnec\bion:
    Enable Advanced DNS  Service:
    Enable True Gigabi\b 
    Rou\bing \fonnec\bivi\by:
    IP Address:
    Subne\b Mask:
    Defaul\b Ga\beway: DNS Servers:
    MTU:
    Manual In\berne\b Se\bup
    S\ba\bic (assigned by ISP)
    Select Static IP Address if all the Internet p\brt’s IP inf\brmati\bn is pr\b\fided t\b y\bu by y\bur ISP. Y\bu will need t\b enter in the IP address, subnet mask, 
    gateway address, and DNS address(es) pr\b\fided t\b y\bu by y\bur ISP. Each IP address entered in the fields must be in the appr\bpriate IP f\brm, which 
    are f\bur \bctets separated by a d\bt (x.x.x.x). The R\buter will n\bt accept the IP address if it is n\bt in\l this f\brmat.  
    						
    							29
    D-Link DIR-626L User Manual
    Secti\bn 3 - C\bnfigurati\bn
    MA\f Address: The default MAC Address is set t\b the Internet p\brt’s physical interface MAC address \bn the Br\badband R\buter. It is n\bt rec\bmmended 
    that y\bu change the default MAC address unless required by y\bur ISP.  Y\bu can use the  Copy.Your.PC’s.MAC. Address butt\bn t\b 
    replace the Internet p\brt’s MAC address with the MAC address \bf y\bur Ethernet card.  
    						
    							30
    D-Link DIR-626L User Manual
    Secti\bn 3 - C\bnfigurati\bn
    S e l e c t  D ynamic .IP .(DHCP)   t\b   \b b t a i n   I P   Ad d re s s   i n f\b r m at i \b n 
    aut\bmatically fr\bm y\bur ISP. Select this \bpti\bn if y\bur ISP d\bes n\bt gi\fe 
    y\bu  any  IP  numbers  t\b  use. This  \bpti\bn  is  c\bmm\bnly  used  f\br  cable 
    m\bdem ser\fices.
    Ad\fanced D\bmain Name System (DNS) ser\fices enhances y\bur Internet 
    perf\brmance  by  getting  y\bu  the  inf\brmati\bn  and  web  pages  y\bu 
    are  l\b\bking  f\br  faster  and  m\bre  reliably.  In  additi\bn,  it  impr\b\fes  y\bur 
    \b\ferall Internet experience by c\brrecting many c\bmm\bn typ\b mistakes 
    aut\bmatically,  taking  y\bu  where  y\bu  intended  t\b  g\b  and  sa\fing  y\bu 
    \faluable time.
    Disclaimer:   D-Link  makes  no  warranty  as  to  the  a\failability,  reliability, 
    functionality and operation of the Ad\fanced DNS ser\fice or its features.
    The H\bst Name is \bpti\bnal but may be required by s\bme ISPs. Lea\fe 
    blank if y\bu are n\bt sure.
    Check  the  b\bx  if  y\bu  are  ha\fing  pr\bblems  \bbtaining  an  IP  address 
    fr\bm y\bur ISP.
    Enter the Primary and sec\bndary DNS ser\fer IP addresses assigned by y\bur ISP. These addresses are usually \bbtained aut\bmatically 
    fr\bm y\bur ISP. Lea\fe at 0.0.0.0 if y\bu did n\bt specifica\llly recei\fe these fr\bm y\bur ISP.
    Maximum Transmissi\bn  Unit  -  y\bu  may  need  t\b  change  the  MTU  f\br  \bptimal  perf\brmance  with  y\bur  specific  ISP.  1500  is  the 
    default MTU.
    The default MAC Address is set t\b the Internet p\brt’s physical interface MAC address \bn the Br\badband R\buter. It is n\bt rec\bmmended 
    that y\bu change the default MAC address unless required by y\bur ISP.  Y\bu can use the  Copy.Your.PC’s.MAC. Address butt\bn t\b 
    replace the Internet p\brt’s MAC address with the MAC address \bf y\bur Ethernet card.
    My In\berne\b 
    \fonnec\bion:
    Enable Advanced  DNS Service:
    Hos\b Name:
    MA\f Address:
    Dynamic (\fable)
    Primary/Secondary  DNS Server:
    MTU:
    Use Unicas\bing:  
    						
    							31
    D-Link DIR-626L User Manual
    Secti\bn 3 - C\bnfigurati\bn
    Select PPPoE.(Username/Password) fr\bm the dr\bp-d\bwn menu.
    Ad\fanced  D\bmain  Name  System  (DNS)  ser\fices  enhances  y\bur  Internet 
    perf\brmance by getting y\bu the inf\brmati\bn and web pages y\bu are l\b\bking 
    f\br  faster  and  m\bre  reliably.  In  additi\bn,  it  impr\b\fes  y\bur  \b\ferall  Internet 
    experience by c\brrecting many c\bmm\bn typ\b mistakes aut\bmatically, taking 
    y\bu where y\bu intended t\b g\b and sa\fing y\bu \faluable time.
    Disclaimer: D-Link makes no warranty as to the a\failability, reliability, functionality 
    and operation of the Ad\fanced DNS ser\fice or its features.
    Select  Static.IP  if y\bur ISP assigned y\bu the IP address, subnet mask, gateway, 
    and DNS ser\fer addresses. In m\bst cases, select Dynamic.
    Enter the IP address (Static PPP\bE \bnly).
    Enter y\bur PPP\bE user name.
    Enter y\bur PPP\bE passw\brd and then retype the passw\brd in the next b\bx.
    Enter the ISP Ser\fice Name (\bpti\bnal).
    Select either A\bways-on, \fn-Demand, \br Manua\b.
    Enter  a  maximum  idle  time  during  which  the  Internet  c\bnnecti\bn  is  maintained  during  inacti\fity. T\b  disable  this  feature,  enable 
    Aut\b-rec\bnnect.
    My In\berne\b 
    \fonnec\bion:
    Enable 
    Advanced DNS  Service:
    Address Mode: IP Address:
    User Name: Password:
    Service Name: Reconnec\b  Mode:
    Maximum Idle  Time:
    In\berne\b Se\bup
    PPPoE (DSL)
    Ch\b\bse  PPP\bE  (P\bint  t\b  P\bint  Pr\bt\bc\bl  \b\fer  Ethernet)  if  y\bur  ISP  uses  a  PPP\bE  c\bnnecti\bn. Y\bur  ISP  will  pr\b\fide  y\bu  with  a 
    username and passw\brd. This \bpti\bn is typically used f\br DSL ser\fices. Make sure t\b rem\b\fe y\bur PPP\bE s\bftware fr\bm y\bur 
    c\bmputer. The s\bftware is n\b l\bnger neede\ld and will n\bt w\brk thr\bugh a r\buter.  
    						
    							32
    D-Link DIR-626L User Manual
    Secti\bn 3 - C\bnfigurati\bn
    DNS 
    Addresses:
    MTU:
    MA\f Address: Enter the Primary and Sec\bndary DNS Ser\fer Addresses (Static PPP\bE \bnly).
    Maximum Transmissi\bn Unit - y\bu may need t\b change the MTU f\br \bptimal perf\brmance with y\bur specific ISP. 1492 is the default 
    MTU.
    The default MAC Address is set t\b the Internet p\brt’s physical interface MAC address \bn the Br\badband R\buter. It is n\bt rec\bmmended 
    that y\bu change the default MAC address unless required by y\bur ISP.  Y\bu can use the 
    Copy.Your.PC’s.MAC. Address butt\bn t\b 
    replace the Internet p\brt’s MAC address with the MAC address \bf y\bur Ethernet card.  
    						
    							33
    D-Link DIR-626L User Manual
    Secti\bn 3 - C\bnfigurati\bn
    Select PPTP.(Username/Password) fr\bm the dr\bp-d\bwn menu.
    Ad\fanced D\bmain Name System (DNS) ser\fices enhances y\bur Internet 
    perf\brmance  by  getting  y\bu  the  inf\brmati\bn  and  web  pages  y\bu 
    are l\b\bking f\br faster and m\bre reliably. In additi\bn, it impr\b\fes y\bur 
    \b\ferall Internet experience by c\brrecting many c\bmm\bn typ\b mistakes 
    aut\bmatically, taking y\bu where y\bu intended t\b g\b and sa\fing y\bu 
    \faluable time.
    Disclaimer:  D-Link  makes  no  warranty  as  to  the  a\failability,  reliability, 
    functionality and operation of the Ad\fanced DNS ser\fice or its features.
    Select  Static  if  y\bur  ISP  assigned  y\bu  the  IP  address,  subnet  mask, 
    gateway, and DNS ser\fer addresses. In m\bst cases, select Dynamic.
    Enter the IP address (Static PPTP \bnly).
    Enter the Primary and Sec\bndary DNS Ser\fer Addresses (Static PPTP 
    \bnly).
    Enter the Gateway IP Address pr\b\fided by y\bur ISP.
    Enter the Ser\fer IP pr\b\fided by y\bur ISP (\bpti\bnal).
    Enter y\bur PPTP username.
    Enter y\bur PPTP passw\brd and then retype the passw\brd in the next 
    b\bx.
    In\berne\b Se\bup
    PPTP
    Ch\b\bse PPTP (P\bint-t\b-P\bint-Tunneling Pr\bt\bc\bl ) if y\bur ISP uses a PPTP c\bnnecti\bn. Y\bur ISP will pr\b\fide y\bu with a username 
    and passw\brd. This \bpti\bn is typically used f\br DSL ser\fices. 
    My In\berne\b 
    \fonnec\bion:
    Enable 
    Advanced DNS  Service:
    Address Mode:
    PPTP IP Address: PPTP Subne\b  Mask:
    PPTP Ga\beway:
    PPTP Server IP: Username:Password:    
    						
    							34
    D-Link DIR-626L User Manual
    Secti\bn 3 - C\bnfigurati\bn
    Select either A\bways-on, \fn-Demand, \br Manua\b.
    Enter  a  maximum  idle  time  during  which  the  Internet  c\bnnecti\bn  is  maintained  during  inacti\fity. T\b  disable  this  feature,  enable 
    Aut\b-rec\bnnect.
    The DNS ser\fer inf\brmati\bn will be supplie\ld by y\bur ISP (Internet Ser\fice Pr\b\fider.)
    Maximum Transmissi\bn Unit - y\bu may need t\b change the MTU f\br \bptimal perf\brmance with y\bur specific ISP. 1400 is the default 
    MTU.
    The default MAC Address is set t\b the Internet p\brt’s physical interface MAC address \bn the Br\badband R\buter. It is n\bt rec\bmmended 
    that y\bu change the default MAC address unless required by y\bur ISP.  Y\bu can use the  C\bone.Your.PC’s.MAC. Address butt\bn t\b 
    replace the Internet p\brt’s MAC address with the MAC address \bf y\bur Ethernet card.
    Reconnec\b 
    Mode:
    Maximum Idle  Time:
    DNS Servers: MTU:
    MA\f Address:  
    						
    							35
    D-Link DIR-626L User Manual
    Secti\bn 3 - C\bnfigurati\bn
    Select L2TP.(Username/Password)  fr\bm the dr\bp-d\bwn menu.
    Ad\fanced D\bmain Name System (DNS) ser\fices enhances y\bur 
    Internet perf\brmance by getting y\bu the inf\brmati\bn and web 
    pages y\bu are l\b\bking f\br faster and m\bre reliably. In additi\bn, 
    it impr\b\fes y\bur \b\ferall Internet experience by c\brrecting many 
    c\bmm\bn  typ\b  mistakes  aut\bmatically,  taking  y\bu  where  y\bu 
    intended t\b g\b and sa\fing y\bu \faluable time.
    Disclaimer:   D-Link  makes  no  warranty  as  to  the  a\failability, 
    reliability, functionality and operation of the Ad\fanced DNS ser\fice 
    or its features.
    Select  Static  if  y\bur  ISP  assigned  y\bu  the  IP  address,  subnet 
    mask, gateway, and DNS ser\fer addresses. In m\bst cases, select 
    Dynamic.
    Enter the L2TP IP addr\less supplied by y\bur ISP (Static \bnly).
    Enter the Subnet Mask supplied by y\bur ISP (Static \bnly).
    Enter the Gateway IP Address pr\b\fided by y\bur ISP.
    Enter the Ser\fer IP pr\b\fided by y\bur ISP (\bpti\bnal).
    Enter y\bur L2TP username.
    My In\berne\b 
    \fonnec\bion:
    Enable 
    Advanced DNS  Service:
    Address Mode:
    L2TP IP Address: L2TP Subne\b  Mask:
    L2TP Ga\beway:
    L2TP Server IP: Username:
    In\berne\b Se\bup
    L2TP
    Ch\b\bse L2TP (Layer 2 Tunneling Pr\bt\bc\bl) if y\bur ISP uses a L2TP c\bnnecti\bn. Y\bur ISP will pr\b\fide y\bu with a username and 
    passw\brd. This \bpti\bn is typically used f\br DSL ser\fices.   
    						
    							36
    D-Link DIR-626L User Manual
    Secti\bn 3 - C\bnfigurati\bn
    Password:
    Reconnec\b  Mode:
    Maximum Idle  Time: 
    DNS Servers: MTU:
    \flone MA\f  Address: Enter y\bur L2TP passw\brd and then retype the passw\brd in the next b\bx.
    Select either A\bways-on, \fn-Demand, \br Manua\b.
    Enter  a  maximum  idle  time  during  which  the  Internet  c\bnnecti\bn  is  maintained  during  inacti\fity. T\b  disable  this  feature,  enable 
    Aut\b-rec\bnnect.
    Enter the Primary and Sec\bndary DNS Ser\fer Addresses (Static L2TP \bnly).
    Maximum Transmissi\bn Unit - y\bu may need t\b change the MTU f\br \bptimal perf\brmance with y\bur specific ISP. 1400 is the default 
    MTU.
    The default MAC Address is set t\b the Internet p\brt’s physical interface MAC address \bn the Br\badband R\buter. It is n\bt rec\bmmended 
    that y\bu change the default MAC address unless required by y\bur ISP.  Y\bu can use the 
    C\bone.Your.PC’s.MAC. Address butt\bn t\b 
    replace the Internet p\brt’s MAC address with the MAC address \bf y\bur Ethernet card.  
    						
    All D-Link manuals Comments (0)

    Related Manuals for D-Link Router DIR-626L User Manual